3m,胶sgs,报告

3m,胶sgs,报告 :报告 sgs sgs报告是什么 sgs报告有效期是多久 sgs认证 篇一:SGS中英文版 硅胶-SGS报告 Test Report No. CANEC1208348501 Date: 02 Jul 2012 Page 1 of 7 测试报告 ZHAOQING HAOMING ORGANIC SILICON MATERIAL CO.,LTD 肇庆 皓明有机硅材料有限公司 LIANTANG INDUSTRIAL DISTRICT,LIANHUA TOWN,DINGHU DISTRICT,ZHAOQING CITY,GUANGDONG PROVINCE CHINA 中国 广东 肇庆市 肇庆鼎湖莲花镇莲塘工业区 The following sample(s) was/were submitted and identified on behalf of the clients as : SILICONE INDUSTRIAL SEALANT 以下测试之样品是由申请者所提供及确认:电子阻燃密封胶 SGS Job No. : SGS工作编号 Tested Sample Info. : 测试样板信息 Client Ref. Info. : CP12-010448 - GZ HMG-628 HMG-628, HM-40, HMG-628B, HMG-628C, HMG-628E, HMG-628X, HMG-636, HM-656, HM-40D, HM-240, HM-2577, HMG-301, HMG-301T, HM-399, HM-618, HM-623, HM-624, HM-626, HM-627, HM-629, HM-631, HM-642, HM-645, HM-648, HM-662, HM-665, HM-668, HM-822, HM-825, HM-818, HM-828, HM-828T, HM-832, HM-835, HM-838, HM-704, HM-705, HM-706 客户产品信息 Date of Sample Received : 26 Jun 2012 26 Jun 2012 - 02 Jul 2012 Selected test(s) as requested by client. 样板接收时间 Testing Period : 测试周期 Test Requested : 测试要求 Test Method : 测试方法 Test Results : 测试结果 Conclusion : 根据客户要求测试 Please refer to next page(s). 请参看下一页 Please refer to next page(s). 请参见下一页 A:Based on the performed tests on submitted samples, the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE) comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. 根据客户提供 的样品测试其铅，汞，镉，六价铬，多溴联苯PBB和多溴二苯醚 的测试结果符合ROHS指令(2011/65/EU)和(2002/95/EC)修定 指令的要求 结论 Signed for and on behalf of 签名 SGS-CSTC Ltd. 0000209178 Test Report Test Results : No. CANEC1208348501 Date: 02 Jul 2012 Page 2 of 7 测试结果 Specimen No.样品数量 1 SGS Sample ID SGS样品ID号 Description 描述 Black paste 黑色膏状 CAN12-083485.001 Remarks : 备注 (1) 1 mg/kg = 1 ppm = 0.0001% (2) MDL = Method Detection Limit (3) 方法检测限 ND = Not Detected ( MDL ) (4) - = Not Regulated 未检出 ( MDL) Test Method : With reference to IEC 62321:2008 使用IEC 62321:2008 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 (1) Determination of Cadmium by ICP-OES. 测试方法 镉测试使用ICP-OES (2) Determination of Lead by ICP-OES. 铅测试使用ICP-OES (3) Determination of Mercury by ICP-OES. 汞测试使用ICP-OES (4) Determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. 