钢厂设备英文说明收集[整理]

钢厂设备英文说明收集[整理] 项目名称:冷轧硅钢涂层检验设备招标预告 业主近期拟公开招标采购下列项目的设备，现邀请合格投标人参加投标。 可以按分项目单独投标，或整个项目完整投标。 项目一、高压反应釜 1台 技术要求: 1.材质; 不锈钢 2.结构: 开环密封 3.容量: 1L 4.工作温度: 室温~300? 5.工作压力: 0-50bar 6.冷却方式: 自动 7.安全方式: 自动安全防爆阀 8.搅拌要求: 电磁搅拌,双排搅拌浆,搅拌输出功率显示 9.控制要求: 压力、温度、转速在线测试并数字显示，冷却、加热、搅拌转速自动控制 10(其它: 要求带通入和排放气体口，取样口 11. 电源: 220V或380V High pressure reactor 1set Technical requisition 1. Material: Stainless steel 2. Structure: pressurizing in open loop style 3. Content: 1L 4. Working temperature: room-temperature~300? 5. Working pressure: 0-50bar 6. Cooling method: automatic 7. Safety method: automatic safety explosion valve 8. Milling requisition 9. Controlling requisition: The pressure, temperature and rotating speed are tested on line and display in digital, cooling, heating up and rotating speed are controlled automatically. 10( Others: with air inlet, exhaust port and sampling meatus. 11. Power supply: 220V / 380V 项目二、稳定性 分析 定性数据统计分析pdf销售业绩分析模板建筑结构震害分析销售进度分析表京东商城竞争战略分析 仪 1台 技术要求 1、检测浓度范围:5%-95% 2、检测粒径范围:0.05-1000,m 3、重复性:?0.1% 4、电源: 220V或380V stability analyzer 1set Technical requisition: 1、detect scope of thickness: 5%-95% 2、detect scope of particle: 0.05-1000,m 3、repeatability: ?0.1% 4、power supply: 220V/ 380V 项目三、磨耗仪 1套 技术要求 1(工作电压:220V-50HZ (磨轮材质:通过试验确定 2 3. 电源: 220V或380V(50HZ) Abrader 1set Technical requisition: 1.Working voltage: 220V-50HZ 2.The material of grinding wheel: confirmed by test. 3. Power supply: 220V /380V.(50Hz) 项目四、循环腐蚀箱 1套 技术要求 1.腐蚀试验箱体积: 600L 2.试样容量: 70mm*150mm共160块 3.工作电压: 220V*50HZ 4.盐雾温度: 室温---60? 5.干燥温度: 室温---70? 6.湿热温度: 室温---60? 7.温度波动: 小于?0.5? 8.温度均匀度: 小于?1? 9.喷雾沉降率: 100mm直径漏斗4,8ml/时 10.结构要求: 带观察窗和内置照明 11.其它要求: 温度、相对湿度数字显示，循环腐蚀程序控制 12.压缩机要求: 压缩空气量3.5立方尺/分，在3-9巴压力和3/8"管条件下 13.不锈钢蒸馏水器 产水量40L/h，3/8"管道(9.5mm) 14.刻划刀 带0.5mm碳合金刀片,用于涂膜腐蚀试验中 cyclic corrosion cabinet 1set Technical requisition: 1. Volume of the equipment: 600L 2. Volume of sample: 70mm*150mm, 160 pieces. 3. Voltage: 220V*50HZ 4. temperature of salt spray: interior temperature?60? 5. Dry temperature: interior temperature---70? 6. Moisture heat temperature: interior temperature?60? 7.Fluctuation of temperature: less than ?0.5?. 8 Homogenization degree of temperature: less than ?1?. 9 Settling rate of atomization: 4~8ml/hour in the filler of 100mm diameter. 10 Requirement for the structure: with observation window and inner lighting. 11 Other requisition: displayer of temperature and relative humidity, controlling system for cyclic corrosion. 12 Requisition of compressor: rate of compressing air should be 3.5 cubic foot/min, in the condition of stress 3~9Pa and 3/8" diameter tube. 13 Stainless distillation water maker : production efficiency should be 40L/h at least, 3/8 diameter tube.(9.5mm). 14 Scoring reamer: with carbon alloy blade used for corrosion experiment for paint film. 项目五、涂层涂布设备 1套，包含: 1.手动高精度涂膜机 1台: 技术要求 1) 涂层控制原理:通过不锈钢辊或陶瓷辊 表 关于同志近三年现实表现材料材料类招标技术评分表图表与交易pdf视力表打印pdf用图表说话 pdf 面的刻槽深度不同，和与胶辊间的压力微调， 使不锈钢与胶辊间露下涂液量不同，从而达到了涂层厚度的精确控制。 2) 厚度范围: 0.5---3,m 3) 控制精度: ?0.3,m 4) 厚度可调性: 0--1,m 2.电动涂膜机 1台: 技术要求 1) 涂层控制原理:通过不锈钢(高铬辊)表面的刻槽深度不同,使不锈钢与胶辊间露下涂液量 不同,从而达到了涂层厚度的控制的目的。 2) 厚度范围: 3-10,m 3) 控制精度: ?0.5,m 4) 工作电源 220V或380V(50HZ) Equipment for coating 1set, included: 1、Manually operated high-precision coater 1set Technical requisition. 1)The controlling theory of coating: with the different deepness of the carved fillet between stainless steel roller and the China ware roller, and the pressure trimming of the robber roller to make different quantity of paint from the aperture between the stainless and the rubber roller, so the thickness can be controlled. 