网络-网卡MAC地址修改与恢复不完全手册

网络-网卡MAC地址修改与恢复不完全手册 Network card MAC address modification and restore incomplete manual The first thing to say is that not all Network CARDS are in the Network card attribute - there is a Network Address, especially a laptop! In addition, since there is no Network Address in your Network card properties, there is no such thing in the registry, so only by modifying the registry to display it! One, Win 2000 / XP changes the MAC address 1. In "the HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control/Class / 4 d36e972 - E325 ce - BFC1-08002-11 be10318\0000, 0001, 0002," such as the primary key, because you may have installed more than one piece of card, so there may be multiple under the primary key is similar to "0000, 0001," the primary key, then you can find DriverDesc content for you to modify the description of the network card of primary keys, such as "0001". Under the primary key mentioned above, add a string, name "NetworkAddress", and set its value to the MAC address you want, and write continuously, such as "00101010101010". 3. And then to the primary key "Ndi \ params" to add a "NetworkAddress" primary key value, under the primary key to add strings, named "default" values to write the original MAC address, to write in a row, such as "001010101010". 【 note 】 in fact it's just set up behind the advanced properties mentioned in the "initial value", the MAC address of actual use depends on the NetworkAddress parameters mentioned in point 2, and once set, advanced properties after the median is the value of "NetworkAddress" given rather than the "default". 4. Under the primary key of the NetworkAddress continue adding called "ParamDesc" string, its role is specified "NetworkAddress" the description of the primary key, its value can be "Network Address" (also can be arbitrarily set, this is just a description, it doesn't matter, this value will be directly after you modify the MAC Address of time appear as described), such after restarting a open Network neighborhood properties, double click on the corresponding card will be found to have an advanced Settings, it is the Network Address (that is, you set the ParamDesc) in front of option, this is you in the second step in the registry to add new item "NetworkAddress", as long as after this change MAC Address is ok. (you can also change the MAC back here) 5. Under the primary key of the NetworkAddress continue adding string called "Optional", its value is set to "1", is on the basis of the previous step to indicate "does not exist" this option! (this step is not understand if you look at the card advanced properties, others do not do this step it doesn't matter) after you have this step to change back directly select the "no" is ok! Close the registry editor, restart the network card or system, and your network card address has been changed. Open the properties of the Network neighbor and double-click the corresponding Network card entry to find the advanced Settings item for the Network Address. The MAC can be changed at any time without the need to restart the MAC address directly. 2000 / XP is like this: Two, Win 98 changes the MAC address The method is similar to 2000 / XP, except where the changes are made! 1. In "the HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Class,.net, 0000, 0001, 0002," such as the primary key, because you may have installed more than one piece of card, so there may be multiple under the primary key is similar to "0000, 0001," the primary key, then you can find DriverDesc content for you to modify the description of the network card of primary keys, such as "0001". Add a string to the primary key mentioned above, Name "NetworkAddress", set its value to the MAC address you want, and write continuously, such as "00101010101010". 3. And then to the primary key "Ndi \ params" to add a "NetworkAddress" primary key value, under the primary key to add strings, named "default" values to write the original MAC address, to write in a row, such as "001010101010". 【 note 】 in fact it's just set up behind the advanced properties mentioned in the "initial value", the MAC address of actual use depends on the NetworkAddress parameters mentioned in point 2, and once set, advanced properties after the median is the value of "NetworkAddress" given rather than the "default". 4. Under the primary key of the NetworkAddress continue adding called "ParamDesc" string, its role is specified "NetworkAddress" the description of the primary key, its value can be "Network Address" (also can be arbitrarily set, this is just a description, it doesn't matter, this value will be directly after you modify the MAC Address of time appear as described), such after restarting a open Network neighborhood properties, double click on the corresponding card will be found to have an advanced Settings, it is the Network Address (that is, you set the ParamDesc) in front of option, this is you in the second step in the registry to add new item "NetworkAddress", as long as after this change MAC Address is ok. (you can also change the MAC back here) 5. Under the primary key of the NetworkAddress continue adding string called "Optional", its value is set to "1", is on the basis of the previous step to indicate "no show" this option! (this step is not understand if you look at the card advanced properties, others do not do this step it doesn't matter) after you have this step to change back directly select the "no show" is ok! Close the registry editor, restart the network card or system, and your network card address has been changed. Open the properties of the Network neighbor and double-click the corresponding Network card entry to find the advanced Settings item for the Network Address. The MAC can be changed at any time without the need to restart the MAC address directly. This is what it looks like: Change the MAC address under Linux (though not many people use the system, but say it!). First, you must turn off the network card device, otherwise you will report the system too busy to change. The command is: "/ sbin/ifconfig eth0 down" Modify the MAC address, which is easier than changing Windows. The command is: "/ sbin/ifconfig eth0 hw ether 00 AA BB CC DD EE" Restart the network card. The command is that the MAC address of the "/ sbin/ifconfig eth0 up" network is complete. Four, if you don't think you change the registry is too trouble that I'm here to provide two registry files (content) between every two option, hold yourself to a text file, and save as. Reg file. Double-click the.reg file to import the registry! Under the 2000 / XP: The Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Class \ 4d36e972-e329-bfc1-08002BE10318\0000] "NetWorkAddress" = "112233445566" [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Class \ Class \ 4d36e972-e329-bfc1-08002BE10318\0000 \ Ndi \ Params \ networkaddress] "Default" = "665544332211" "Optional" = "1" "Paramdesc" = "NetWork Address" [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Class \ Class \ 4d36e972-e329-bfc1-08002BE10318\0000 \ Ndi \ Params \ networkaddress] "Default" = "665544332211" "Optional" = "1" "Paramdesc" = "NetWork Address" Under the 98: REGEDIT4 [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Class \ 0000] "NetWorkAddress" = "112233445566" [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Class \ 0000 \ Ndi \ Params \ networkaddress] "Default" = "665544332211" "Optional" = "1" "Paramdesc" = "NetWork Address" [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Class \ 0000 \ Ndi \ Params \ networkaddress] "Default" = "665544332211" "Optional" = "1" "Paramdesc" = "NetWork Address" Change all the 112233445566 from the two texts to the MAC address you want, and change all the 665544332211 to your original MAC address! It should be noted that there is must be sure your card at the registration table is "0000", or "0001" and other, and then corresponding changes in this Reg file to execute the import operation. Otherwise it will only be a waste of effort. How does the network card physical address change how to return original In the control panel the attributes of a computer hardware device manager Find the card right attribute Senior there is a network address point does not exist is the original own MAC Attached: simple modification of MAC address You can right-click on the "on-line neighbor" icon on the desktop, choose "properties", "Network connections" in the pop-up dialog box, right-click on the "local connection" icon, and select "properties", will pop up a "local connection properties" dialog box, click the "configure" button, select "advanced" and select "attributes" in the left-hand column "Network Address" (actually, not all of the Network card, description of the physical Address in the "Network Address", such as the Intel nic with the Locally Administered Address "to describe, as long as the" value "can be found in the box on the right hand column that this option is ok), and then select the right column" value "of the box above a radio (not" no "), at this point can be input in the right box to change the Network card MAC Address, forms such as "000 b5af6f4f1". Click ok, and the change is done.