六价铬测试使用UV-VIS (5) Determination of PBBs / PBDEs content by GC-MS. P(来自:www.XIelw.Com 写 论文网:3m,胶sgs,报告)BBs / PBDEs测试使用GC-MS 测试项目 Cadmium (Cd) 镉 Lead (Pb) 铅 Mercury (Hg) 汞 Hexavalent Chromium (CrVI) 六价铬 Sum of PBBs 多溴联苯测试之和值 Monobromobiphenyl单溴联苯 Dibromobiphenyl 二溴联苯 Tribromobiphenyl三溴联苯 限值 100 1000 1000 1000 1000 - - - mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 2 2 2 2 - 5 5 5 ND ND ND ND ND ND ND ND 0000209178 Tetrabromobiphenyl 四溴联苯 Pentabromobiphenyl 五溴联苯 Hexabromobiphenyl 六溴联苯 Heptabromobiphenyl 七溴联苯 Octabromobiphenyl八溴联苯 Nonabromobiphenyl 九溴联苯 Decabromobiphenyl 十溴联苯 Sum of PBDEs 多溴二苯醚测试之和 Monobromodiphenyl ether单 溴二苯醚 - - - - - - - - mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 5 5 5 5 5 5 5 - 5 ND ND ND ND ND ND ND ND ND 1000 Test Report No. CANEC1208348501 - - - - - - - - - mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg Date: 02 Jul 2012 5 5 5 5 5 5 5 5 5 Page 3 of 7 ND ND ND ND ND ND ND ND ND Dibromodiphenyl ether二溴二苯醚 Tribromodiphenyl ether 三 溴二苯醚 Tetrabromodiphenyl ether四溴二苯醚 Pentabromodiphenyl ether 五溴二苯醚 Hexabromodiphenyl ether 六溴二苯醚 Heptabromodiphenyl ether 七溴二苯醚 Octabromodiphenyl ether 八溴二苯醚 Nonabromodiphenyl ether 九溴二苯醚 Decabromodiphenyl ether 十溴二苯醚 Notes : 注释 (1) The maximum permissible limit is quoted from directive 2011/65/EU, Annex II 最大限值引用指令2011/65/EU, Annex II (HBCDD) Test Method : Determination of HBCDD by GC-MS based on IEC 62321:2008. 测试方法:测试HBCDD使用GC-MS基于IEC 62321:2008的标准 Test Item(s) 测试项目 Limit Unit MDL 001 Hexabromocyclododecane (HBCDD)-不可有 mg/kg 10ND Notes : 注释 (1) Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC: 参考方法:ROHS指令(2011/65/EU)和(2002/95/EC)修定指令 的要求 (2) Hexabromocyclododecane (HBCDD) is considered as a priority for risk evaluation and substance restriction. 六溴环十二烷(HBCDD)被认为是一个优先进行风险评估和物 质限制 C:Phthalate邻苯二甲酸盐(或邻苯二甲酯) Test Method : Determination of phthalates by GC-MS based on EN 14372:2004. 测试方法:测试使用GC-MC 基于EN14372:2004 标准 Dibutyl Phthalate (DBP) Benzylbutyl Phthalate (BBP) Bis-(2-ethylhexyl) Phthalate (DEHP) % (w/w) % (w/w) % (w/w) 0.003 0.003 0.003 ND ND ND Notes 注释 (1)Reference Information: Directive 2011/65/EU recasting RoHS directive 2002/95/EC: 参考方法:ROHS指令(2011/65/EU)和 (2002/95/EC)修定指令的要求 0000209178 Bis (2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP) and Dibutyl phthalate (DBP) are considered as a priority for risk evaluation and substance restriction. DEHP,BBP,DBP, 被认为是一个优先进行风险 评估和物质限制 Remark: The result(s) shown is/are of the total weight of wet sample. 备注:结果显示是湿样的总重量 篇二:3M OCA测试报告 他喜龙PC/PMMA复合板测试报告 一、测试目的及要求 二、评价项目: 三、试验结果: 四、.检验良率 五、可靠性测试 六、试验结论: 3M125umOCA经测试符合我司要求，可靠性测试后无功能不良， 建议小批量试用。 报告人:程旭东 审核: 日期:2012-11-2 篇三:SGS胶带测试 SGS胶带测试——压敏胶带通用测试 Universal Test Methods for Pressure-Sensitive Tapes Total Thickness总厚度 ASTM D3652-01 Thickness of Adhesive胶粘层厚度 ASTM D3652-01 Thickness of Liner基材厚度 ASTM D3652-01 Width宽度 ASTM D5750-95(2001) Length长度 ASTM D5750-95(2001) Unwind Force解卷力 ASTM D3811-96 Tack(rolling ball method) 初粘性(滚球法) ASTM D3121-06, GB 4852-2002 Peel Adhesion at 180? 180?剥离强度 ASTM D3330-04, GB 2792-1998 Peel Adhesion at 90? 90?剥离强度 ASTM D3330-04 Holding Power持粘性 ASTM D3654-066, GB 4851-1998 Tensile Strength拉伸强度 ASTM D3759-05, GB 7753-87 Elongation断裂伸长率 ASTM D3759-05, GB 7753-87 Water Penetration Rate水渗透率 ASTM D3816-96(2003), GB 15330-94 Water Vapor Transmission水蒸气透过性 ASTM D3833-96(2001), GB 15331-94 Adhesion to Fiberboard对纤维板的持粘性 ASTM D2860-04 Accelerated Weathering by Xenon-Arc Exposure氙灯加速老化 ASTM D6551-05 Accelerated Weathering by Carbon-Arc Exposure碳弧光加速老化测试 ASTM D3815-05 Water Resistance耐水性 ASTM D5570-94 Accelerated aging加速老化测试 ASTM D3611-06 Pb,Cd,Hg,Cr Content包装材料环保测试 94/62/EC 6+ SGS胶带测试——电子电气用压敏胶带的标准测试 ASTM D1000-04 Standard Test Method for Pressure-Sensitive Adhesive-Coated Overall thickness总厚度 ASTM D1000-04 Length of tape in a roll卷长 ASTM D1000-04 Tensile breaking strength拉伸断裂强度 ASTM D1000-04 Elongation断裂伸长率 ASTM D1000-04 Adhesion strength to steel剥离强度(对钢板) ASTM D1000-04 Adhesion strength to backing剥离强度(对基材) ASTM D1000-04 Flagging翘边测试 ASTM D1000-04 Thermosetting Properties热硬化性能 ASTM D1000-04 Dielectric Breakdown Test击穿电压 ASTM D1000-04, ASTM D149-97 Effect of Accelerated Aging on Dielectric Breakdown Voltage for High-Temperature Tape耐高温胶带的热老化测试 ASTM D1000-04, ASTM D149-97 Flammability阻燃性 ASTM D1000-04 Bond Strength after Solvent Immersion溶剂浸泡后的粘合强度 ASTM D1000-04 Oil Resistance耐油性 ASTM D1000-04 Resistance to Accelerated Aging(Heat and Moisture)耐温湿老化 ASTM D1000-04 SGS胶带测试——聚氯乙烯、聚乙烯和橡胶绝缘胶带 UL 510-05 Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape For all tapes: Sunlight resistance test (carbon arc) 耐候性测试(碳弧灯) UL 510-05 (for 100hrs) For thermoplastic tape: Overall thickness 总厚度 UL 510-05 Tensile Breaking Strength 拉伸断裂强度 UL 510-05, ASTM D1000-04 Elongation 断裂伸长率 UL 510-05, ASTM D1000-04 Dielectric Breakdown Test 击穿电压 UL 510-05, ASTM D1000-04 Adhesion Strength 剥离强度(对不锈钢板或基材) UL 510-05, ASTM D1000-04 Moisture Absorption Test 耐湿测试 UL 510-05, ASTM D1000-04 Exposure to Heat Test 耐热测试 UL 510-05 Exposure to Cold Test 耐寒测试 UL 510-05 Deformation Test变形测试 UL 510-05 Storage Test 储存测试 UL 510-05 For rubber tape: Tensile Strength拉伸强度 UL 510-05, ASTM D412-06 Elongation断裂伸长率 UL 510-05, ASTM D412-06 Storage Test储存测试 UL 510-05 Dielectric Breakdown Test介电击穿电压 UL 510-05