FRAC-L00-Title

FRAC-L00-TitleModeling Fracture and Failure with Abaqus Modeling Fracture and Failure with Abaqus Day 1 • Lecture 1 Basic Concepts of Fracture Mechanics • Lecture 2 Modeling Cracks • Lecture 3 Fracture Analysis • Workshop 1 Crack in a Three-point Bend Specimen • Workshop 2...

Modeling Fracture and Failure with Abaqus Modeling Fracture and Failure with Abaqus Day 1 • Lecture 1 Basic Concepts of Fracture Mechanics • Lecture 2 Modeling Cracks • Lecture 3 Fracture Analysis • Workshop 1 Crack in a Three-point Bend Specimen • Workshop 2 Crack in a Helicopter Airframe Component Modeling Fracture and Failure with Abaqus Day 2 • Lecture 4 Material Failure and Wear • Lecture 5 Element-based Cohesive Behavior • Workshop 3 Crack Growth in a Three-point Bend Specimen using Cohesive Connections (Part 1) • Workshop 4 Crack Growth in a Helicopter Airframe Component using Cohesive Elements • Lecture 6 Surface-based Cohesive Behavior • Workshop 3 Crack Growth in a Three-point Bend Specimen using Cohesive Connections (Part 2) Modeling Fracture and Failure with Abaqus Day 3 • Lecture 7 Virtual Crack Closure Technology (VCCT) • Workshop 5 Crack Growth in a Three-point Bend Specimen using VCCT • Lecture 8 Low-cycle Fatigue • Lecture 9 Mesh-independent Fracture Modeling (XFEM) • Workshop 6 Crack Growth in a Three-point Bend Specimen using XFEM Modeling Fracture and Failure with Abaqus Legal Notices The Abaqus Software described in this documentation is available only under license from Dassault Systèmes and its subsidiary and may be used or reproduced only in accordance with the terms of such license. This documentation and the software described in this documentation are subject to change without prior notice. Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any errors or omissions that may appear in this documentation. No part of this documentation may be reproduced or distributed in any form without prior written permission of Dassault Systèmes or its subsidiary. © Dassault Systèmes, 2009. Printed in the United States of America Abaqus, the 3DS logo, SIMULIA and CATIA are trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal Notices in the Abaqus 6.9 Release Notes and the notices at: http://www.simulia.com/products/products_legal.html. Modeling Fracture and Failure with Abaqus Revision Status Lecture 1 2/09 Updated for 6.9 Lecture 2 2/09 Updated for 6.9 Lecture 3 2/09 Updated for 6.9 Lecture 4 2/09 Updated for 6.9 Lecture 5 2/09 Updated for 6.9 Lecture 6 2/09 Updated for 6.9 Lecture 7 2/09 Updated for 6.9 Lecture 8 2/09 Updated for 6.9 Lecture 9 2/09 New for 6.9 Workshop 1 2/09 Updated for 6.9 Workshop 2 2/09 Updated for 6.9 Workshop 3 2/09 Updated for 6.9 Workshop 4 2/09 Updated for 6.9 Workshop 5 2/09 Updated for 6.9 Workshop 6 2/09 New for 6.9

                    本文档为【FRAC-L00-Title】，请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑，
                    图片更改请在作品中右键图片并更换，文字修改请直接点击文字进行修改，也可以新增和删除文档中的内容。 
 该文档来自用户分享，如有侵权行为请发邮件ishare@vip.sina.com联系网站客服，我们会及时删除。

                    [版权声明] 本站所有资料为用户分享产生，若发现您的权利被侵害，请联系客服邮件isharekefu@iask.cn，我们尽快处理。

                    本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权，请谨慎使用。

                    网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传，仅限个人学习分享使用，禁止用于任何广告和商用目的。
                

下载需要：免费已有0 人下载

立即下载

FRAC-L00-Title

你可能还喜欢