设置手机连接手提电脑无线上网

设置手机连接手提电脑无线上网 How to set up mobile phone connections, laptop computers, wireless internet access Ocean News, 2006, 09, 13: Liang Hongju, author of Guangzhou daily Host Liang Hongju Q: I heard that using mobile phones to connect laptops to the Internet, how to operate? Answer: two methods, one is data line connection, and the other is infrared connection. Data line connection Data line connection is more traditional, can be subdivided into COM connection line, USB connection line two kinds, as long as the notebook computer has COM port or USB port, and have the corresponding connection line. At present, only Motorola's mobile phone is Through the USB interface connection, most of the mobile phones are connected by the COM interface. The mobile phone that provides this interface basically provides the driver of GPRS, Modem, for, Win9X/2000/XP, and can refer to the official website of the corresponding handset manufacturer. Infrared connection Infrared connection is much more complicated, and using GPRS mobile phone + laptop, wireless Internet program is a bit like built-in Modem installation. We must first install infrared interface, driver, and virtual COM reflection to the infrared interface, of course it is not directly through the wired telephone number line dialing, but through mobile phone wireless dial, the specific configuration is as follows (using XP as an example): First install infrared interface driver, if the notebook computer BIOS configuration in configuration options for infrared interface, first need to enable infrared function, press the F2 key to enter the BIOS setup boot, chose to enter the System Devices menu and select the Infrares Port (infrared) option, this option has three optional, i.e. Disabled, Enabled and Auto, can be free to choose one of the two Enabled "and" Auto "option, press the F10 button to store the set value, the end of program. When you restart the system, the system will find new infrared ports, install the driver, and then pop up the Wizard dialog for adding new hardware, where you want to add a new modem. In the add new hardware wizard, click the next button, and then back up the prompt box in the add new hardware wizard. Select the last add new hardware device option in the list box. Click "next" button, select "install shown I manually select from a list of hardware in the pop-up dialog box (Senior) radio, and then click" next "button, select" modem "option in the dialog box. Continuing to click the next button, in the dialog box shown, select "do not check my modem, and I will select" from the list. Click "next" button to pop up a dialog box, choose a connected COM, choose a unused COM port, the computer will usually identify themselves (which is actually a virtual COM port), and follow the prompts to continue, click "next" button to complete the virtual the modem is installed. In the "network connection" dialog "network task" column click "create a new connection" connection, and then in the new connection wizard prompted to create a new dial-up connection, select the virtual modem installed above. In control panel, double-click "infrared" in the "options", select "enable infrared communication, laptop computer and mobile phone to open the infrared ports; infrared port settings on a mobile phone (different mobile phone settings are not the same). The infrared port mobile phone facing the infrared window of notebook computer (usually not more than the distance between the 30cm is valid), after the alignment of notebook computer will be prompted to find an infrared transmitting device (i.e. mobile phone), then double-click the front to create a dial-up connection, enter dialing ISP phone number, user account and password information. After successful dial-up, the mobile phone screen shows the received and sent data, confirmed that the phone is being carried out data communications. (Demi)