[资料] 主流牌子液晶显示器进入
工程
路基工程安全技术交底工程项目施工成本控制工程量增项单年度零星工程技术标正投影法基本原理
菜单方法集锦([data] mainstream brand LCD into the Project menu method highlights)
[资料] 主流牌子液晶显示器进入工程菜单方法集锦([data]
mainstream brand LCD into the Project menu method highlights)
[data] mainstream brand LCD into the Project menu method highlights
Mainstream LCD display Project menu method highlights
As has been the reason of LCD TV LCD is also concerned, know the Project menu. But to buy when there is no work done, only opened a brand. This is it. Open the Project menu advantage is to use time and view the LCD screen LCD manufacturers, namely ETI and PANEL..
Acer (ACER)
1, shutdown state, first press the AUTO and MENU keys, and then press the POWER button to boot
2, after the boot, all the keys are released
3, and then press the MENU button, at this time the desktop will pop up the menu, but the top left corner has been more than a F word
4, then click the menu left button, move the icon to the word "F"
5, and then press the MENU button, you can enter the ACER factory model
BenQ (BENQ)
BenQ's early products
1, the shutdown state, first press the "MENU" button and "EXIT" button, press the POWER button to boot
2, after the boot, press the "I" button, you can enter the factory mode
BenQ's newer products:
1, the first shutdown, and press the power button, key button and menu button
2, after the boot press "down" can enter
LG
1, shutdown state, first press the "MENU" button, and then press the POWER button to boot
2, then press the MENU button to enter the factory mode:
ViewSonic (VIEWSONIC)
1, shutdown state, first press the "2" button, and then press the "POWER" button
2, after opening the monitor, press the "1" button to enter the menu
3, at this point, the menu option ends up with a "Factory menu" option
4, press the "2" button at this time, you can enter the factory mode
Samsung (SAMSUNG)
1, first in the OSD menu, brightness and contrast values were adjusted to 0
2, then enter the menu information item, press the "SOURCE" key (that is, the ENTER key), hold for 5 seconds, you can enter the factory mode
(some Samsung monitors don't have SOURCE keys, and the effect of pressing the ENTER key is the same at this point)
PHILPS (PHILIPS)
1, in the shutdown state, while holding down the "AUTO" and "MENU" key, and then press the "POWER" button to turn on the display
2, at this time, press the "MENU" button to open the OSD menu, you will find the OSD menu will appear new options
3. Select the OSD cursor
4, press ENTER to enter the factory mode
Some models need to hold the AUTO and OK keys at the same time, turn on the machine and open the OSD menu to enter
DELL (DELL)
1, in the state of shutdown, first hold down the "AUTO" and "+" button, and then press the power button to turn on the monitor
2, and then press the "MENU" button
3, at this point in the menu, the last FACTORY RESET option will have an additional "Factory" option
4, check, press "Enter" to enter
AOC (AOC)
1, press menu to bring up the main menu
2. Move the cursor to the full screen zoom icon, and press the MENU button to open the AOC project mode menu
If this method doesn't work, try the following:
In the boot state, press and hold MENU, unplug the power, and plug in the power, the display after the release of MENU, and then press MENU, you can enter the factory mode. Shutdown status, press MENU, and then press the power switch, after showing the release of MENU, will lock OSD, the same way to unlock.
HP (HP)
1. Turn off the screen first and hold the MENU button by hand
2, then turn on the monitor (MENU press and hold) until the signal appears and when the signal disappears, loosen the MENU key
3, press the MENU button again. A menu appears
EMC display method into the factory pattern is very special, unplug the power line, press on the key does not let go, then plug the power line, the power switch is turned on, wait a moment, appear on the screen OSD menu is already entered the factory adjustment mode.
Press the "MENU" button to exhale the OSD menu,
Press the right button to move the cursor to the "ZOOM" position and press the two "MENU" button until the factory mode's adjustment menu appears. The founder, the microprocessor (MCU) used in the direction of the TCL display, is a manufacturer whose approach to the factory model is similar
And then talk about the panel: the market can buy PVA, MVA and TN of the three display panel, VA panel, color response time is short, but generally more expensive; IPS panel, color is very good, but the response time is long; the TN type panel, color is poor, but the response time is very fast, the market 90% is this kind of panel display.
