5050高亮灯珠规格
书
关于书的成语关于读书的排比句社区图书漂流公约怎么写关于读书的小报汉书pdf
? Customer:
Technical Data Sheet ---- Preliminary
Luminosity Full Color/Single Color LED(5050 )
Contents
1. Features
2. Applications
3. Package outline dimension
4. Absolute maximum ratings
5. Electrical-optical characteristics 6. Typical electro-optical characteristics curves 7. Tapping specifications
8. Package method
9. BIN code description
10. BIN range
11. Reliability test items and conditions 12. Precautions for use
13. Hazard substance analysis
Customer confirm Approved by Issued By
※Features
.White package with black surface.
.Optical indicator.
.Colorless clear window.
.Ideal for backlight and light pipe application. .Interior reflector.
.Wide viewing angle.
.Suitable for vapor-phase reflow, infrared reflow and wave solder processes.
.Computable with automatic placement equipment. .Pb-free.
.The product itself will remain within RoHS compliant version
※ Applications:
.Amusement equipment.
.Information boards.
.Flashlight for digital camera of cellular phone.
Device Selection Guide
Chip Emiteed Resin Color
Type Material
R A1GaInP Brilliant Red
G InGaN Brilliant Green
B InGaN Blue
※ ?Package Outline Dimension:
Notes: All dimensions in mm tolerance is ?0.1mm unless otherwise noted.
※ Absolute Maximum Ratings(Ta=25 ?)
※ Electrical-optical characteristics(Ta=25 ?)
Note:
1. Tolerance of Luminous Intensity: ?10% 2. Tolerance of Dominant Wavelength: ?1nm 3. Tolerance of Forward Voltage: ?0.1V
※BIN range
Luminous intensity (tolerance is ?10%@ If= 60 60mA): mA):
Note:
1. Tolerance of Luminous Intensity: ?10% 2. Tolerance of Dominant Wavelength:?1nm
※ Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level:90%
LTPD:10%
Typical Electro-Optical Characteristics Curves (G)
Typical Electro-Optical Characteristics Curves (R)
Typical Electro-Optical Characteristics Curves (B)
※ Precautions for use ::
1. Over-current-proof
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or
less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment: 60?5 fo? r 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two
times.
3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Note:
a) Reflow soldering should not be done more than two times.
b) Don’t put stress on the LEDs when soldering. c) Don’t warp the circuit board before it have been returned to normal ambient
Temperature
Time
2min, Max..
5? /Sec. Max.
4?/Sec. Max.
5 Sec. Max.
260? Max.
160~180?
Temperature
TT
TTime ime
120~180 sec.
Preheat
245 ?5? within 5 sec.
Soldering heat Max. 260 ?
120~150?
conditions after soldering. Loaded quantity: 1000 pcs/reel
※ Package Method:(unit:mm)
Note: Tolerance unless mentioned is ?0.1mm,Unit=mm