首页 斜齿轮教程

斜齿轮教程

举报
开通vip

斜齿轮教程 Untitled Document 第一步 新建一个文件 File > New... > 出现新建文件对话框 > 输入新文件名:gear > OK 第二步 建立第一条曲线 > Sketch | Done > 选择绘图平面:FRONT > OK > Top > 选择参考平面:TOP > 绘制如图剖面 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 1/37 页)2005-12-10 22:04:40 Untit...

斜齿轮教程
Untitled Document 第一步 新建一个文件 File > New... > 出现新建文件对话框 > 输入新文件名:gear > OK 第二步 建立第一条曲线 > Sketch | Done > 选择绘图平面:FRONT > OK > Top > 选择参考平面:TOP > 绘制如图剖面 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 1/37 页)2005-12-10 22:04:40 Untitled Document > > OK > 完成第一条曲线的绘制 第三步 修改曲线的名称 Set Up > Name > Feature > 在模型树选择曲线 > 输入新的名称:PITCH_DIAMETER > Done > 回到PART菜单 第四步 修改尺寸的名称 Modify > 在模型树选择曲线 > 在零件窗口出现尺寸,如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 2/37 页)2005-12-10 22:04:40 Untitled Document > DimCosmetics > Symbol > 选择尺寸,如图 > 输入新的名称:PCD > Done > Done > 回到PART菜单 第五步 建立两个参数 Set up > Parameters > Part > Create > Real Number http://proe.diy.myrice.com/share/online/sgearimg.htm(第 3/37 页)2005-12-10 22:04:40 Untitled Document > 输入第一个参数名称:m > 直接回车(由于这个参数的值是由方程控制的,所以这里不用输入数值) > Real Number > 输入第二个参数名称:no_of_teeth > 输入数值:25 > Done/Return > Done > 回到PART菜单 第六步 输入方程式 Relations > Add > 输入方程式:m=PCD/no_of_teeth > 回车 > 再一次回车以结束方程式的输入 > Done > 回到PART菜单 第七步 绘制第二条曲线 > Sketch | Done > Use Prev http://proe.diy.myrice.com/share/online/sgearimg.htm(第 4/37 页)2005-12-10 22:04:40 Untitled Document > Okay > 绘制如图剖面 > > OK > 完成第二条曲线的绘制 第八步 修改第二条曲线的名称 Set Up > Name > Feature > 在模型树选择第二条曲线 > 输入新的名称:ADDENDUM_DIAMETER > Done > 回到PART菜单 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 5/37 页)2005-12-10 22:04:40 Untitled Document 第九步 修改第二条曲线尺寸的名称 Modify > 在模型树选择第二条曲线 > 在零件窗口出现曲线的尺寸 > DimCosmetics > Symbol > 选择第二条曲线的尺寸 > 输入新尺寸名称:ADD_DIAMETER > Done > Done > 回到PART菜单 第十步 输入第二条方程式 Relations > 选择第二条曲线 > 这时零件窗口显示零件尺寸的名称,如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 6/37 页)2005-12-10 22:04:40 Untitled Document > Add > 输入方程式:ADD_DIAMETER=PCD+2*m > 回车 > 再一次回车以结束方程式的输入 > Done > 回到PART菜单 第十一步 绘制第三条曲线 > Sketch | Done > Use Prev > Okay > 绘制如图剖面 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 7/37 页)2005-12-10 22:04:40 Untitled Document > > OK > 完成第三条曲线的绘制 第十二步 修改第三条曲线的名称 Set Up > Name > Feature > 在模型树选择第三条曲线 > 输入新的名称:DEDDENDUM_DIAMETER > Done > 回到PART菜单 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 8/37 页)2005-12-10 22:04:40 Untitled Document 第十三步 修改第三条曲线尺寸的名称 Modify > 在模型树选择第三条曲线 > 在零件窗口出现曲线的尺寸,如图 > DimCosmetics > Symbol > 如图所示尺寸 > 输入新尺寸名称:DED_DIAMETER > Done > Done > 回到PART菜单 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 9/37 页)2005-12-10 22:04:40 Untitled Document 第十四步 输入第三条方程式 Relations > 选择第三条曲线 > 这时零件窗口显示零件尺寸的名称,如图 > Add > 输入方程式:DED_DIAMETER=PCD-2*(m+(3.1415*m/20)) > 回车 > 再一次回车以结束方程式的输入 > Done > 回到PART菜单 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 10/37 页)2005-12-10 22:04:40 Untitled Document 第十五步 绘制第四条曲线 > Sketch | Done > Use Prev > Okay > 绘制如图剖面 > > OK > 完成第四条曲线的绘制 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 11/37 页)2005-12-10 22:04:40 Untitled Document 第十六步 修改第四条曲线的名称 Set Up > Name > Feature > 在模型树选择第四条曲线 > 输入新的名称:BASE_DIAMETER > Done > 回到PART菜单 第十七步 修改第四条曲线尺寸的名称 