And some display factory patterns commonly used in English abbreviations words;
1. Automatic Brightness automatic brightness adjustment, the display automatically adjusts the brightness of the screen image according to the brightness of the ambient light.
2. ABL Automatic Brightness Limited automatic brightness limit, set this option to adjust the maximum brightness range of the display screen.
3. ADJUSTING is in tune
4. ANALOG analog signal input
5. AUTO CONTRAST automatic contrast adjustment
6., AUTO, TUNING automatic adjustment
7. B-Bias, Blue, Bias blue gun bias (cutoff voltage) adjustment
8. B-Gain Blue Gain blue gun gain adjustment
9. BCL (ABL, Automatic, Brightness, Limited) automatic brightness limit adjustment
10. BC (Bottom, Corner) screen image lower angle adjustment.
11. BI (SET, BURN-IN, OFF/ON or BURN OPTION) aging switch CONTRAST contrast
12. BIAS bias voltage adjustment
(W, C$, H3 {, N) X# m13. BL |! (Bottom Left Landing) at the bottom
left corner of the adjustment
14. BL (BLACK, LEVEL) clamp level adjustment
15. BR (Bottom, Right, Landing or B-R Landing), bottom, right
angle adjustment
16. BRIGHTNESS brightness!
17. BT BURNIN TIME aging time setting
18. BURN aging switch set
19. BU BurnIn Select aging switch settings
20. C1 9300 color temperature
21. C2 6550 color temperature
22. CC C CCorrection adjustment
23. CLOCK signal clock frequency selection
24. CLOCKPHASE signal clock phase selection
25. COOL cold tones
26. COLOR ADJUST color adjustment
27. CUTOFF cutoff voltage adjustment
28. DEFO (Deflect, IC) line oscillating chip model selection
29. DEFO (TDA4856, TDA4841) oscillating integrated block IC selection
30. DEGAUSS degaussing
31. DE Deflection IC (TDA4856 TDA4841) for oscillation of IC choice, mainly manufacturers to reduce production cost and design, in the same production line of different types of display, the basic circuit are the same, but the IC is not the same, the IC type, select the corresponding changes to different types of display. Changing the line oscillation IC can change the maximum line oscillation frequency.
32., DE, SWITCH, DE, manual demagnetization, opening and closing
33. EE EEPROM ERASE erase EEPROM content
34. ES (EV, Sub, Contrast) EV mode vice contrast adjustment
35. EX MOIRE VER Moore adjustment circuit version number
36. EXIT exit factory mode OSD menu
37. FC (Focus) focusing
38. FH MAX FREQ set the maximum frequency display
39. FK H FOCAD horizontal focusing dynamic adjustment
40. FREQ (Max Frequency) the maximum frequency for frequency selection
41. GS (GRAP, SUB, CONT) image mode contrast
42. G-Bias green gun offset adjustment
43. G-Gain green gun gain adjustment
44. GAIN gain adjustment
45., HBT, H, BOT, CORNER horizontal bottom angle adjustment
46. HBO HI BRIGHT maximum brightness limit
47. H-Corner Bottom horizontal bottom angle adjustment
48., H-CONV, Horizontal, Conversation level convergence adjustment
49. HF (H, FOCUS) horizontal focusing adjustment
Fifty
HI (High, Voltage) positive voltage adjustment, which replaces the "SCREEN" knob on the FBT above the display, and directly adjusts the brightness of the display screen.
