大规格齿形垫片，带外环型尺寸

Metric (mm) Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies A Flanges 齿形垫片，带外环型尺寸 NPS Class 150 Class 300 Class 400 Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter 26 673.1 704.9 774.7 685.8 736.6 835.2 685.8 28 723.9 755.7 831.9 736.6 787.4 898.7 736.6 30 774.7 806.5 882.7 793.8 844.6 952.5 793.8 32 825.5 860.6 939.8 850.9 901.7 1006.6 850.9 34 876.3 911.4 990.6 901.7 952.5 1057.4 901.7 36 927.1 968.5 1047.8 955.8 1006.6 1117.6 955.8 38 977.9 1019.3 1111.3 977.9 1016.0 1054.1 971.6 40 1028.7 1070.1 1162.1 1022.4 1070.1 1114.6 1025.7 42 1079.5 1124.0 1219.2 1073.2 1120.9 1165.4 1076.5 44 1130.3 1178.1 1276.4 1130.3 1181.1 1219.2 1130.3 46 1181.1 1228.9 1327.2 1178.1 1228.9 1273.3 1193.8 48 1231.9 1279.7 1384.3 1235.2 1286.0 1324.1 1244.6 50 1282.7 1333.5 1435.1 1295.4 1346.2 1378.0 1295.4 52 1333.5 1384.3 1492.3 1346.2 1397.0 1428.8 1346.2 54 1384.3 1435.1 1549.4 1403.4 1454.2 1492.3 1403.4 56 1435.1 1485.9 1606.6 1454.2 1505.0 1543.1 1454.2 58 1485.9 1536.7 1663.7 1511.3 1562.1 1593.9 1505.0 60 1536.7 1587.5 1714.5 1562.1 1612.9 1644.7 1568.5 GENERAL NOTES: (a) All dimensions are in millimeters. (b) For reference, see Table X illustration on previous page. (c) The core thickness tolerance is +/-0.08 mm, not including the facing. NOTES: (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.8 mm, and the tolerance for NPS 36 through NPS 60 is +/-1.5 mm. (2) The gasket outside diameter (d2) tolerance for NPS 26 through NPS 60 is +/-1.5 mm. (3) The centering ring outside diameter (d3) tolerance is +/-0.8 mm. (4) There are no Class 900 flanges NPS 50 and larger. Standard (in) Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies A Flanges NPS Class 150 Class 300 Class 400 Grooved Core Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter Grooved Core (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter 26 26.50 27.75 30.50 27.00 29.00 32.88 27.00 28 28.50 29.75 32.75 29.00 31.00 35.38 29.00 30 30.50 31.75 34.75 31.25 33.25 37.50 31.25 32 32.50 33.88 37.00 33.50 35.50 39.63 33.50 34 34.50 35.88 39.00 35.50 37.50 41.63 35.50 36 36.50 38.13 41.25 37.63 39.63 44.00 37.63 38 38.50 40.13 43.75 38.50 40.00 41.50 38.25 40 40.50 42.13 45.75 40.25 42.13 43.88 40.38 42 42.50 44.25 48.00 42.25 44.13 45.88 42.38 44 44.50 46.38 50.25 44.50 46.50 48.00 44.50 46 46.50 48.38 52.25 46.38 48.38 50.13 47.00 48 48.50 50.38 54.50 48.63 50.63 52.13 49.00 50 50.50 52.50 56.50 51.00 53.00 54.25 51.00 52 52.50 54.50 58.75 53.00 55.00 56.25 53.00 54 54.50 56.50 61.00 55.25 57.25 58.75 55.25 56 56.50 58.50 63.25 57.25 59.25 60.75 57.25 58 58.50 60.50 65.50 59.50 61.50 62.75 59.25 60 60.50 62.50 67.50 61.50 63.50 64.75 61.75 GENERAL NOTES: (a) All dimensions are in inches. (b) For reference, see Table X illustration on previous page. (c) The core thickness tolerance is +/-0.003 in, not including the facing. NOTES: (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.03 in, and the tolerance for NPS 36 through NPS 60 is +/-0.06 in. (2) The gasket outside diameter (d2) tolerance for NPS 26 through NPS 60 is +/-0.06 in. (3) The centering ring outside diameter (d3) tolerance is +/-0.03 in. (4) There are no Class 900 flanges NPS 50 and larger. Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies A Flanges Class 400 Class 600 Class 900 Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 736.6 831.9 685.8 736.6 866.9 685.8 736.6 882.7 787.4 892.3 736.6 787.4 914.4 736.6 787.4 946.2 844.6 946.2 793.8 844.6 971.6 793.8 844.6 1009.7 901.7 1003.3 850.9 901.7 1022.4 850.9 901.7 1073.2 952.5 1054.1 901.7 952.5 1073.2 901.7 952.5 1136.7 1006.6 1117.6 955.8 1006.6 1130.3 958.9 1009.7 1200.2 1022.4 1073.2 990.6 1041.4 1104.9 1035.1 1085.9 1200.2 1076.5 1127.3 1047.8 1098.6 1155.7 1098.6 1149.4 1251.0 1127.3 1178.1 1104.9 1155.7 1219.2 1149.4 1200.2 1301.8 1181.1 1231.9 1162.1 1212.9 1270.0 1206.5 1257.3 1368.6 1244.6 1289.1 1212.9 1263.7 1327.2 1270.0 1320.8 1435.1 1295.4 1346.2 1270.0 1320.8 1390.7 1320.8 1371.6 1485.9 1346.2 1403.4 1320.8 1371.6 1447.8 1397.0 1454.2 1371.6 1422.4 1498.6 1454.2 1517.7 1428.8 1479.6 1555.8 1505.0 1568.5 1479.6 1530.4 1612.9 1555.8 1619.3 1536.7 1587.5 1663.7 1619.3 1682.8 1593.9 1644.7 1733.6 (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.8 mm, and the tolerance for NPS 36 through NPS 60 is +/-1.5 mm. Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies A Flanges Class 400 Class 600 Class 900 Grooved Core Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 29.00 32.75 27.00 29.00 34.13 27.00 29.00 34.75 31.00 35.13 29.00 31.00 36.00 29.00 31.00 37.25 33.25 37.25 31.25 33.25 38.25 31.25 33.25 39.75 35.50 39.50 33.50 35.50 40.25 33.50 35.50 42.25 37.50 41.50 35.50 37.50 42.25 35.50 37.50 44.75 39.63 44.00 37.63 39.63 44.50 37.75 39.75 47.25 40.25 42.25 39.00 41.00 43.50 40.75 42.75 47.25 42.38 44.38 41.25 43.25 45.50 43.25 45.25 49.25 44.38 46.38 43.50 45.50 48.00 45.25 47.25 51.25 46.50 48.50 45.75 47.75 50.00 47.50 49.50 53.88 49.00 50.75 47.75 49.75 52.25 50.00 52.00 56.50 51.00 53.00 50.00 52.00 54.75 52.00 54.00 58.50 53.00 55.25 52.00 54.00 57.00 55.00 57.25 54.00 56.00 59.00 57.25 59.75 56.25 58.25 61.25 59.25 61.75 58.25 60.25 63.50 61.25 63.75 60.50 62.50 65.50 63.75 66.25 62.75 64.75 68.25 (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.03 in, and the tolerance for NPS 36 through NPS 60 is +/-0.06 in. Metric (mm) Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies B Flanges NPS Class 150 Class 300 Class 400 Class 600 Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter Grooved Core (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 26 673.1 698.5 725.4 673.1 711.2 771.7 666.8 698.5 746.3 663.7 714.5 28 723.9 749.3 776.2 723.9 762.0 825.5 714.5 749.3 800.1 704.9 755.7 30 774.7 800.1 827.0 774.7 812.8 886.0 765.3 806.5 857.3 778.0 828.8 32 825.5 850.9 881.1 825.5 863.6 939.8 812.8 860.6 911.4 831.9 882.7 34 876.3 908.1 935.0 876.3 914.4 993.9 866.9 911.4 962.2 889.0 939.8 36 927.1 958.9 987.6 927.1 965.2 1047.8 917.7 965.2 1022.4 939.8 990.6 38 974.9 1009.7 1044.7 1009.7 1047.8 1098.6 971.6 1022.4 1073.2 990.6 1041.4 40 1022.4 1063.8 1095.5 1060.5 1098.6 1149.4 1025.7 1076.5 1127.3 1047.8 1098.6 42 1079.5 1114.6 1146.3 1111.3 1149.4 1200.2 1076.5 1127.3 1178.1 1104.9 1155.7 44 1124.0 1165.4 1197.1 1162.1 1200.2 1251.0 1130.3 1181.1 1231.9 1162.1 1212.9 46 1181.1 1224.0 1255.8 1216.2 1254.3 1317.8 1193.8 1244.6 1289.1 1212.9 1263.7 48 1231.9 1270.0 1306.6 1263.7 1311.4 1368.6 1244.6 1295.4 1346.2 1270.0 1320.8 50 1282.7 1325.6 1357.4 1317.8 1355.9 1419.4 1295.4 1346.2 1403.4 1320.8 1371.6 52 1333.5 1376.4 1408.2 1368.6 1406.7 1470.2 1346.2 1397.0 1454.2 1371.6 1422.4 54 1384.3 1422.4 1463.8 1403.4 1454.2 1530.4 1403.4 1454.2 1517.7 1428.8 1479.6 56 1444.8 1478.0 1514.6 1479.6 1524.0 1593.9 1454.2 1505.0 1568.5 1479.6 1530.4 58 1500.6 1528.8 1579.6 1535.2 1573.3 1655.8 1505.0 1555.8 1619.3 1536.7 1587.5 60 1557.3 1586.0 1630.4 1589.0 1630.4 1706.6 1568.5 1619.3 1682.8 1593.9 1644.7 GENERAL NOTES: (a) All dimensions are in