蚊子腿腿也是肉：初级信用卡使用攻略

蚊子腿腿也是肉：初级信用卡使用攻略 蚊子腿腿也是肉:初级信用卡使用攻略 导读: 一、说在前面 二、信用卡积分兑换集分宝 三、浅谈交行沃尔玛卡 四、刷卡活动小经验 五、寻找优惠活动的APP 六、其他卡种小诀窍 七、结束语 一、说在前面: 我也来插一脚抢蓝大大的信用卡经验生意了～ 我不是业内专内人士，卡种也不多，只不过金牛座本性使然，不能放过占银行小便宜，久而久之也就有了一点点小经验。大部分都是蚊子肉，我们穷人的时间换不来钱，最多用来省省钱，土豪和信用卡高手们看到这里就可以点右上角叉叉了。 看我其他经验就知道我爱折腾，为了蝇头小利忙死也甘愿。我老公常数落我，为这几十几百的有意思吗，股票一个涨停不是什么都有了吗。他不理解的是——这两者根本不冲突～股票涨停我也要，蝇头小利我也要～ 银行的规则不停的在变，有的我也了解的不深，我只讲讲我自己的信用卡配置和使用方法，有小错误请多包涵。如果对你们有小帮助我就很开心了，如无帮助也请不要喷我，作为一界屌丝，想着怎么省钱占便宜是我的爱好，这就好比玩数码、拼乐高、爱美容是你的爱好，这两者没什么区别。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 二、信用卡积分兑换集分宝 1、选择一张网上消费有积分的信用卡开通快捷支付 对于常在淘宝或网上购物的人来说，网上消费如果不能积分就太浪费了。首先你要开通快捷支付方式，比如支付宝的或财付通的，这样大部分信用卡就能积分了(具体是否有积分要看银行，如交行网购就无积分)。嫌快捷方式不安全的，把所有支付宝的安全 措施 《全国民用建筑工程设计技术措施》规划•建筑•景观全国民用建筑工程设计技术措施》规划•建筑•景观软件质量保证措施下载工地伤害及预防措施下载关于贯彻落实的具体措施 全开通不就安全了吗, 我自己是开通了前六个。 如有两个手机、并常使用无线支付的同学，也可以尝试把短信校验服务开通在另一个未开通支付宝、或不常用的手机号上，以此提高安全级别。 我现在的网购都是用上海农商银行的淘宝鑫卡(介绍页面)。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 和其他网上消费有积分信用卡类似，无论哪个网站消费，只要是经过支付宝快捷方式付款，全部有积分。该卡常有返三倍的标签(是指10元返3个集分宝，虽然听上去像是蚊子腿腿肉，但换算一下比双倍积分还要高哦)。 2、信用卡积分兑换集分宝抵现 每个银行的积分兑换集分的比例不同，从500积分兑换100集分宝到1000积分兑换100集分宝不等。100个集分宝等于一元，对于看不上信用卡积分兑换的礼品的同学这是个不错的选择。 银行积分快捷支付支持的银行和集分宝兑换比例: ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 可以积分抵现的信用卡开通快捷方式后，在支付宝收银台支付时会有“我要抵现”字样，平显示能抵现多少钱，点击进入设置即可。 现在仅有上海、江苏、湖南能申请上海农商银行的淘宝鑫卡，所以对于其他地区的用户，中信I白金卡、中信QQ卡、广发淘宝卡等也是不错的选择。中信卡网购双倍积分;广发淘宝卡是2013年新出的，活动暂时还比较多，每月网上消费300元，次月8日抽奖得集分宝(抽奖地址)，但不要将广发淘宝卡作为线上主力卡，因为杯具的是广发卡除了搞活动期间，其他时间网购是无积分的。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 三、浅谈交行沃尔玛卡 线下消费，主力卡当然是交行沃尔玛神卡。 真是居家旅行、行走江湖必备神卡，无脑刷卡便是…… 如果家附近有家沃尔玛、山姆、好又多超市，就一定一定要办一张交行沃尔玛联名卡(甚至我认为就算一年只能去一次沃尔玛，也应该办一张)。 店内人民币消费每1元累积2分，店外人民币消费每1元累积1分，外币消费每1美元累积7分。 这张卡最大的好处是，积分可用于折抵沃尔玛的店内消费。而且积分抵现兑换率惊人，见下图: ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 仔细研究一下，要知道一般银行的积分换礼品，是以400-600积分抵礼品售价的1元，以500积分抵一元为例，兑换率是0.2%，更何况所谓的礼品售价有水份。而沃尔玛卡的积分兑换率最高能达到1%，不仅相当于普通卡的五倍积分，而且超市售价水份小，还能任选商品。 由于交行规则是首个2999分不兑换，3000-10000分的兑换也会打折，所以最好是集齐大量积分一次性兑换(每年兑换上限是20万积分)。不要担心在超市里一次性买不了上千元的商品，你可以购买沃尔玛购物卡呀～(请叫我红领巾…… ) 交行卡的活动也非常多，每年四月份有指定超市消费返刷卡金活动;常年最红星期五活动，即周五在指定超市或加油站加油，满128元即返5%(需上月消费一定金额);还有推荐新人返刷卡金、周周刷等，类似这样的活动不少。 看一下交行信用卡近期的主要活动项目,还是很丰富的。