51. HL (Horizontal, Linear) screen image horizontal linear adjustment
52. H-MOIRE (Horizontal, Moire) horizontal interference adjustment of screen image
G0 D (R1) + W, d53. HO (Horizontal Offset) Deputy level to adjust the width of the screen image
54. HP (H-Position or Horizontal Position) adjust the horizontal center of the screen image
55. HS (H-Size or Horizontal Size) screen image horizontal width adjustment
56. HS (Horizontal, S, Linear), horizontal S linear adjustment.
57., HTC, H, TOP, CORNER level, top angle adjustment
58. HV anode high voltage adjustment, PHILIPS and LG and other CRT monitors in the FBT has been omitted on the anode high voltage (SCREEN) adjustment potentiometer, but in the factory mode by adjusting the HV value to achieve!
59. IMAGE image quality adjustment
60. INPUT LEVEL input signal level selection
61. JK (TIME (SEC)) OSD menu residence time
62. KEY (KEY, OPTION) panel button operation mode selection
63. KY (Key, Select) panel button selection, select the 4 button or the five button panel.
64. LH (Brightness, Model) brightness mode selection (BL, BM, BH)
65. LANGUAGE language selection
66., M1, SAVE, MODE1, save to mode 1
67., M2, SAVE, MODE2, save to mode two
68. NS N-S LANDING up and down role purity adjustment
69. OF (DMPS, OFF) energy saving switch control
70. OH (OSD, Horizontal, Position) OSD menu horizontal adjustment
71. OV (OSD, Vertical, Position) OSD menu vertical adjustment
72. Parallel screen image, flat quadrilateral adjustment
73. PCO EZ PC switch
74. PHASE LCD signal phase adjustment
75. Pin Balance screen image bucket adjustment
76. Pincushion screen image pillow distortion adjustment
77. ROTATION screen image overall rotation
78. R-Bias red gun offset adjustment
79. RESET reset to restore factory value
80. R-Gain red gun gain adjustment
81. SB (Sub, Brightness) sub brightness adjustment
82. SB (SBQ, 1,2,3) sub brightness mode selection
83. SC (SUB-CONTRAST) contrast adjustment
84. S - Correction image S linear correction adjustment
85. SHARPNESS image sharpness adjustment
86. SL (Auto, Address) OSD menu settings information write to address port
87. SPO VOLUME display comes with power amplifier volume adjustment
88. SUB-H SIZE secondary horizontal adjustment, same as OH (Offset Horizontal)
89. Sub Brightness secondary brightness adjustment
90., Sub, Contrast, vice contrast adjustment
91. TC (Top, Corner) image top angle adjustment
92. TI SWITCH IMAGINE user mode manual image adjustment switch
93. TL (Top, Left, Landing) top left corner adjustment
94. Tm (Timer or Used Time). This feature is used to record the boot time of the monitor.
95. Trapezoid screen image ladder adjustment
96. TR (Top, Right, Landing) top left corner adjustment
97. USER ADJUSTMENT, return user adjust mode.
98. VB (Vertical, BLANK) vertical clamp level adjustment
99., VB, CENTER, V, LINEAR, vertical center, linear adjustment
100. VC (Vertical, Linear, Balance) vertical C linear adjustment
101., V-CONV, V-CONV, Vertical, Conversation, vertical convergence adjustment
102. VDF (Vertical, Dynasty, Focus) dynamic vertical focusing adjustment
103. VF (V, FOCUS) vertical focusing adjustment
104. VG (V, GAIN) vertical gain adjustment
105. VM, V-MOIRE (Vertical, Moire) vertical interference adjustment
One hundred and six
VOLUME display comes with power amplifier volume adjustment
107. V-Position screen image center vertical adjustment
108. VS (Vertical Linear) vertical S linear adjustment
109. V-Size vertical width
110. WARM warm tones
111. XR X ray XRAY switch
112. DC DC-Offset
113. HB HB POS
114. HD
115. HE
116. HK
117. HVOL
118. KM
119. SW
120. VE
121., VL, SIM, V, LINEAR
122., B-R, LANDING, right lower role, purity adjustment
123., T-R, LANDING, upper right, purity adjustment
124., B-L, LANDING, left lower role, purity adjustment
125., T-L, LANDING, left upper role, purity adjustment
This article comes from:
mod=viewthread&tid=448701&reltid=490859&pre_pos=2&ext= (www.chinafix.com.cn), provenance: