Courtyard 370 Specs - Overhead Door
SECTION 08361
RESIDENTIAL OVERHEAD DOORS ? INSULATED STEEL DOORS - 370 SERIES COURTYARD COLLECTION
Display hidden notes to specifier by using ‘Tools’/‘Options’/‘View’/‘Hidden Text’. On newer versions of Microsoft Word click on round Windows logo in top left corner, Click on ‘Word Options’ button at bottom of drop down menu. Click on ‘Display’ on left menu bar, and check the box for ‘Hidden Text’.
PART 1 GENERAL
1.1 SECTION INCLUDES: Residential Metal Overhead Doors.
1.2 RELATED SECTIONS
A. Section 03300 - Cast-In-Place Concrete: Prepared opening in concrete. Execution
requirements for placement of anchors in concrete wall construction.
B. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry. Execution
requirements for placement of anchors in masonry wall construction.
C. Section 05500 - Metal Fabrications: Steel frame and supports.
D. Section 06100 - Wood Blocking and Curbing: Rough wood framing and blocking for
door opening.
E. Section 07900 - Joint Sealers: Perimeter sealant and backup materials.
F. Section 08710 - Door Hardware: Cylinder locks.
G. Section 09900 - Paints and Coatings: Field painting.
H. Section 16130 - Raceway and Boxes: Empty conduit from control station to door
operator.
I. Section 16150 - Wiring Connections: Electrical service to door operator.
1.3 REFERENCES
A. ANSI/DASMA 108 - Standard Method for Testing Sectional Garage Doors and Rolling
Doors: Determination of Structural Performance Under Uniform Static Air Pressure
Difference
B. UL: Underwriters Laboratories, Inc.
?08361-Courtyard Collection 370 Series -1
C. ULC: Underwriters Laboratories of Canada.
1.4 DESIGN / PERFORMANCE REQUIREMENTS
A. Wind Loads: Design and size components to withstand loads caused by pressure and
suction of wind acting normal to plane of wall as calculated in accordance with
applicable code.
1. Design pressure of ________ lb/sq ft (________kPa).
B. Wiring Connections: Requirements for electrical characteristics.
1. 115 volts, single phase, 60 Hz.
C. Products Requiring Electrical Connection: Listed and classified by Underwriters
Laboratories, Inc. acceptable to authority having jurisdiction as suitable for purpose
specified.
D. Single-Source Responsibility: Provide doors, tracks, motors, and accessories from
one manufacturer for each type of door. Provide secondary components from source
acceptable to manufacturer of primary components.
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Shop Drawings: Indicate plans and elevations including opening dimensions and
required tolerances, connection details, anchorage spacing, hardware locations, and
installation details.
D. Selection Samples: For each finish product specified, two complete sets of color
chips representing manufacturer's full range of available colors and patterns.
E. Verification Samples: For each finish product specified, two samples, minimum size 6
inches (150 mm) square, representing actual product, color, and patterns.
F. Manufacturer's Certificates: Certify products meet or exceed specified requirements.
G. Operation and Maintenance Data.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: Company specializing in manufacturing products
specified in this section with minimum five years documented experience.
B. Installer Qualifications: Authorized representative of the manufacturer with minimum
five years documented experience.
C. Products Requiring Electrical Connection: Listed and classified by Underwriters
Laboratories, Inc. acceptable to authority having jurisdiction as suitable for purpose
specified.
1.7 DELIVERY, STORAGE, AND HANDLING
?08361-Courtyard Collection 370 Series -2
A. Store products in manufacturer's unopened labeled packaging until ready for
installation.
B. Protect materials from exposure to moisture until ready for installation.
C. Store materials in a dry, ventilated weathertight location.
D. Store and dispose of solvent-based materials, and materials used with solvent-based
materials, in accordance with requirements of local authorities having jurisdiction.
1.8 WARRANTY
A. Courtyard Collection 370 Series. Warranty: 20 year limited against splitting and
cracking, 5 year against delamination of polyurethane foam from steel face and all
other components for 1 year.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Overhead Door Corp., 2501 S. State Hwy. 121 Bus., Suite
200, Lewisville, TX 75067. ASD. Tel. Toll Free: (800) 929-3667. Phone: (469)
549-7100. Fax: (972) 906-1499. Web Site: www.overheaddoor.com. E-mail:
info@overheaddoor.com.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section
01600.
2.2 RESIDENTIAL METAL OVERHEAD DOORS
A. Insulated Steel Sectional Overhead Doors: Courtyard Collection 370 Series Insulated
Steel Doors by Overhead Door Corporation.
1. Door Assembly: Rigid steel fully insulated construction with a metal foam metal
sandwich panel. Fabricated with EPDM seals between sections.
a. Size/Design: As indicated on the Drawings.
b. Panel Thickness: 1 inches (25 mm) nominal.
c. Panel Style: Ship lap panels.
1) Contemporary Flush Panel 298 Series.
d. Exterior Steel: .012 inch (0.30 mm) nominal, high strength hot-dipped
galvanized with an embossed wood grain texture.
e. Insulation: CFC-free foamed in place polyurethane.
f. Thermal Values: R-value of 9.31.
g. Windload Design: Provide to meet the Design/Performance
requirements specified.
h. Window Design:
1) Window Location:
(a) Top section.
(b) Second from top section.
2) Decorative Window Style:
(a) Full Vision (Long panel).
(b) Stockbridge.
(c) Stockton.
?08361-Courtyard Collection 370 Series -3
(d) Stockton Arch.
(e) Somerton.
(f) Wynbridge Arch.
3) Glass Type:
(a) Glass: Clear.
(b) Glass: Obscure (frosted). 2. Finish/Color: Two coat baked-on polyester. Trim, window frame, window insert
is available in white only.
a. Almond.
b. Brown.
c. Hunter Green.
d. Sandstone.
e. Terra Bronze.
f. White.
g. Desert Tan.
3. Premium Hardware:
a. Bean Design Handle.
b. Hammered Iron Handle.
c. Iron Studs.
d. Spade Design Hinge.
e. Traditional Hammertone Handle.
f. Traditional Hammertone Hinge
4. Value Hardware:
a. Bean Hinge 16 inch.
b. Large Bean Handle.
c. Large Spear Handle.
d. Small Spear Handle.
e. Spear Hinge 16 inch.
f. Spear Hinge 18 inch.
5. Lock:
a. Interior mounted slide lock.
b. Optional keyed lock.
6. Bottom fixture: DASMA 103 red-head fasteners. 7. Weatherstripping: Co-extruded EPDM bulb-type strip at bottom.
8. Heavy Duty Track: Provide track as recommended by manufacturer to suit
loading required and clearances available. 9. Nylon rollers.
10. Manual Operation.
11. Electric Openers.
PART 3 EXECUTION
3.1 EXAMINATION
A. Do not begin installation until openings and substrates have been properly prepared.
B. Verify wall openings are ready to receive work and opening dimensions and
tolerances are within specified limits.
C. Verify electric power is available and of correct characteristics.
D. If preparation is the responsibility of another installer, notify Architect of unsatisfactory
preparation before proceeding.
3.2 PREPARATION
?08361-Courtyard Collection 370 Series -4
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving
the best result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install overhead doors, track and openers in accordance with approved shop
drawings and the manufacturer's printed instructions.
B. Coordinate installation with adjacent work to ensure proper clearances and allow for
maintenance.
C. Anchor assembly to wall construction and building framing without distortion or stress.
D. Securely brace door tracks suspended from structure. Secure tracks to structural
members only.
E. Fit and align door assembly including hardware.
F. Coordinate installation of electrical service with Section 16150.
3.4 CLEANING AND ADJUSTING
A. Adjust door assembly to smooth operation and in full contact with weatherstripping.
B. Clean doors, frames and glass.
C. Remove temporary labels and visible markings.
3.5 PROTECTION
A. Do not permit construction traffic through overhead door openings after adjustment
and cleaning.
B. Protect installed products until completion of project.
C. Touch-up, damaged coatings and finishes and repair minor damage before
Substantial Completion.
END OF SECTION
?08361-Courtyard Collection 370 Series -5
本文档为【Courtyard 370 Specs - Overhead Door】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。