无线网络ip地址冲突产生的原因以及解决方法)（Causes and solutions of IP address conflicts in wireless networks）

无线网络ip地址冲突产生的原因以及解决 方法 快递客服问题件处理详细方法山木方法pdf计算方法pdf华与华方法下载八字理论方法下载 )（Causes and solutions of IP address conflicts in wireless networks） 无线网络ip地址冲突产生的原因以及解决方法)(Causes and solutions of IP address conflicts in wireless networks) 1. set up the router, and if your IP is static, please fill in your information with security tips, for example: WAN port connection type: static IP address: 124.254.1.xxx Subnet mask: 255.255.255.248 Gateway: 124.254.1.1xx (optional) Packet MTU:1500 (default value is 1500, if not necessary, please do not change) DNS server: 211.161.xx.84 (optional) Alternate DNS server: 219.141.1x6.10 (optional) These settings are completed, basically set up, and the router's MAC address is best not to, unless the ISP provider is bound MAC, this situation is very little. For example, the following interface is the router's MAC address: this page sets the router's MAC address to the wan. MAC address: 00-14-78-03-50-99 The current MAC address for managing PC: 00-0A-EB-6F-49-2C Note: only computers in LAN can use the "clone MAC address" function. The next step is whether you open DHCP, and if you open your LAN computer, you can automatically get the IP address, not so strenuous, set the IP address. If you have to set a static IP address to your computer in the LAN, then you should determine what the default gateway for the router is For example, the following settings: LAN port settings This page sets the basic network parameters for the LAN port. MAC address: 00-14-78-03-50-98 IP address: 192.168.0.1 Subnet mask: 255.255.255.0 Note: when the LAN IP parameter (including IP address, subnet mask) change, to ensure that the DHCP server can work normally, should ensure that the address pool, set the DHCP server static address with the new LAN and IP are in the same segment, and restart the router. Generally default is 192.168.0.1, without this setting, you automatically get the IP address, look at it. LAN computer settings: IP address column filled: 192.168.0.2 - 192.168.0.254 can. The subnet mask is the same as in the router. Gateway is the IP 192.168.0.1 in the router. DNS fill in the DNS in the 192.168.0.1 or router. Best to fill in the router inside the DNS, so that routers parse errors can also access the internet. Use wireless rub card network, encounter IP conflict, do not worry, and now tell you how to solve the wireless IP conflict tips Have rub card, you can free Internet anytime, anywhere, but once you encounter IP flush, you will not solve, but also can not go up the network, how to do? Don't worry, now let me tell you some tips for resolving the wireless IP conflict. In the article, we summarize the content of wireless IP conflict. Well, we understand the causes of the conflict, and the relevant solutions, then take a look at the specific content of it. Wireless IP conflict is the fault that we often encounter when using wireless networks. So, what's the cause of this? And how should we solve it? Now let's take a look at the details. In some wireless networks, due to the large number of clients, in order to facilitate the management of these machines, many administrators use wireless routers to provide DHCP services to provide TCP/IP configuration parameters for the client, such as the IP address, gateway address and DNS server. But if your wireless network, some computer must manually specify the TCP/IP parameter configuration, the DHCP server provides a dynamic IP address and manually specify the static IP address if you do not have DHCP parameters coexist, the rational allocation of the wireless router in the server, it is easy to make IP address conflict. How does wireless IP conflict arise? As a wireless network in the management of the 50 computer, including 5 computer due to special needs, set to use the static IP address manually, IP addresses used for "192.168.1.10~192.168.1.14", The other 45 computer IP address parameter information through a wireless router DHCP service. But if your wireless router in the DHCP service address pool "parameter setting is not reasonable, contains more than 5 computer using the IP address, it is possible to produce IP address conflict. Causes of IP address conflict is very simple, such as using a static IP address "computer A 192.168.1.11" is not on, when the wireless network in a computer B for the IP address to the wireless router's DHCP server, DHCP server "192.168.1.11" this IP address is currently free, without any use of computer, it is may be the IP address assigned to the IP address of the computer application B. When the computer A boot after on-line, you will find there is other computer using the "192.168.1.11" this IP address, so it will produce IP address conflict. To solve the conflict of wireless IP is required to set the DHCP parameters Know the wireless network IP address conflict is how to produce, to prevent this from happening is very simple, as long as you reasonably set up in the DHCP server address pool parameters. You know, the static IP address mode of computer use which IP address, in order to avoid the occurrence of IP address conflict, in the configuration of the DHCP server address pool "parameters, must be ruled out the static IP address occupied by these addresses. In order to more intuitive solution to wireless IP conflict, here is the case of the wireless network, using the static IP address of the computer use "192.168.1.10~192.168.1.14" in the IP address, so in setting the address pool parameters must exclude this IP address, to prevent conflict, such as the address pool "" parameter is set to "192.168.1.15~192.168.1.60", so as to meet the needs of 45 dynamic IP address of the client, but also to prevent the IP address conflict. To solve these conflicts in wireless IP tips, when to use the computer will not always IP conflict makes you unable to connect or disconnect the computer and a headache! More importantly, helps you to enjoy free Internet for you whenever and wherever possible rub card!