word字体段落设置教学方案

word字体段落设置教学 方案 气瓶 现场处置方案 .pdf气瓶 现场处置方案 .doc见习基地管理方案.doc关于群访事件的化解方案建筑工地扬尘治理专项方案下载 信息技术课堂教学设计表 章节名称 Word基本操作---字体、段落的设置 学科 信息技术 授课对象 高一学生 授课时间 2014-4-14 设计者 **** 所属班级 ***** 依据 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 课程标准:只填写与本节(课)有关的课程标准内容 1、了解Word软件的操作界面，掌握菜单命令的选择。 2、了解Word中字体的概念，掌握字体设置 方法 快递客服问题件处理详细方法山木方法pdf计算方法pdf华与华方法下载八字理论方法下载 。 3、了解Word中段落的概念，掌握段落设置方法。 4、尝试在Word文档中插入艺术字和图片。 本节(课)教学内容分析 本节(课)教学内容概述， 知识点 高中化学知识点免费下载体育概论知识点下载名人传知识点免费下载线性代数知识点汇总下载高中化学知识点免费下载 的划分以及各知识点之间的逻辑关系。 本节内容是高中信息技术操作课中比较重要的内容，在后面课程的学习中起基础作用。本节内容在整个课程中都是重点内容，学生学好本节，对学生日后的学习、生活和工作都有着重要的影响。 本节(课)教学目标 知识和技能: 掌握字体和段落的设置方法，能够熟练完成操作任务。 过程和方法: 能在日常生活中，根据需要，熟练使用Microsoft word软件。 情感态度和价值观: 养成主动学习的习惯。 学习者特征分析 重点填写学生在学习本节(课)时有影响的心理状态、知识结构特点和学习准备情况，作为解决教学重点、难点，选择教学策略，设计课堂教学过程的依据。如果设计的教学活动是在信息化环境下进行的，还需要分析学生现在所具备的信息素养状况，以利于教学活动的顺利开展。 多数学生初中已初步学习了word文档的编辑、修饰等基本操作。多数学生能对word文档进行简单的字体和段落设置。但有时候操作具有随意性，完成标准不明确或者对于练习的具体操作要求不明确;即不能进行精细化的设置。 知识点学习目标描述 知识点 学习目 具 体 描 述 语 句 编 号 标层次 掌握 Word中字体和段落的设置方法，菜单命令的选择。 1 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 了解 Word软件的界面以及字体和段落的概念。 2 尝试 在word中插入艺术字和图片。 3 教学重点和难点 项 目 内 容 解 决 措 施 教学重点 字体和段落的设置 课堂演示，并让学生上机操作 对 题 快递公司问题件快递公司问题件货款处理关于圆的周长面积重点题型关于解方程组的题及答案关于南海问题 目要求的准确理解并选 教学难点 择适当的操作步骤，检验自出题，让学生多做练习 己操作是否正确。 课前对学生的要求 包括需要预习的内容，考虑的问题，调查、研究、收集的资料等。 教学媒体(资源)选择 知识点 学习目 媒体 教学 使用 占用 媒体 媒体内容要点 所 得 结 论 编 号 标层次 类型 作用 方式 时间 来源 ?媒体在教学中的作用分为:A.提供事实，建立经验;B.创设情境，引发动机;C.举例验证，建立概念;D.提供示范，正确操作;E.呈现过程，形成表象;F.演绎原理，启发思维;G.设难置疑，引起思辨;H.展示事例，开阔视野;I.欣赏审美，陶冶情操;J.归纳总结，复习巩固;K.自定义。 ?媒体的使用方式包括:A.设疑—播放—讲解;B.设疑—播放—讨论;C.讲解—播放—概括;D.讲解—播放—举例;E.播放—提问—讲解;F.播放—讨论—总结;G.边播放、边讲解;H. 边播放、边议论;I.学习者自己操作媒体进行学习;J.自定义。 板书设计 字体:选定文字?格式?段落:选定段落?格式?Word 字体?设置字体格式?段落?设置段落格式? 确定 确定 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 关于教学策略选择的阐述和教学环境设计 填写关于教学组织策略、教学传递策略(教学模式、教学方法、教学组织形式等)和教学管理策略的选择过程。 ?普通教室 ?实验室 ?多媒体教室 ?网络教室 ?其他:(填写具体要求) 课堂教学过程结构设计 教学 媒体使用及设计意教学内容 教师活动 学生活动 环节 图、依据 图文并茂的文学作教师边演示边进行讲解 用Word编写出的各种品更能激发学生的导入 欣赏教师用ppt演并注意引导学生进行观诗歌、日记、短文等作学习兴趣，为认识新课 示的作品 察、欣赏所展示的各种文品。 Word教学埔平道 学素材。 路。 教师边演示边进行讲让学生课上练习有 解:同学们～Word字处理明确操作要求的题 软件不仅可以让我们快捷目，将学习和做题结 方便地输入和编写文字，合起来，避免会操作 而且可以让我们在文档中而不能按指定要求 随意的进行各种设置和添正确操作的情况出通过学习让学生加。 现。 顺利地启动老师小结:Word具有 “Word”窗口的1、word字处理软件功对文章进行编辑、修改、 学习 方法，并对其窗能 设置、插入、排版、打印 新知 口进行初步的认 等功能。 识。 今天我们学习Word的主 要目的是让大家初步了解 Word的字处理功能，对 Word窗口有了初步的认 识，让大家能够归纳出 Word的主要功能点，培养 大家对事物的观察能力和 归纳能力。 3 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 1(将济南的冬天.doc文档这个课的主要目的课上练习 中的所有文字，字体设为是:通过简单的练要求:学生不要记黑体，小四号字。 习，让学生回忆起曾忆老师演示的操作2(文档中的所有段落设为2、演示教学word1练经学习过的word文步骤，需要掌握关习 首行缩进2个汉字，行间档基础知识和基本键性的步骤，通过距:固定值，20磅。 操作。完成知识的延自己对题目的分 3(在文档上方插入艺术字伸和操作技能的巩析，选择适当操作。 库中第一行第一列式样的固。 难点的讲解: 艺术字，内容为“荷塘月没有全新或者生僻1-1 字体的设置:包色”。 的内容，学生学习比括字体、字号、文字较轻松，为深入的学颜色的设置。 习做铺垫。 操作步骤: 选中文字?字体? 打开荷塘月色.doc，进行如设置字体、字号、颜下操作: 色等?确定 1.标题设为黑体，三号 字，居中，红色 1-2段落的设置:包 2.正文设为宋体四号括特殊格式(首行缩3、演示教学word2练字，行间距固定值20磅 习 进2个汉字)、行间 3.插入图片htys.jpg，环 距(行距:20磅)绕方式:四周形，只在左居中(对齐方式:居侧;水平对齐，绝对位置中)的设置。 距页边距11.75厘米;垂 直对齐，绝对位置距页边 距4.95厘米 1、 打开无题.doc，将 标题设置为艺术 字，任意样式，并 居中对齐。 询问学生，按学生回答执学生针对练习进行加强学生对课堂内2、 将作者设为黑体，行操作，最后判断正确性。 操作，有老师给出评容的记忆，使学生熟巩固 小四号字。并居中或者让学生自己直接操价后，有错的改正，练操作。 练习 对齐。 作，再判断正确定。 无错的加强记忆。 3、 将诗句的字体设置 为隶书，四号字， 居中。 评价 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 修正 促进 迁移 教学流程图 开始 导入新课 欣赏作品 课件 讲解word文字的思考记录 课件 字体和段落设置 演示操作方法 思考记忆 课件 巩固练习 课件 学生操作 教师判断、评 价 教师总结 结 结束 教师进行 媒体的 学生的 教学内容和 逻辑判断 应 用 活 动 教师的活动 第 2 页 5 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 个性化教学 为学有余力的学生所做的调整: 为需要帮助的学生所做的调整: 形成性检测 知识点 学习目 检 测 题 的 内 容 编 号 标层次 评价量表 需要时，可在此处加入评价量表;不需要时，将该栏删除。 形成性评价 本栏在每节课后必须及时填写。 教学反思、总结 课程结束后对所设计的教学进行反思。 感谢、其他 填写对帮助过自己的人(包括参阅的文献、借鉴的案例，以及在教学设计和教学实践中帮助过自己) 表示的感谢和其它要说明的事项。 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test