2)scope of thickness 0.5---3,m 3)the controlling precision ?0.3,m 4)adjustable-thickness 0--1,m 2、Electric coater 1set Technical requisition 1)The controlling theory of coating: with the different deepness of the stainless steel roller, it can drop different quantity of coating, so the thickness can be controlled. 2)Thickness scope 3-10,m 3)Controlling precision?0.5,m 4)Working power: 220V or380V(50HZ) 项目六、涂层检测设备 1套，包括: 1、百格刀 1个 技术要求 1) 结构 1mm间距，6排刀片 2) 可测涂层厚度 0-60,m 2、耐划伤测定仪 1台 技术要求 1) 工作原理 数字放映机工作原理变压器基本工作原理叉车的结构和工作原理袋收尘器工作原理主动脉球囊反搏护理 :一个带有针头的触头,降至被测表面，划一条6cm长的划痕，当涂膜划透时， 针头与金属基体接触由一个灯和电压计识别; 2) 工作电压: 220V*50HZ 3) 载荷: 50?2000g 4) 针头: 碳化钨球形 5) 电源: 220V或380V(50HZ) 3、涂膜圆柱弯曲测试仪 1台 技术要求 1) 试样规格: 宽50mm，厚0.5mm 2) 不锈钢轴直径: 2-32mm,共12根 4、遮盖力测试仪 1台 技术要求 1)数字式自动校准(含2校准 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 板)，LCD显示; 2)精度?1个单位或1%的满刻度值(F.S.D); )测量包括金属化膜在内的表面光反射照度。 3 Equipment for test coating 1set, included: 1、Cratcher 1 Technical requisition: 1)Structure: 1mm space between, 6 rows blades. 2)0-60,m testing scope: 0-60,m 2、resistant scratch ability tester 1set Technical requisition 1)Working theory: Scratching a line of 6mm long in the surface of coat with a contact tip with which a pinhead, it can be displayed by a lamp and a voltmeter if the pinhead touched the metal matrix. 2)Working voltage: 220V*50HZ 3)Loading: 50?2000g 4)Pinhead: tungsten carbide sphericity 5)Power supply: 220V or380V(50HZ) 3、cylindrical camber analyzer for coating 1set Technical specification 1)Standard: width50mm，thickness0.5mm 2)diameter of stainless steel axes: 2-32mm, 12 in total. 4、Tester for hiding power 1set Technical specification. 1)Can calibrate automatically.(including 2 normal calibration plate) 2)precision ?1 or 1% of total scale. 3)Can test the surface reflex of metallized coat. 项目七、涂膜性能检测设备 1套，包括: 1、铅笔硬度仪 1台 技术要求: 1) 结构 铅笔固定稳定，与涂膜成固定角度45?; 2) 铅笔 硬度9B-9H二套 3) 其它工具 专用小刀等 2、流挂涂膜器 1个 技术要求 1) 缝隙数 30?40个 2) 测量范围 10?500μm 3、三角度光泽度仪 1台 技术要求: 1) 测量角度 20?、60?、85?三角度 2) 数据显示 液晶 3) 分辨率 ,1000光泽单位 4) 测量时间 0.5秒/角度 5) 重复性 0.2% 6) 重现性 0.5% 7) 内存 999个具有复位功能的含数据和时间的读数 8) 接口 串口RS232，含数据传送软件 9) 核准 带核准片,自动核准功能 10) 软件 数据能传输到Excel电子 表格 关于规范使用各类表格的通知入职表格免费下载关于主播时间做一个表格详细英语字母大小写表格下载简历表格模板下载 中 11) 电源: 220V或380V 4、高精度细度板 1个 技术要求: 1) 材质 硬质不锈钢制成 2) 精度 0.25μm 3) 测量范围 0--25μm 4)方式 单槽、双槽均可 5、针孔探测仪 1台 技术要求: 1) 检测试样规格 150mm*50mm 2) 有自校准电压检测功能 3) 可见信号及声音报警 4)检测电压分档低、中档控制 Equipment for test capability of coating film 1set, included: 1、pencil hardness meter 1set Technical requisition 1)Structure: the pencil is fixed and steady, there is 45?angle with the coating. 2)pencil hardness: 9B-9H. two sets of pencil. 3)other tools: special knife. 2、Sag film applicator Technical requisition: 1)quantity of aperture: 30--40 2)test scope: 10?500μm 3、3-angle glossness meter 1set Technical requisition 1)the angle tested: 20?、60?、85? 2)method of display: LCD screen 3)resolution: ,1000 luster units 4)test time: 0.5s/angle 5)repeatability: 0.2% 6)reproducibility: 0.5% 7)EMS memory: 999 readings with resetting function, datum and time. 8)Interface: interface in series, deferent software with datum. 9)Approve: with approving flake, automatic approving function. 10)Soft ware: The datum should be transported to Excel 11)Power supply: 220 or 380V 4、High precision fineness board 1set Technical requisition 1)Material: solid stainless steel. 2)precision: 0.25μm 30test scope: 0--25μm 4)Method: single- cell or double-cell. Technical requisition 1)sample size: 150mm*50mm 5、Pinhole detector 1set 2)can adjust the voltage automatically. 3)vediosignal and audio alarm. 4)The testing voltage can be controlled by low-quality and high-quality.