Amlogic方案软件升级方法.doc文档
Amlogic Solution Software Upgrade Method
Caution: Software Upgrade is a complicated progress, must be done by a professional.
Solution: Amlogic
Disc: CD-R/RW
Equipment: Computer with CD Recordable driver
Process:
1. Check the player Software version
a. Switch on the player.
b. Press ‘Setup’ button on the remote control.
c. Press ‘8-8-2-9-1-8’ button on the remote control.
d. Press the ‘Cursor-Down’ button continuously on the remote control, until the hidden menu shows and highlights, then press the ‘Cursor-Right’ button on the remote control.
d. Check the TV screen as following:
Loader : XXXXXXXX
Software : XXXXXXXX
Region Code: XXXXXXXX
2. Burn CD-R/RW disc
a. Burn the Decode software
1) Put an empty CD-R/RW disc in a computer driver.
2) The CD's ID ( label ) no need to be changed.
3) The file name no need to be changed, too.
4) Select the burn-in data format to ISO9660 and burn the file in the CD-R/RW.
b. Burn the Servo software
1) Put another empty CD-R/RW disc in a computer driver.
2) The CD's ID ( label ) no need to be changed.
3) Change the upgrade file name as: VT7208.BIN,.
Caution: A) the upgrade file name must be CAPITAL word.
B) ‘BIN’ is the extent name of the software file, means the file is a binary file.
4) Select the burn-in data format to ISO9660, Mode 2 & no multi-session, and 2X speed.
5) burn the file in the CD-R/RW.
3. Upgrade the player Decode or Servo Software
a. Put the CD-R/RW in the player.
b. If the player finds the upgrade file, it will pop a dialog to give user a tip to upgrade, press OK
to upgrade the SW. TV screen shows the percentage of the progress.
c. Wait two or three minutes, for the upgrading.
Caution: Please don't switch the power off! Otherwise, the player will hang up and never switch
on.
d. When the player finish upgrading, set will power off automatically. Please unplug the power
cord, then plug it again. Switch on the set and take out the CD-R/RW disc.
e. Software upgrade successfully.
Amlogic方案软件升级方法
警告:软件升级是一项非常复杂的工作,非专业人员切忽操作!
方案: Amlogic
光盘: CD-R/RW
所需设备: 带CD刻录功能的电脑
过程:
1. 检验机器的软件版本
a. 打开机器，并开仓;
b. 按遥控器“设置”键进入设置菜单;
c. 依次按遥控器“8-8-2-9-1-8”;
d. 连续按遥控器“下游标”键，直到隐藏菜单出现并显示高亮，按“右游标”键;
e. 检测电视机屏幕显示的软件版本信息:
机芯: XXXXXXXX
软件 : XXXXXXXX
区域码: XXXXXXXX
2. 刻录CD-R/RW
a. 将一张空CD-R/RW光盘放入电脑光驱;
b. 光盘的光标不用更改;
c. 将文件名改为:VT7208.BIN;
警告:1) 文件名必须用大写字母;
2) “BIN”是文件的扩展名
d. 请选择ISO9660，模式2，非多扇区，及最好选择2倍速的抄写格式，并刻录光盘。
3. 升级机器软件
a. 将已经刻录好的CD-R/RW光盘放入机器。 b. 机器找到升级光盘后，电视屏幕会显示提
示语
考试前广播提示语公示语翻译论文关于早读的提示语简短部编版三年级上册语文提示语练习提示语的三种用法练习
，按下遥控器“OK”键，机器开始升级。电视屏幕显示升级的进程。
c. 等待机器升级2到3分钟。
警告:升级过程中切忽断电，否则机器会由于程序无法刷新而导致死机～ d. 升级完毕机器将自动进入待机状态，请将电源插头拔掉后再重新插上。重新启动机器，取出光盘。
e. 机器升级成功。
浙公网安备 33021202002483