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 四、刷卡活动小经验 当当当～重头戏来了～ 银行常有刷卡礼，有些银行甚至是定期会有这方面的活动(如招行、交行)。在活动期间一定要主力此卡、合理安排、无孔不入、没事找刷～ 当然请计算好付出与收获比，不要做出为了得1000元的礼品而刷了2000元无谓的商品这种蠢事。 如果有渠道或熟人POS机可刷，可以跳过这一节。 这些活动信息可以从网站、银行微信等途径获取。 关于刷卡活动我的心得是: ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 1、先关注活动中是否有自己心仪的礼品，不要盲目下手。 2、根据活动规定，研究一下自己能获得礼品的可行性。 3、计算一下为这件礼品付出的时间、金钱成本是否划算。 4、 规划 污水管网监理规划下载职业规划大学生职业规划个人职业规划职业规划论文 一下活动期间可能的消费(刷卡活动无非两种消费模式:多次小金额刷卡或少次大金额刷卡)。 5、对于需频繁刷卡的活动(如交行周周刷活动，需每周五笔，连续数周)，最好做一下笔记哦。 刷卡小诀窍: 1、遇到要求多次小金额刷卡的活动，请把一笔大支出尽可能地分多次刷。如充值美容卡、理发卡，这种店家是很好说话的，分几周数次充值都没问题。 2、安排近期的大笔支出延后或提前消费，尽可能放在活动期间。 3、还差少许几笔不大的金额就能达标时，如活动信用卡是线上有积分的，请果断地充话费、充天猫点券、充一号店购物卡等等自己日后总归用得到的购物卡;如活动信用卡只有线下有积分的，请果断地去超市充值购物卡、购买京东实体卡线下刷POS机支付等等仍然是自己日后总归用得到的购物卡。 如果没有途径去消费活动要求的金额，没有可能完成，干脆一开始就不要参加活动，切勿为礼品而乱刷卡。比如最近的交行周周刷活动，要求每周五笔168元消费，且必须五笔均为不同商家，心仪的商品需要七周，屌丝如我根本没可能完成，所以就不参加啦。 下面到了炫耀时间～ 以下是楼主近七八年参加银行活动得到的礼品(不包括积分兑换的礼品哦)。大家都知道楼主喜欢下厨，所以大部分是楼主喜欢厨房用品。 香山体脂称(浦发银行) ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 象印火锅烧烤两用锅(交通银行) ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 伊莱克斯电饭煲(浦发银行) ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 德世朗不锈钢煎锅汤锅二件套(上海银行) ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain WMF不锈钢汤锅三件套(招商银行) 双立人红点系列不锈钢刀具三件套(上海银行) 飞利浦手持料理棒(交通银行) ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 不要喷我，这些是七八年的累计，平均也就一年一件。银行活动那么多，楼主屌丝一枚也不是个个都参加得起的。比如招行年年都有活动，这么多年楼主也就只得了一件。 这里重点说一下招行的活动。招行的活动门槛比较高，不仅是说刷卡金额到了就有礼品，而是刷够了数只是有资格而己，还要秒杀才能得到礼品。像今年的WMF不锈钢汤锅三件套，可能是价值比较高的缘故，每期放出1500-2000套锅，却有两万人在抢，真是腥风血雨。当然你们身边如果有一个像我这样的秒杀小能手的朋友，就高枕无忧啦(臭屁 )～我今年帮我自己和亲戚朋友同事，一共抢了五套WMF锅～说秒杀毫不过份，真的是到了点儿秒无，我抢时要备一个IPHONE手机一个安卓手机，看哪个系统的招行APP倒计时不延迟就点哪个，帮别人抢比自己抢还紧张。 不过这都不算什么，岔开话题讲讲7月的一次秒杀。魔都人都知道魔都的车牌现在是什么情况，每月13万人抢七八千张牌照，而且改革后中标价是有区间的，并不是价高者得。就因为难拍，二手牌已11万，黄牛代拍价已涨至一万，而且也不保证能拍到。我加了个拍牌群，里面十个月都没拍上的人都有，有的拍了半年实在等不了上外牌了，还有人发动亲戚，五个标书一起拍，哪张标书中了车就上哪个名字。我怀着玩玩的心情打算拍半年试试看，拍ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 不中也不要紧(反正我现在有车，开了五年，外牌，拍中了随时换车)，第二次居然就中了～当然策略占一部分，更多的是运气成份。 去年的天猫魔盒我也秒到了好几个，我同事要的手机我也帮她秒到。当然前提是数量不是那么少的商品，毕竟我是全手动，不比高手们有软件。 回到正题，除了刷卡活动，银行还有开卡送礼品及推荐新用户送礼品活动。开卡礼品比较小就不说了。交行推荐新用户一直有很大力度的活动，去年是直接送刷卡金(能抵任何消费)，ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 今年1-3月是推荐三人得HP7寸平板，4-6月推荐三人得伊莱克斯空气净化器，7月起推荐六人得2000元刷卡金。 