Modify > 在模型树选择第四条曲线 > 在零件窗口出现曲线的尺寸,如图 > DimCosmetics > Symbol > 如图所示尺寸 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 12/37 页)2005-12-10 22:04:41 Untitled Document > 输入新尺寸名称:BASE_DIAMETER > Done > Done > 回到PART菜单 第十八步 建立一个参数 Set up > Parameters > Part > Create > Real Number > 输入参数名称:pressure_angle > 输入数值:20 > Done/Return http://proe.diy.myrice.com/share/online/sgearimg.htm(第 13/37 页)2005-12-10 22:04:41 Untitled Document > Done > 回到PART菜单 第十九步 输入第四条方程式 Relations > 选择第四条曲线 > 这时零件窗口显示零件尺寸的名称,如图 > Add > 输入方程式:BASE_DIAMETER=PCD*cos(pressure_angle) > 回车 > 再一次回车以结束方程式的输入 > Done > 回到PART菜单 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 14/37 页)2005-12-10 22:04:41 Untitled Document 第二十步 建立第五条曲线 > Sketch | Done > Use Prev > Okay > 绘制如图剖面 > > OK > 完成第五条曲线的绘制 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 15/37 页)2005-12-10 22:04:41 Untitled Document 第二十一步 修改第五条曲线的名称 Set Up > Name > Feature > 在模型树选择第五条曲线 > 输入新的名称:TOOTH > Done > 回到PART菜单 第二十二步 修改第五条曲线尺寸的名称 Modify > 在模型树选择第五条曲线 > 在零件窗口出现曲线的尺寸 > DimCosmetics > Symbol > 分别将对应的尺寸改成如图所示的名称 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 16/37 页)2005-12-10 22:04:41 Untitled Document > Done > Done > 回到PART菜单 第二十三步 建立方程式 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 17/37 页)2005-12-10 22:04:41 Untitled Document Relations > 选择第五条曲线 > 这时零件窗口显示零件尺寸的名称,如图 > Add > 输入方程式:TOOTH_RAD=PCD/8 > 回车 > HALF_TOOTH_TK=3.1415*m/4 > 回车 > TIP_RAD=3.1415*m/8 > 回车 > 再一次回车以结束方程式的输入 > Done > 回到PART菜单 第二十四步 建立两个参数 Set up > Parameters > Part > Create > Real Number http://proe.diy.myrice.com/share/online/sgearimg.htm(第 18/37 页)2005-12-10 22:04:41 Untitled Document > 输入参数名称:helix_angle > 输入数值:15 > Real Number > 输入参数名称:face_width > 输入数值:100 > Done/Return > Done > 回到PART菜单 第二十五步 复制曲线 Feature > Copy > Move | Select | Independent | Done > 选择TOOTH曲线 > Done > Translate > Plane > 选择FRONT平面 > Flip | Okay http://proe.diy.myrice.com/share/online/sgearimg.htm(第 19/37 页)2005-12-10 22:04:41 Untitled Document > 输入数值:face_width*cos(helix_angle)/3 (注:这里可以用方程式代替,这里为了简便,就不写出来了,但我已给出完整的公式, 你只需将公式代出相应的尺寸名称就可以了。例如,这里的尺寸名称是d21, 那么,在完成该步骤后,加入公式d21=face_width*cos(helix_angle)/3就可以了, 后面有多处也是如此) > Rotate > Csys > 选择坐标系统PRT_CSYS_DEF > Z axis > Flip | Okay > 输入数值:helix_angle/3 > Done Move > Done > OK > Done > 回到PART菜单 > View > Default > 转为3D视图 > 完成后如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 20/37 页)2005-12-10 22:04:41 Untitled Document 注:正如你见到的,你就可以直接输入公式, 第二十六步 复制曲线 Feature > Copy > Move | Select | Independent | Done > 选择第二十五步建立的曲线 > Done > Translate > Plane > 选择FRONT平面 > Flip | Okay > 输入数值:face_width*cos(helix_angle)/3 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 21/37 页)2005-12-10 22:04:41 Untitled Document > Rotate > Csys > 选择坐标系统PRT_CSYS_DEF > Z axis > Flip | Okay > 输入数值:helix_angle/3 > Done Move > Done > OK > Done > 回到PART菜单 > 完成后如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 22/37 页)2005-12-10 22:04:41 Untitled Document 第二十七步 复制曲线 Feature > Copy > Move | Select | Independent | Done > 选择上步建立的曲线 > Done > Translate > Plane > 选择FRONT平面 > Flip | Okay > 输入数值:face_width*cos(helix_angle)/3 > Rotate > Csys > 