FirstMap-SPEC-SHEET-2012L

Get the whole picture TM FirstMap™ Specifications www.imperiuminc.com 5901-F Ammendale Road, Beltsville, MD 301/431-2900 sales@imperiuminc.com Page 1 General Dimensions (W x H x D) Camera: 7.8” x 3.5” x 3.0” (19.8 cm x 8.8 cm x 7.6 cm) Controller: 12.5” x 8.0” x 3.5” (31.7 cm x 20.3 cm x 8.8 cm) Weight Camera: 1.3 lbs. (0.6 kg) Controller: 6.0 pounds (3.2 kg) Camera Cable 8.0’ (2.4 m) length Focus Range Steel:0” to 2.0” (0 to 5.0 cm) Composites:0” to 2.0” (0 to 5.0 cm) Aluminum: 0” to 3.0” (0 to 7.5 cm) Data Storage 500 megabytes RAM; 80 gigabyte hard drive Battery Rechargeable14.4 volt lithium-ion;90 minute battery life; built-in charger Power Requirements 110/240 VAC; 50/60Hz System Hardware &Software Intel Celeron 1.6 gigahertz processor; Microsoft Windows XP Test Modes C-scan: pulse-echo, through transmission A-scan: pulse-echo, through transmission, dual element FirstMap™ Specifications www.imperiuminc.com 5901-F Ammendale Road, Beltsville, MD 301/431-2900 sales@imperiuminc.com Page 2 Inputs/Outputs Display high brightnessTFT color LCD; SVGA; 800W x 600H; 6.75” W x 5.25” H; 8.4” diagonal (17 cm x 13 cm; 21.6 cm) Sunlight readable Display Modes C-scan, A-scan, combined C/Ascans Normal & full screen Software AcoustoVision™ Touchscreen GUI Ethernet 100 BaseT (1) RJ45, F jack Wireless 802.11 a/b/g (supports remote NDI system) (1) 4.25” antenna VGA Controller VGA 800W x 600H (1) 15-pin HD D-sub, F USB USB 2.0 (2) USB jacks C-scan Acoustic Lenses Threeelement F/1 lens set Acoustic Field of View 1.0” x 1.0” (2.5 cm x 2.5 cm) instantaneous Imaging ASIC Array Patented Digital Acoustic Video™ Version 6.0 Array Elements 120 x 120 (14,400 pixels) Pixel Size 100 microns C-scan Video Rate 30 frames per second X/Y Spatial Resolution 600 microns (0.6 mm) @ 5 MHz Dynamic Range 60 dBinstantaneous Depth Resolution 10 ns Image Acquisition Range Variable delay from0 µs to 250 µs Image Acquisition Length Variable detection window from 0 ns to end of range in 10 ns increments Match Gates C-scan gate start/width can match to A-scan gate start/width X,Y Defect Sizing User calibrated grid orpoint-to-point manual sizing Image Capture C-scan, A-scan, combined C/A scans Image Capture Type JPEG;on-board storage up to 1 million image capture files Video Capture Type MPEG-3; 60 s max. recordtime/file;on-board storage up to 100,000 files FirstMap™ Specifications www.imperiuminc.com 5901-F Ammendale Road, Beltsville, MD 301/431-2900 sales@imperiuminc.com Page 3 A-scan Gain 0 to 83dB Maximum Input Signal 5 Vp-p Receiver Input Impedance 10 MΩ ± 5% Receiver Bandwidth 0.2 to 120 MHz @ -3 dB A-scan Rectification Full, half, none Receiver Delay 0 to 0.2 µs Digital Filter Settings Yes Reject Variable from 0% to 100% FSH Time Corrected Gain Up to 5 reflected peaks can be used for calibrating TCG Amplitude Measurement 0% to 110% full screen height with 0.125% resolution Measurement Rate 250 Hz (equivalent to PRF) A-scan Gate Start Variable over entire displayed range A-scan Gate Width Variable from gate start to end of displayed range A-scan Gate Height Variable from 1% to 100% FSH Reference Cursors 2 reference cursors Alarms Alarmfeature for 2nd reference cursor Acoustic Velocities Pre-installed, editable library of 40commonly inspected materials Pulser Pulses per Burst Up to 20 square wave pulses Pulser Voltage 0 V to 1500 V Pulse Repetition Frequency 250 Hz Pulser Rise Time < 15 ns Bandwidth Adjustable from 0.5 MHz to 7.5 MHz External Transducer Dual-element, adjustable frequency FirstMap™ Specifications www.imperiuminc.com 5901-F Ammendale Road, Beltsville, MD 301/431-2900 sales@imperiuminc.com Page 4 2-Dimensional Scanning & Stitching Encoders Two 1.0” (2.5 cm) diameter wheels; 20 steps/mm resolution Scanning/Stitching Software AcoustoVision™ add-on module Scanned Imaging Features real-time scan display; automatic image correction; scans stored as JPEGs Scan Area 12.0” x 12.0” (50 cm x 50 cm) per image Attachments User removable encoders and external transducer Certifications and Environmental Qualifications ASTM E317-06a Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems ASTM 1324-11 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments Operating Temperature 0° C to 50° C (32° F to 122° F); camera head contact to 400 °F (205 °C) General Inputs/Outputs C-scan A-scan Pulser 2-Dimensional Scanning & Stitching Certifications and Environmental Qualifications