Model 140 Inline Amplifier
Model 140 Revision D 05/23/2012
Low Noise Inline Amplifier
User Selectable Gain Settings
Small Rugged Package
Includes Auto-Zero Function
dimensions
The Model 140 is a remote in-line DC
amplifier designed to be used with bridge-
type mV output transducers. The amplifier
features five user selectable gain settings
with a gain accuracy of ±0.5% and offers a
wide bandwidth to 100kHz. The model 140
offers a unique auto-zero function (patent
pending) that allows the operator to zero the
transducer offset voltage to within ±1.5mV
either remotely or by pressing the on-board
push button at the user’s command, usually
right before the taking of data. This feature
removes any offset drift from the sensor for
a more accurate measurement.
FEATURES
• Interface with mV Output Sensors
• ±1.5mV Auto-Zero Function
• x10, x25, x50, x100 & x200 Gain Settings
• Wide Bandwidth to 100kHz
• 5 to 30Vdc Excitation Voltage
APPLICATIONS
• Pressure & Level Indication
• Static Acceleration Testing
• Instrumentation Labs
• Load Monitoring
• Strain Measurement
www.sensorway.cn
Model 140 Inline Amplifier
Model 140 Revision D 05/23/2012
performance specifications
All values are typical at ±24°C and 12Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these
specifications without notice.
Parameters
DYNAMIC
Input Type Differential
Input Range (V) 0.5 to (Vexc – 0.6), each input referenced to ground
User Selectable Gain Settings x10, x25, x50, x100, x200
Bandwidth (-3dB) DC to 100kHz
Noise (nV/√Hz) 17 RTI + 2000 RTO
Zero Output After Auto-Zero Actuation1 ±1.5mV, referenced to 2.5V reference out
Input Range Limit for Auto-Zero Function ±10Volts/gain
ELECTRICAL
Excitation Voltage (Vdc) 5 to 30
Reverse Polarity Protection -20V, on excitation line
Quiescent Current (mA) 15
Reference Out (Vdc) 2.5 ±0.05, referenced to ground
Output Voltage Limit (Vpk) ±2, referenced to 2.5V reference out
Gain Accuracy (%) 0.5
Output Impedance (Ω) <50
Insulation Resistance (MΩ) >100 @ 50Vdc
ENVIRONMENTAL
Operating Temperature (°C) -20 to +70
Storage Temperature (°C) -20 to +70
Environmental Protection IP50
Vibration (g) 20 pk from 50Hz to 2000Hz
Shock (g) 2000 pk with 3.6ms Haversine pulse
PHYSICAL
Case Material Anodized Aluminum
Electrical Connector, Input Binder Connector P/N 09-0098-00-05 (mates with Binder Connector P/N 99-0095-100-05)
Electrical Connector, Output Binder Connector P/N 09-0098-00-05 (mates with Binder Connector P/N 99-0095-100-05)
Weight (grams) 33
1 Auto-zero can be actuated using pushbutton or grounding remote auto-zero pin for minimum 2 sec. Multiple actuations may be required
to achieve the ±1.5mV limit.
2 Supply Out: 5.00 ±0.10 Vdc, <150 mamps current source, >5.2 Vdc excitation required.
3 Excitation and common ground are direct connections from instrumentation end to transducer end.
Optional accessories: 379-XXX Cable Assembly, 5x #30 AWG, (XXX designates length in inches, 10ft standard)
AC-G04239 Mating Connector Plug (Binder Connector P/N 99-0095-100-05)
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information
does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes
without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular
purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each
customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
www.sensorway.cn
Model 140 Inline Amplifier
Model 140 Revision D www.sensorway.cn 05/23/2012
schematic
ordering info
PART NUMBERING Model Number
Model 140
中国
北京赛斯维测控技术有限公司
北京市朝阳区望京西路48号
金隅国际C1002
电话:+86 010 8477 5646
传真:+86 010 5894 9029
邮箱:sales@sensorway.cn
本文档为【140信号放大器】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。