millimeters. (b) For reference, see Table X illustration on previous page. (c) The core thickness tolerance is +/-0.08 mm, not including the facing. NOTES: (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.8 mm, and the tolerance for NPS 36 through NPS 60 is +/-1.5 mm. (2) The gasket outside diameter (d2) tolerance for NPS 26 through NPS 60 is +/-1.5 mm. (3) The centering ring outside diameter (d3) tolerance is +/-0.8 mm. (4) There are no Class 900 flanges NPS 50 and larger. Standard (in) Table X - Dimensions for Kammprofile Gaskets Used with ASME B16.47 Sereies B Flanges NPS Class 150 Class 300 Class 400 Class 600 Grooved Core Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter Grooved Core (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 26 26.50 27.50 28.56 26.50 28.00 30.38 26.25 27.50 29.38 26.13 28.13 28 28.50 29.50 30.56 28.50 30.00 32.50 28.13 29.50 31.50 27.75 29.75 30 30.50 31.50 32.56 30.50 32.00 34.88 30.13 31.75 33.75 30.63 32.63 32 32.50 33.50 34.69 32.50 34.00 37.00 32.00 33.88 35.88 32.75 34.75 34 34.50 35.75 36.81 34.50 36.00 39.13 34.13 35.88 37.88 35.00 37.00 36 36.50 37.75 38.88 36.50 38.00 41.25 36.13 38.00 40.25 37.00 39.00 38 38.38 39.75 41.13 39.75 41.25 43.25 38.25 40.25 42.25 39.00 41.00 40 40.25 41.88 43.13 41.75 43.25 45.25 40.38 42.38 44.38 41.25 43.25 42 42.50 43.88 45.13 43.75 45.25 47.25 42.38 44.38 46.38 43.50 45.50 44 44.25 45.88 47.13 45.75 47.25 49.25 44.50 46.50 48.50 45.75 47.75 46 46.50 48.19 49.44 47.88 49.38 51.88 47.00 49.00 50.75 47.75 49.75 48 48.50 50.00 51.44 49.75 51.63 53.88 49.00 51.00 53.00 50.00 52.00 50 50.50 52.19 53.44 51.88 53.38 55.88 51.00 53.00 55.25 52.00 54.00 52 52.50 54.19 55.44 53.88 55.38 57.88 53.00 55.00 57.25 54.00 56.00 54 54.50 56.00 57.63 55.25 57.25 60.25 55.25 57.25 59.75 56.25 58.25 56 56.88 58.19 59.63 58.25 60.00 62.75 57.25 59.25 61.75 58.25 60.25 58 59.08 60.19 62.19 60.44 61.94 65.19 59.25 61.25 63.75 60.50 62.50 60 61.31 62.44 64.19 62.56 64.19 67.19 61.75 63.75 66.25 62.75 64.75 GENERAL NOTES: (a) All dimensions are in inches. (b) For reference, see Table X illustration on previous page. (c) The core thickness tolerance is +/-0.003 in, not including the facing. NOTES: (1) The gasket inside diameter (d1) tolerance for NPS 26 through NPS 34 is +/-0.03 in, and the tolerance for NPS 36 through NPS 60 is +/-0.06 in. (2) The gasket outside diameter (d2) tolerance for NPS 26 through NPS 60 is +/-0.06 in. (3) The centering ring outside diameter (d3) tolerance is +/-0.03 in. (4) There are no Class 900 flanges NPS 50 and larger. Class 600 Class 900(D3) Centering Ring Outside Diameter Grooved Core (D3) Centering Ring Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 765.3 692.2 749.3 838.2 819.2 743.0 800.1 901.7 879.6 806.5 857.3 958.9 933.5 863.6 914.4 1016.0 997.0 920.8 971.6 1073.2 1047.8 946.2 997.0 1124.0 1104.9 1035.1 1085.9 1200.2 1155.7 1098.6 1149.4 1251.0 1219.2 1149.4 1200.2 1301.8 1270.0 1206.5 1257.3 1368.6 1327.2 1270.0 1320.8 1435.1 1390.7 1320.8 1371.6 1485.9 1447.8 1498.6 1555.8 1612.9 1663.7 1733.6 Class 600 Class 900 Centering Ring Outside Diameter Grooved Core Centering Ring Outside Diameter (D1) Inside Diameter (D2) Outside Diameter 30.13 27.25 29.50 33.00 32.25 29.25 31.50 35.50 34.63 31.75 33.75 37.75 36.75 34.00 36.00 40.00 39.25 36.25 38.25 42.25 41.25 37.25 39.25 44.25 43.50 40.75 42.75 47.25 45.50 43.25 45.25 49.25 48.00 45.25 47.25 51.25 50.00 47.50 49.50 53.88 52.25 50.00 52.00 56.50 54.75 52.00 54.00 58.50 57.00 59.00 61.25 63.50 65.50 68.25