UMT系列摩擦试验机UMT Series Testers

One Precision Platform UMT-2 Universal Micro Materials Tester UMT-3 Universal Macro Materials Tester UMT Series Testers Lubrication Environmental Wear Micro/Nano Indentation Micro/Nano Scratch Strain/Deformation Friction Multi-Axis Fatigue UNMT-1 Universal Nano & Micro Tester Comprehensive Materials Testing for Mechanical and Tribological Properties The Universal Nano+Micro+Macro Tester platform comes in three main configurations: for comprehensive mechanical tests of thin films and nano- structured materials, with a load range of 1 mN to 10 N, for comprehensive mechanical tests of coatings and materials, with a load range of 1 mN to 200 N, for comprehensive mechanical tests of lubricants, metal and ceramic materials, with a load range of 0.1 N to 1 kN. UNMT-1 UMT-2 UMT-3 nano and micro micro- macro- APPLICATIONSAPPLICATIONS Automotive, Aerospace Microelectronics Electric Contacts Metals, Ceramics Bio Materials, Medical MEMS, Optics Flexible & Hard Media Composite Materials Lubricants, Additives Thin Films, Coatings Polymers, Elastomers Paper, Fabric UNIVERSAL NANO, MICRO, AND MACRO MATERIALS TESTERS (UMT) Parameters Monitored Parameters Monitored X,Y, Z Forces X, Y, Z Torques X, Y, Z, Q Positions Wear Depth & Rate, Deformations Acoustic Emission Electrical Resistance Electrical ceCapacitan Temperature Humidity Optical Images, Digital Video Data Acquisition Data Acquisition 200 kHz Data Rate 16 Sensor Inputs Horizontal & Vertical Rotation X Y Translation Thermal Control Vacuum Chamber Humidity Control Lower Specimen Lower Specimen Fast Oscillations Rotation X Y Z Translation Upper Specimen Upper Specimen 16 Bit Resolution HARDWAREHARDWARE FUNCTIONAL TESTINGFUNCTIONAL TESTING SOFTWARESOFTWARE Data Monitor Recording Real-Time Programmable Filtering Motion Control Synchronized Motions Programmable Data Presentation Data Analysis Format Conversions Data Statistics Charts Forces & Torques CETR, INC. 1715 DELL AVE, CAMPBELL, CA 95008 PHONE 408.376.4040 FAX 408.376.4050 INFO@CETR.COM Adhesion Delamination Young’s Modulus Storage modulus Rotary Linear Reciprocating Abrasive Fretting Static Dynamic Multi-axis Tension Elasticity Plasticity Pull-up Stiction Hydrodynamics Mixed Temperature Humidity Scratch Indentation Adhesion Friction Fatigue Environmental Lubricity Strain Scope Mode Velocities & Positions Wear Technical Highlights MULTIPLE TESTS friction stick-slip wear stiction delamination indentation fatigue strain torsion bending MULTIPLE SENSORS force 6-D forces torques acoustic emission wear deformation electrical resistance temperature humidity vision system AFM SERVO-CONTROL on nano, micro and macro scales: - static and dynamic - ultra-low-speed (0.1 micron/s) - adhesive, abrasive and scratching - pull-off adhesion/ - scratch-adhesion and - , hardness and elastic modulus - multi-cycle, multi-axis - , elasticity, plasticity and creep - compression, tension and - three-point for IN-SITU test monitoring: - ultra-precision sensors of the proprietary technology and patented design (1 mN to 1 kN) - sensors for simultaneous measurements of 3 and 3 in all X, Y and Z axes - high-frequency sensors of the proprietary design, ultra- sensitive to tiniest cracks and wear - and sensors of micro (0.5 micron) and nano (20 nm) resolution - contact and surface (mOhms to MOhms) for detection of film failure or buildup - and sensors - integrated for micro-positioning and digital video of the failure dynamics - integrated for periodic nano-imaging of test surfaces, wear tracks, indents and scratches Precision of loads, speeds, and positions for uniquely Bearings Valves Connectors Commutators Contact/Wires Screw-in-Nut Pin-in-Chain Shaft-in-Seal Razor-on-Hair Brush-on-Teeth Orthopedic Joints Semicon Wafers Head-on-Disk Cutting Tools Contact Lenses Optical Media/Lenses IN D U ST R IA L Pin/Ball-on-Disk Block/Pin-on-Ring Crossed-Cylinders Disc/Plate-on-Disc/Plate Indenter-on-Plate 4-Balls ST A N D A R D disc-on-disc module reciprocation module owith 300 C chamber block-on-ring module pin-on-disk module with o1000 C chamber AFM module nano-indenter ISO/ASTM/DIN Standards UNMT-1, UMT-2 AND UMT-3 TEST SCHEMATICS (EXAMPLES) WORLD LEADERS IN MATERIALS & TRIBOLOGY TEST INSTRUMENTATION WWW.CETR.COM UNIVERSAL NANO, MICRO, AND MACRO MATERIALS TESTERS (UMT) Lower Rotation (horizontal axis) with Upper Linear or Rotary Motion CETR, INC. 1715 DELL AVE, CAMPBELL, CA 95008 PHONE 408.376.4040 FAX 408.376.4050 INFO@CETR.COM Four Types of Drive Modules Lower Ring/Bearing: 10 to 80 mm Rotation: cw/ccw, 0.1 to 5,000 rpm Options: fluid bath, environmental chamber Block-on-Ring TestsBlock-on-Ring Tests Ball/Pin-on-Ring TestsBall/Pin-on-Ring Tests Single/Multi-Crater TestsSingle/Multi-Crater Tests Upper Block or Plate: 1 to 150 mm Narrow Wear Track: stationary block/plate Wide Wear Track: sliding block/plate, 0.001 to 10 mm/s Upper Ball: 1.5 to 25 mm Upper Pin: 1 to 25 mm, flat, spherical or conical end Upper Ball or Pin: rotating cw/ccw, speeds 0.1 to 1,000 rpm Positioning on new craters: radial - range 360°, resolution 0.5 µm axial - range 75 mm, resolution 1 µm Lower High-Precision Linear with Upper Linear Motion Lower Plate: up to 150 mm Reciprocation Stroke: 75 mm Positioning Resolution: 1 µm Linear Speed: 0.001 to 10 mm/s Options: fluid bath, environm. chamber Single/Multiple Indentation TestsSingle/Multiple Indentation Tests Butterfly Wear-Track TestsButterfly Wear-Track Tests Upper Indenter: Rockwell, Vickers, Berkovich Positioning on new indents: automatic, resolution 1 µm Upper Pin: 1 to 25 mm Upper Ball: 1.5 to 25 mm Upper Sliding: synchronous with lower sliding Lower Linear Fast Reciprocation with Upper Linear Motion Wear & Fretting TestsWear & Fretting Tests Cross-Cylinder TestsCross-Cylinder Tests Engine TestsEngine Tests Lower Plate: up to 150 mm Lower Cylinder/Wire: 1 µm to 25 mm Reciprocation Frequency: 0.1 to 60 Hz Reciprocation stroke: 50 µm to 25 µm Options: fluid bath, environm. chamber Upper Pin/Ball/Block: stationary Multiple Wear Tracks: auto-positioning, distance 0 to 75 mm, resolution 1 µm Upper Cylinder: 0.1 to 25 mm Upper Tensioned Wire/Suture/Fiber: 1µm to 1 mm Narrow Wear Track: stationary upper sample Wide Wear Track: sliding upper sample, 0.001 to 10 mm/s Multiple Wear Tracks: auto-positioning 0 to 75 mm, resolution 1 µm Upper Piston Ring: stationary Lower Cylinder Liner: reciprocating Lower Rotation (vertical axis) with Upper Linear or Rotary Motion Lower Disc: up to 150 mm (optional 200 mm) Rotation: cw/ccw at two speed ranges: 0.1 to 5000 rpm or 0.001 to 50 rpm Upper Ball: 1.5 to 25 mm Upper Pin: cylinder 1 to 25 mm, flat, spherical or conical end Options: fluid bath, environmental chamber Single-Radius Pin/Ball-on-Disc TestsSingle-Radius Pin/Ball-on-Disc Tests Spiral-Wear Pin/Ball-on Disc TestsSpiral-Wear Pin/Ball-on Disc Tests Four-Ball TestsFour-Ball Tests Single/Multi-Crater TestsSingle/Multi-Crater Tests Disc/Ring-on-Disc Tests Upper Disc or Ring: up to 150 mm Stationary or rotating: cw/ccw, speeds 0.1 to 1,000 rpm Disc/Ring-on-Disc Tests Upper Pin or Ball: stationary during test, automatic positioning on disc radii 0 to 75 mm, resolution 1 µm Upper Pin or Ball: sliding radially on Lower Disc, speeds 0.001 to 10 mm/s Lower Disc’ angular speed auto- adjusted for constant linear speed Upper Ball: stationary in the center Three Lower Balls: immersed in fluid bath Upper Pin or Ball: rotating cw/ccw, speeds 0.1 to 1,000 rpm Positioning on new craters: automatic radial positioning, range 75 mm, resolution 1 µm circumferential positioning, range 360°, resolution 0.5 µm Page 1 Page 2 Page 3 Page 4