菲尼克斯端子样本

The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without having to give up such familiar quality features as the large insertion space. The outstanding feature of the feed-through terminals is their space-saving design, the generous labeling options and a flexible bridging system. The insertion space of the ST terminal blocks is designed in such a way that flexible conductors with the rated cross section with ferrule can also be wired up without difficulty. The ground terminal blocks with the same shape as the feed-through terminal blocks make contact via simple snapping on the mounting rail and thus take over the ground conductor function. The housings are made of unbreakable polyamide 6.6 of the inflammability class V0 acc. to UL 94. Marking A clear assignment of the connection lines is a pre- requisite for unambiguous and correct installation of terminal strips. The ST series is ideally suited to these requirements. The generous labeling option using ZB standard Zack ("quick") strip in the terminal center is always easily accessible and readily recognizable, even when wired. Moreover, each termination point can also be labeled for special applications. Plug-in bridging system FBS The ST terminal block has dual channels for handling all types of bridging possibilities. By means of plug-in bridges the chain bridging can be achieved either with a 2-pos. standard jumper or with multi-position bridges. The multi-position version is especially useful for fast bridging of multi-position terminal strips. The bridging between non-adjacent terminals can also be handled with this version. The plug-in bridges are Spring Cage Feed-Through Terminal Blocks ST Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com available in the number of position 2, 3, 4, 5 and 10. 20-pos. bridges can also be delivered for the 4, 5 and 6 mm terminal block pitches which can be cut to suit your requirements. There is also the possibility of a practical test connection in the bridge shaft of the terminal block. Generous wire entrance The ST series has large conductor openings, which eliminate the need to move up to a large terminal block when ferrules are required. Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 gray terminal width 4.2 blue terminal width 4.2 orange terminal width 4.2 red terminal width 4.2 black terminal width 4.2 ST 1,5 30 31 07 6 50 ST 1,5 BU 30 31 08 9 50 ST 1,5 OG 30 37 01 2 50 ST 1,5 RD 30 37 03 8 50 ST 1,5 BK 30 37 06 7 50 (1) End cover gray D-ST 2,5 30 30 41 7 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white 0.25-0.5 mm2 gray ISH 1,5/0,2 32 06 13 1 50 ISH 1,5/0,5 30 31 03 4 50 (3) Plug-in bridge, for 2-pos. cross-connections in the 3-pos. terminal center 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-4 Imax.: 17.5 A 30 30 11 6 50 FBS 3-4 17.5 A 30 30 12 9 50 FBS 4-4 17.5 A 30 30 13 2 50 FBS 5-4 17.5 A 30 30 14 5 50 FBS 10-4 17.5 A 30 30 15 8 10 FBS 20-4 17.5 A 30 30 35 2 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 4 30 30 72 1 50 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 (6) Modular test connector, for individual assembly of test connector strips, can be labeled with ZBF 4 PS-4 30 30 97 0 10 (7) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 1,5 30 30 95 8 10 (8) Screwdriver, for actuating the tension spring SZF 0 - 0,4 x 2,5 12 04 50 4 10 (9) Zack strip, flat, for labeling the outer marker grooves white ZBF 4:UNPRINTED 08 08 58 7 10 (10) Zack strip, 10-section, for labeling in the terminal center white ZB 4:UNPRINTED 08 05 00 1 10 Dimensions Width / length / end cover width [mm] 4.2 / 48.5 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] 17.5 / 1.5 Rated surge voltage / contamination class [kV] / – 6 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 1.5 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 1.5 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 1 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG – CSA/CUL: [V] / [A] / AWG – Feed-Through Terminal Block ST 1,5 Phoenix Contact page 2 of 15 (IEC) rigid flexible I U [mm2] solid stranded AWG [A] [V] IEC 60 947-7-1 0.08-1.5 0.08-1.5 28-16 17.5 500 EN 50 019* 0.08-1.5 0.08-1.5 28-16 17.5 420 * EC Prototype certificate no.: KEMA 01ATEX2129U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. u P F KEMA Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 green-yellow terminal width 4.2 ST 1,5-PE 30 31 51 3 50 (1) End cover gray D-ST 2,5 30 30 41 7 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white 0.25-0.5 mm2 gray ISH 1,5/0,2 32 06 13 1 50 ISH 1,5/0,5 30 31 03 4 50 (3) Screwdriver, for actuating the tension spring SZF 0 - 0,4 x 2,5 12 04 50 4 10 (4) Zack strip, flat, for labeling the outer marker grooves white ZBF 4:UNPRINTED 08 08 58 7 10 (5) Zack strip, 10-section, for labeling in the terminal center white ZB 4:UNPRINTED 08 05 00 1 10 Dimensions Width / length / end cover width [mm] 4.2 / 48.5 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] – Rated surge voltage / contamination class [kV] / – 6 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 1.5 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 1.5 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 1 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG – CSA/CUL: [V] / [A] / AWG – Ground Terminal Block ST 1,5-PE Phoenix Contact page 3 of 15 (IEC) rigid flexible [mm2] solid stranded AWG IEC 60 947-7-2 0.08-1.5 0.08-1.5 28-16 EN 50 019* 0.08-1.5 0.08-1.5 28-16 * EC Prototype certificate no.: KEMA 01ATEX2129U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. Observe the current carrying capacity of mounting rails. u P F KEMA Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 gray terminal width 5.2 blue terminal width 5.2 orange terminal width 5.2 red terminal width 5.2 black terminal width 5.2 ST 2,5 30 31 21 2 50 ST 2,5 BU 30 31 22 5 50 ST 2,5 OG 30 37 07 0 50 ST 2,5 RD 30 37 09 6 50 ST 2,5 BK 30 37 12 2 50 (1) End cover gray D-ST 2,5 30 30 41 7 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white 0.25-0.5 mm2 gray 0.75-1 mm2 black ISH 2,5/0,2 30 02 84 3 50 ISH 2,5/0,5 30 02 85 6 50 ISH 2,5/1 30 02 86 9 50 (3) Plug-in bridge, for 2-pos. cross-connections in the 3-pos. terminal center 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-5 Imax.: 24 A 30 30 16 1 50 FBS 3-5 24 A 30 30 17 4 50 FBS 4-5 24 A 30 30 18 7 50 FBS 5-5 24 A 30 30 19 0 50 FBS 10-5 24 A 30 30 21 3 10 FBS 20-5 24 A 30 30 22 6 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 4 30 30 72 1 50 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 (6) 2.3 mm ∅ test connector1), consisting of metal part and red insulating sleeve (7) Modular test connector, can be labeled with ZBF 5 MPS-RD 02 01 55 3 10 PS 5 30 30 98 3 10 (8) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 2,5 30 30 94 1 10 (9) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 (10) Zack strip, flat, for labeling the outer marker grooves white ZBF 5 :UNPRINTED 08 08 64 2 10 (11) Zack strip, 10-section, for labeling in the terminal center white ZB 5:UNPRINTED 10 50 00 4 10 Dimensions Width / length / end cover width [mm] 5.2 / 48.5 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] 31 / 4 Rated surge voltage / contamination class [kV] / – 8 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 2.5 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 2.5 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 3 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG 600 / 20 / 26 - 12 CSA/CUL: [V] / [A] / AWG 600 / 20 / 26 - 12 Feed-Through Terminal Block ST 2,5 Phoenix Contact page 4 of 15 (IEC) rigid flexible I U [mm2] solid stranded AWG [A] [V] IEC 60 947-7-1 0.08-4 0.08-2.5 28-12 31 800 EN 50 019* 0.08-4 0.08-2.5 28-12 25/21 550 * EC Prototype certificate no.: KEMA 00ATEX2052U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. u P F KEMA 1) Further colors on request. Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 green-yellow terminal width 5.2 ST 2,5-PE 30 31 23 8 50 (1) End cover gray D-ST 2,5 30 30 41 7 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.08-0.2 mm2 white 0.25-0.5 mm2 gray 0.75-1 mm2 black ISH 2,5/0,2 30 02 84 3 50 ISH 2,5/0,5 30 02 85 6 50 ISH 2,5/1 30 02 86 9 50 (3) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 (4) Zack strip, flat, for labeling the outer marker grooves white ZBF 5 :UNPRINTED 08 08 64 2 10 (5) Zack strip, 10-section, for labeling in the terminal center white ZB 5:UNPRINTED 10 50 00 4 10 Dimensions Width / length / end cover width [mm] 5.2 / 48.5 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] – Rated surge voltage / contamination class [kV] / – 8 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 2.5 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 2.5 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 3 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG – / – / 26 - 12 CSA/CUL: [V] / [A] / AWG – / – / 26 - 12 Ground Terminal Block ST 2,5-PE Phoenix Contact page 5 of 15 (IEC) rigid flexible [mm2] solid stranded AWG IEC 60 947-7-2 0.08-4 0.08-2.5 28-12 EN 50 019* 0.08-4 0.08-2.5 28-12 * EC Prototype certificate no.: KEMA 00ATEX2052U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. Observe the current carrying capacity of mounting rails. u P F KEMA Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 gray terminal width 6.2 blue terminal width 6.2 orange terminal width 6.2 red terminal width 6.2 black terminal width 6.2 ST 4 30 31 36 4 50 ST 4 BU 30 31 37 7 50 ST 4 OG 30 37 13 5 50 ST 4 RD 30 37 15 1 50 ST 4 BK 30 37 18 0 50 (1) End cover gray D-ST 4 30 30 42 0 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.25-0.5 mm2 gray 0.75-1 mm2 black ISH 4/0,5 30 02 88 5 50 ISH 4/1 30 02 89 8 50 (3) Plug-in bridge, for 2-pos. cross-connections in the 3-pos. terminal center 4-pos. 5-pos. 10-pos. 20-pos. FBS 2-6 Imax.: 32 A 30 30 33 6 50 FBS 3-6 32 A 30 30 24 2 50 FBS 4-6 32 A 30 30 25 5 50 FBS 5-6 32 A 30 30 34 9 50 FBS 10-6 32 A 30 30 27 1 10 FBS 20-6 32 A 30 30 36 5 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 4 30 30 72 1 50 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 (6) 2.3 mm ∅ test connector1), consisting of metal part and red insulating sleeve (7) Modular test connector, can be labeled with ZBF 6 MPS-RD 02 01 55 3 10 PS-6 30 30 99 6 10 (8) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 4 30 30 95 4 10 (9) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 (10) Zack strip, flat, for labeling the outer marker grooves white ZBF 6:UNPRINTED 08 08 71 0 10 (11) Zack strip, 10-section, for labeling in the terminal center white ZB 6:UNPRINTED 10 51 00 3 10 Dimensions Width / length / end cover width [mm] 6.2 / 56 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] 40 / 6 Rated surge voltage / contamination class [kV] / – 8 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 4 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 4 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 - 1 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 4 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG 600 / 30 / 20 - 10 CSA/CUL: [V] / [A] / AWG 600 / 30 / 20 - 10 Feed-Through Terminal Block ST 4 Phoenix Contact page 6 of 15 (IEC) rigid flexible I U [mm2] solid stranded AWG [A] [V] IEC 60 947-7-1 0.08-6 0.08-4 28-10 40 800 EN 50 019* 0.08-6 0.08-4 28-10 34/30 550 * EC Prototype certificate no.: KEMA 00ATEX2129U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. u P F KEMA 1) Further colors on request. Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 green-yellow terminal width 6.2 ST 4-PE 30 31 38 0 50 (1) End cover gray D-ST 4 30 30 42 0 50 (2) Insulating stop sleeve, prevents unintentional clamping of the insulation in the case of smaller cross sections Cross section range: 0.25-0.5 mm2 gray 0.75-1 mm2 black ISH 4/0,5 30 02 88 5 50 ISH 4/1 30 02 89 8 50 (3) Screwdriver, for actuating the tension spring SZF 1 - 0,6 x 3,5 12 04 51 7 10 (4) Zack strip, flat, for labeling the outer marker grooves white ZBF 6:UNPRINTED 08 08 71 0 10 (5) Zack strip, 10-section, for labeling in the terminal center white ZB 6:UNPRINTED 10 51 00 3 10 Dimensions Width / length / end cover width [mm] 6.2 / 56 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 36.5 / 44 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] – Rated surge voltage / contamination class [kV] / – 8 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 4 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 4 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 - 1 Stripping length [mm] 10 Internal cylindrical gauge (IEC 60 947-1) A 4 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG – / – / 20 - 10 CSA/CUL: [V] / [A] / AWG – / – / 20 - 10 Ground Terminal Block ST 4-PE Phoenix Contact page 7 of 15 (IEC) rigid flexible [mm2] solid stranded AWG IEC 60 947-7-2 0.08-6 0.08-4 28-10 EN 50 019* 0.08-6 0.08-4 28-10 * EC Prototype certificate no.: KEMA 00ATEX2129U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. Observe the current carrying capacity of mounting rails. u P F KEMA Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 gray terminal width 8.2 blue terminal width 8.2 ST 6 30 31 48 7 50 ST 6 BU 30 31 49 0 50 (1) End cover gray D-ST 6 30 30 43 3 50 (2) Plug-in bridge, for 2-pos. cross-connections in the 3-pos. terminal center 4-pos. 5-pos. 10-pos. FBS 2-8 Imax.: 41 A 30 30 28 4 10 FBS 3-8 41 A 30 30 29 7 10 FBS 4-8 41 A 30 30 30 7 10 FBS 5-8 41 A 30 30 31 0 10 FBS 10-8 41 A 30 30 32 3 10 (3) Reducing bridge, for connection of one ST 6 with ST 2,5 or ST 4 RB ST 6-(2,5/4) Imax.: 48 A 30 30 86 0 10 (4) Partition plate, for visual and electrical separation of terminal groups, 2 mm thick ATP-ST 6 30 24 48 1 50 (5) Test adapter, for 4 mm ∅ test connector PS and 4 mm ∅ safety test connectors, making contact in the bridge shaft PAI 4 30 30 92 5 10 (6) 2.3 mm ∅ test connector1), consisting of metal part and red insulating sleeve (7) Modular test connector, can be labeled with ZBF 8 MPS-RD 02 01 55 3 10 PS 8 30 31 00 5 10 (8) Warning cover, for the operating shafts of the “mini-spring” ST spring cage terminal blocks WST 6 30 30 96 7 10 (9) Screwdriver, for actuating the tension spring SZF 2 - 0,8 x 4,0 12 04 52 0 10 (10) Zack marker sheet, flat, for labeling the outer marker grooves white ZBF 8:UNPRINTED 08 08 78 1 10 (11) Zack strip, 10-section, for labeling in the terminal center white ZB 8:UNPRINTED 10 52 00 2 10 Dimensions Width / length / end cover width [mm] 8.2 / 69.5 / 2.2 Height (NS 35/7.5 / NS 35/15) [mm] 43.5 / 51 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section [A] / [mm2] 52 / 10 Rated surge voltage / contamination class [kV] / – 8 / 3 Surge voltage category / insulation material group – / – III / I Connection capacity Stranded with ferrule with plastic sleeve [mm2] 0.25 - 6 Stranded with ferrule without plastic sleeve [mm2] 0.25 - 6 Stranded with TWIN ferrule with plastic sleeve [mm2] 0.5 - 1.5 Stripping length [mm] 12 Internal cylindrical gauge (IEC 60 947-1) A 5 Insulating material PA Inflammability class in acc. with UL 94 V0 Approval data (UL and CSA/CUL) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG 600 / 50 / 20 - 8 CSA/CUL: [V] / [A] / AWG 600 / 50 / 20 - 8 Feed-Through Terminal Block ST 6 Phoenix Contact page 8 of 15 (IEC) rigid flexible I U [mm2] solid stranded AWG [A] [V] IEC 60 947-7-1 0.2-10 0.2-6 24-8 52 800 EN 50 019* 0.2-10 0.2-6 24-8 45/36 550 * EC Prototype certificate no: KEMA 00ATEX2129U For information on installation and usage of accessories for EEx e applications, see www.clipline.phoenixcontact.com. u P F KEMA 1) Further colors on request. Technical data Type Order No. Pcs. Pkt. Spring cage terminal block, for mounting on 3 green-yellow terminal width 8.2 ST 6-PE 30 31 50 0 50 (1) End cover gray D-ST 6 30 30 43 3 50 (2)