楼主交际面不广，而且身边朋友几乎都有交行信用卡，好不容易今年年初凑了三个新用户，得了一块HP平板电脑。但人有失足，马有失蹄，4-6月的活动推荐成功了两人，最后差了一人，无法得到净化器，伤心地几乎要跳楼…… 最近花旗银行和上海银行也有开卡礼，可以关注一下。 五、寻找优惠活动的APP 如果你手上有好几张不同银行的信用卡，可以下载一个有关信用卡优惠集合的手机APP。这类APP使用的机率并不高，只是有用时才看看。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 1、比如“卡惠”。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 基本上两三周看一下“找活动”，可以筛选你要的分类和你信用卡的银行，标题特别诱人的关 注一下。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 或者是到某一处Shopping mall逛街时，想喝下午茶、或吃晚餐时抱着“没有目的，随便哪 里都可以”的心情，那么找一下附近优惠有没有心仪的。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 2、“银联钱包”活动非常丰富，好的活动需要抢。大型活动时还是很给力的，比如某面包房 掼奶油1元一杯，酷圣石中杯1元一杯，沃尔玛300-88什么的。平常撸撸10元DQ啊，6 2折满记甜品什么的也很轻松，缺点是优惠券有效期很短，但活动一直很多。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 六、其他卡种小诀窍 1、大部分银行的普卡和金卡都是每年刷三次或六次免年费，但有些特殊卡种，是终生免年费的，那就可以办一张放着，有活动才用，没活动就扔着，反正没年费。比如浦发的麦兜卡、上海银行的标准卡、星运卡。事实上这两个银行线上线下活动也不少，但积分就没别的卡翻多倍那么厉害。建设银行、北京银行、邮政储蓄、农业银行也都有终生免年费信用卡，可以选择办理。 2、对于一年要坐多次飞机的人，最好办一张中信i白金卡，这张卡的好处大神蓝翼已经宣传过无数次了。我简要重复一下，这是一张低门槛的白金卡，每年刷满12次免年费。用它在指定商户购机票，能提供1500W的航空意外险;飞机延误2小时以上赔偿1000元;消费满一定金额一年赠送二至四次机场贵宾厅服务;线上线下均双倍积分;而且常年都有9积分兑换礼品的活动。 3、我认为广发卡一定要办一张，线上线下活动非常多，力度也不错。比如2013年，广发有小半年都在搞每周指定一天淘宝天猫购物288-144活动，超级实惠～虽然要抢……;今年上半年也有天猫电器城200-100的活动;每周五都有线下知名餐饮店都有买一送一活动;境外消费也常有多倍积分活动;有些卡种(比如真情卡)在开卡时指定消费类型(如百货、餐饮等)，该类消费终生可获3倍积分。 4、平安卡活动也非常多，最近每周三有淘宝天猫消费100元以下打三折活动(需要抢)，不限品类(活动页面)。近几年平安和电商合作了很多满减活动，比如淘宝、天猫、大众点评、唯品会等等，几乎每半年一次大型活动，不仅力度大，而且不小气，可以重复参加。需要做的就是支付宝绑定平安卡快捷方式，然后事先拍好商品，规定的整点前等候在支付宝收银页面，到了整点时F5，跳出优惠提示后马上输支付密码。一般来说，00分没支付成功的，04分再刷，还没成功，08分再刷(一般人我不告TA )，玩这种活动的时候记得关闭短信验证。另，平安境外活动也比较丰富。 5、喜欢海淘人士最好办张免货币转换费卡，这方面的选择非常多，详见蓝大大文章。 6、有车人士就应该办一张车主卡啦。大部分银行都有自己的车主卡，平安、招行、交行，基本都是有条件的加油返现(具体看银行细则)，我选择的是最不用动脑筋的广发车主卡，加油返5倍积分，但我正在考虑充油卡要不要直接刷交行沃尔玛卡，以换现金的比例来说似乎更划算。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 7、和自己的伴侣最好主力消费信用卡设置主卡和附属卡，其他的非主力卡两人申请不同银行不同功能的信用卡。 有人可能要问，这么多卡，管理起来麻烦吗,还款会忘记吗,事实上我的主力卡就两张，农商的淘宝鑫卡和交行的沃尔玛卡，其他卡不过是有活动才用。所以并没有太多麻烦。实觉得记不住的可以在支付宝APP里设置好还款提醒，或是下载一下类似卡牛的信用卡管理APP。 七、结束语 我这点儿卡真不算什么，初级而己，真正的信用卡高手是用大号名片夹和EXCEL来管理信用卡的。 无论如何请记住:信用卡主要功能是免息放贷50天左右，积分礼品只是顺带的礼物，消费多少还是要凭借自己的还款能力，切勿因为有了信用卡就超出自己能力消费，最终沦为卡奴，害人害己。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain