Applications
� Heavy Construction,
Grading
� Ship & Barge Leveling
� Deviation Surveys
� Continuous Casting
� Weapons Platform Leveling
LSO
Inclinometer
LSO Inclinometer Specifications
Performance
Input Range,°: ±1 ±3 ±14.5 ±30 ±90
Full Range Output (FRO), VDC ±1%1: ±5.0 ±5.0 ±5.0 ±5.0 ±5.0
Nonlinearity, % FRO2, maximum: 0.05 0.05 0.02 0.02 0.05
Scale Factor, volts/g nominal: 286.5 95.5 20.0 10.0 5.0
Scale Factor Temp Sensitivity, PPM/°C, maximum: 400 300 100 60 60
Natural Frequency, Hz, nominal3: 0.5 2.0 15.0 20.0 40.0
Bandwidth (-3db), Hz, nominal: 0.5 2.0 15.0 20.0 40.0
Input-Axis Misalignment, °, maximum 0.1 0.15 0.25 0.5 1.0
Output at 0° Tilt, volts, maximum: 0.1 0.04 0.02 0.02 0.02
0°Output Temp Sensitivity, volts/°C, maximum: 0.005 0.003 0.001 0.0005 0.0003
Resolution and Threshold: 1µradian
Electrical
Input Voltage, VDC 4: ±12 to ±18
Input Current, mA, nominal: ±15
Output Impedance, ohms, nominal: 100
Noise, Vrms, maximum: 0.002
Environmental
Operating Temp Range: -18° C to +71° C
Survival Temp Range: -40° C to +71° C
Vibration: 20 grms
Shock: 1500g, 0.5 msec, 1/2 sine
Seal: MIL-STD 202, Method 112
Weight: 13.0 oz.
1 Full Range is defined “from negative full input angle to positive full input angle.”
2 Nonlinearity is specified as deviation of output referenced to theoretical sine function value, independent of misalignment.
3 Output Phase angle = -90°.
4 Unit Power connections can be easily adapted for operations from single-ended, floating power supplies of 24 to 36 Volts DC.
The JEWELL LSO Series is our most rugged general-purpose
inclinometer. Our Jewell LSO inertial sensors meet the needs
of a variety of commercial and industrial applications. They offer
precise readings with high outputs at lower range frequencies.
We machine each housing from solid aluminum making the LSO
ideal for “all weather” applications.
陕西航天长城测控有限公司 www.tuoluoyi.comTel:029-82501390 82501710 Fax:029-82501150
Output Amplifier
Block Diagram for the LSO Inclinometer
Servo
Amplifier
Torquer
Load Network
Mass
Gain
Network
Dimensional Drawing for the LSO Inclinometer (inch/mm)
Position
Detector
.75
19.05
.22
5.59
Model LSOP:
Solder Pin Type Termination
C
B
A
F
E
D
1.60
40.64
3.64
92.46
Sensitive Axis
.75
19.05
2.94
74.68
.35
8.89
.18
4.57
Mates with
PTO6A 10-6S
2 Holes Dia.
Typical
CL
1.70
43.18
.23
5.84
3.29
83.57
0.01
0.25
.18
4.57
Model LSOC-Connector Type Termination
4.7K Ω
(A) +12 to +18VDC
(B) Power/Signal Com.
(C) -12 to -18VDC
Pin-Out
(D) E0 (volts/g)
(E) Self Test Return
(F) Self Test Hi
LSO Inclinometer
陕西航天长城测控有限公司 www.tuoluoyi.comTel:029-82501390 82501710 Fax:029-82501150
本文档为【LSO系列伺服倾角传感器】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。