选择坐标系统PRT_CSYS_DEF > Z axis > Flip | Okay > 输入数值:helix_angle/3 > Done Move > Done > OK http://proe.diy.myrice.com/share/online/sgearimg.htm(第 23/37 页)2005-12-10 22:04:41 Untitled Document > Done > 回到PART菜单 > 完成后如图 第二十八步 建立一条曲线 > Sketch | Done > 选择绘图平面:TOP > OK > Bottom > 选择参考平面:FRONT http://proe.diy.myrice.com/share/online/sgearimg.htm(第 24/37 页)2005-12-10 22:04:41 Untitled Document > 绘制如图剖面 > > OK > 完成曲线的绘制 > View > Default > 转为3D视图 第二十九步 建立Swept Blend特征 Feature > Create > Solid > Protrusion > Advanced | Solid | Done > Swept Blend | Done http://proe.diy.myrice.com/share/online/sgearimg.htm(第 25/37 页)2005-12-10 22:04:41 Untitled Document > Select Sec | NrmToOriginTraj | Done > Select Traj > One By One | Select > 选择曲线 > Done > Pick Curve | Sel Loop > 选择如图所示曲线位置 > Done http://proe.diy.myrice.com/share/online/sgearimg.htm(第 26/37 页)2005-12-10 22:04:41 Untitled Document > Pick Curve | Sel Loop > 选择如图所示曲线位置 > Done http://proe.diy.myrice.com/share/online/sgearimg.htm(第 27/37 页)2005-12-10 22:04:41 Untitled Document > 提示栏出现:Continue to next section? (Y/N): > 输入:Y > Pick Curve | Sel Loop > 选择如图所示曲线位置 > Done http://proe.diy.myrice.com/share/online/sgearimg.htm(第 28/37 页)2005-12-10 22:04:41 Untitled Document > 提示栏出现:Continue to next section? (Y/N): > 输入:Y > Pick Curve | Sel Loop > 选择如图所示曲线位置 > Done http://proe.diy.myrice.com/share/online/sgearimg.htm(第 29/37 页)2005-12-10 22:04:41 Untitled Document > 提示栏出现:Continue to next section? (Y/N): > 输入:N > 在对话框中单击OK > 完成Swept Blend特征,如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 30/37 页)2005-12-10 22:04:41 Untitled Document 第三十步 复制实体 Copy > Move | Select | Independent | Done > 选择Swept Blend实体 > Done > Rotate > Csys > 选择坐标系PRT_CSYS_DEF > Z axis > Okay > 输入旋转角度:360/no_of_teeth > Done Move http://proe.diy.myrice.com/share/online/sgearimg.htm(第 31/37 页)2005-12-10 22:04:41 Untitled Document > Done > OK > Done > 回到PART菜单 > 完成实体的复制,如图 第三十一步 镜像齿轮 Pattern > 选择复制出来的实体 > Done > General | Done > 选择如图尺寸 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 32/37 页)2005-12-10 22:04:41 Untitled Document > 输入旋转角度:360/no_of_teeth > Done > 输入镜像个数:24 注:这里使用方程式时为:no_of_teeth-1,但现在这里不能直接使用公式 > Done > 完成后如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 33/37 页)2005-12-10 22:04:41 Untitled Document 第三十一步 建立实体 Create > Solid > Protrusion > Extrude | Solid | Done > One Side | Done > 选择绘图平面:FRONT > Flip | Okay > Top > 选择参考平面:TOP > 绘制如图平面 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 34/37 页)2005-12-10 22:04:41 Untitled Document > > UpTo Surface | Done > 选择如图的面为终止面 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 35/37 页)2005-12-10 22:04:41 Untitled Document > OK 第三十二步 隐藏曲线,如图 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 36/37 页)2005-12-10 22:04:41 Untitled Document 齿轮内部特征比较简单,可以自己制作完成。   返回 http://proe.diy.myrice.com/share/online/sgearimg.htm(第 37/37 页)2005-12-10 22:04:41 myrice.com Untitled Document
本文档为【斜齿轮教程】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑, 图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
下载需要: 免费 已有0 人下载
最新资料
资料动态
专题动态
is_211085
暂无简介~
格式:pdf
大小:256KB
软件:PDF阅读器
页数:37
分类:
上传时间:2009-01-23
浏览量:57