WIFI模块 RS9110-N-11-28

RS9110-N-11-28: 802.11ABGN SELF-CONTAINED MODULE WITH NETWORKING STACK The RS9110-N-11-28 module from Redpine's Connect-io-n™ family of products is a complete dual band (2.4/5GHz) IEEE 802.11abgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, Baseband processor, dual band RF transceiver with power amplifier and diplexer; and all WLAN protocol functionality, networking stack in embedded firmware to make a dual band 802.11n WLAN solution for a variety of applications. No WLAN or networking func- tionality is required on the host system or data source. Based on Redpine Signals' RS9110 SoC that includes an embedded processor, it is designed to provide standards compliant wireless connectivity in Open and secure modes to devices and systems such as industrial equipment, medical electronic systems, POS equipment, sensor networks and metering equipment, M2M communications, and remote configuration applications. As a wireless serial modem, the RS9110-N-11-28 originates and terminates TCP and UDP connections, enabling a variety of M2M applications at low cost and small footprint. It uniquely provides connectivity in the single stream 802.11n mode, preserving overall network throughput in the emerging enterprise environments. Features R S 9 1 1 0 - N - 1 1 - 2 8 P R O D U C T B R I E F R S 91 10 -N -1 1- 28 �� Compliant to 802.11a/b/g and single stream 802.11n �� 2.4/5 GHz, 802.11n RF transceiver with power amplifier �� Highly integrated 2.4 GHz/5 GHz transceiver with direct conversion architecture �� Fully self-contained serial-to-wireless functionality - does not require any host processor bandwidth �� Includes all the protocol and configuration functions required for WLAN connectivity in Open, WEP and WPA/WPA2-PSK modes of operation �� Payload data through Serial Interface and SPI �� Terminates TCP and UDP connections, and offers transparent serial modem functionality �� Configuration through AT commands and SPI frames �� Ultra low power operation with power save modes �� Ad-hoc and infrastructure modes for maximum deployment flexibility �� Single supply 3.1 to 3.6 V operation Applications �� Seamless Wi-Fi connectivity for any equipment with a serial or SPI interface �� Industrial M2M communications �� Point of Sale Terminals �� Metering �� Security Cameras & Surveillance Equipment �� Warehousing �� Digital Picture Frames �� Logistics and Freight Management �� Several Medical Applications including Patient Monitoring, Remote Diagnostics etc. ????：?????????? 0755 - 8376 5592 northelec.taobao.com Specifications Network Standard Support IEEE 802.11a/b/g/n/i Data Rates 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps Frequency Band 2.412 - 2.484 GHz (Low Band) 4.900 - 5.850 GHz (High band) Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, and 64-QAM 802.11b with CCK and DSSS Wireless Security 802.11i: AES, TKIP, WEP, WPA and WPA2 Host Interfaces SPI, UART NetworkProtocols TCP, UDP, IPv4, ARP, ICMP, DHCP Client WLAN Functions Power save modes, automatic roaming, auto-rate Ad-hoc and Infrastructure modes Supported UART baud rates Supports standard baud rates from 9600bps to 3.6Mbps Configuration AT commands (for UART) Operating Temperature Industrial Grade -40ºC to +85ºC Supply Voltage 3.1 - 3.6 V Dimensions 20 mm x 17.5 mm Evaluation Package Redpine Signals provides a comprehensive evalua- tion package that includes a board with the module mounted on it, along with standard serial connector, UART level shifters, frequency reference, antenna and 5 V power supply connection. It also includes a Windows XP GUI based configuration utility and software upgrade capability, along with detailed documentation. RS9110-N-11-28 DIAGRAM Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Expanding Wireless Horizons and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. © Copyright 2008 Redpine Signals, Inc. All Rights Reserved For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. • 2107 North First Street • Suite 680 • San Jose, CA 95131 Phone: +1408 748 3385 • Email: sales@redpinesignals.com www.redpinesignals.com ????：?????????? 0755 - 8376 5592 northelec.taobao.com