所有路由器端口IP的映射

所有路由器端口IP的映射 华为MT800型路由器的端口映射 TOP 在IE的地址栏里输入路由器的地址( 默认的ip是:192.168.1.1，用户名是:admin，密码是admin ),IE自然会弹出一窗口要求输入路由器 的"用户名"和"密码",MT800的隐含的设置是admin/admin 进入MT800的设置页面后,点击左上角的"其他设定".在选"NAT"(在"其他设定"的下拉菜单中) 在进入"NAT"的页面后,首先确定一下"NAT"的选项是"允许",然后点击添加 在弹出的”NAT 规则添加中出现一表格，下面这样改: RULE FLAVOR选RDR RULE ID填2 IF NAME里选ppp-0 协议 离婚协议模板下载合伙人协议 下载渠道分销协议免费下载敬业协议下载授课协议下载 里选TCP Local 地址 From 里填192.168.X.X(这个就是你的内部IP地址,如果有变,今后自己修改) Local 地址 To里也填192.168.X.X Global 地址 from 和 to 里,两个都不要填,也就是保持0.0.0.0 最后3个端口(目标端口起始值,目标端口终止值,Local端口)填上你想要BS开的TCP端口(BS定义的设置是16881,这里我们输入16881至 16889) 这样提交完后,端口映象就算做完了.如果还不行,可能出错的地方就是IF NAME(有可能是ppp-1) 神州数码DCAD-6010RA ADSL路由设置 TOP 首先登陆路由器的Web管理界面(默认的ip是:192..168.1.1，用户名是:adsl，密码是:adsl1234) 进入之后依次按如下顺序选择:Services—>NAT 在NAT Option选择NAT Rule Entry。然后点击“添加”，之后出线如下界面，填入相应参数。 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 设置完成后点击提交就行了。 具体参数说明如下: Rule Flavor: 规则种类 Rule ID: 判断地址翻译规则的序号，最小的序号最先执行，如有规则符合，不在向更高的ID判断执行。 IF Name: 请选择相应的广域网接口，如PPP，1483B等 Protocol: 选择相应协议(TCP/UDP/ICMP等 Local Address From: 使用规则的本地IP起始值，如果选择全部则填0.0.0.0 Local Address To: 使用规则的本地IP终结值，如果是单一IP，填入IP起始值。如果选择全部则填255.255.255.0 Global Address From: 不用修改 Global Address To: 不用修改 Destination Port From: 目标IP的端口起始值 (16881) Destination Port To: 目标IP的端口终结值 (16889) Local Port: 本地IP端口(0) 在设置好ADSL路由、各网线、交换机以后，便是对上网电脑进行设置了。很多人在做这一步时，往往功溃于此。这里必须注意，在通过ADSL共享上网时，各电脑主要设置网络的选项里有3项内容，分别是IP地址、网关、DNS配置。很多人错在DNS与ADSL路由设置不一致，如果在ADSL的路由设置(DHCP/DNS)中不作任何选择(没有选定“局域网DHCP服务器”)，那么在电脑的网络设置里，DNS配置就不能选当地ISP的DNS，这样是怎样也上不了网的。这时应该在DNS中填ADSL的内置IP值。即在电脑的网络设置中网关与DNS相同，都应填ADSL的内置IP，而网关所对应的IP则就与ADSL的内置IP在同一网段。 阿尔卡特_ADSL_MODEM511E 端口映射的设置 TOP 首先，在浏览器窗口输入10.0.0.138，进入路由设置窗口。 然后依次:选择“高级配置”----“NAPT”---“新增” 然后选择: 通讯协议为TCP 内部IP为网卡IP，如果不知道请使用10.0.0.1 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 内部和外部端口都为16881 外部IP0.0.0.0不变 同理增加16882~9的端口。 最后点“应用” 然后一定记得点左上角“保存所有设置”选项 大功告成，请关机，ADSL MODEM断电。重新启动 普天(GS8100)进行端口映射的 方法 快递客服问题件处理详细方法山木方法pdf计算方法pdf华与华方法下载八字理论方法下载 TOP 普天(GS8100)进行端口映射，升高ID的方法(局域网路由下): IE浏览器键入:192.168.1.1 输入Modem的用户名和密码 “服务,NAT,下拉菜单选择:NAT Rule Entry" 点“添加” 出现新窗口:如下设置 Rule ID: 2(依次的数字，原有映射的基础上，如原来没有，一般为2) Rule Flavor: RDR IF Name: ALL 协议: tcp Local 地址 From: 192.168.1.6 (你在局域网里的IP) Local 地址 To: 192.168.1.6 (你在局域网里的IP) Global 地址 From: 0.0.0.0 Global 地址 To: 0.0.0.0 目标端口起始值: 16881 目标端口终止值: 16889 Local端口: 0 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 点“提交” 然后去保存，重启就OK了 腾达TED8620的设置方法 TOP 普天(GS8100)进行端口映射，升高ID的方法(局域网路由下): IE浏览器键入:192.168.1.1 输入Modem的用户名和密码 “服务,NAT,下拉菜单选择:NAT Rule Entry" 点“添加” 出现新窗口:如下设置 Rule ID: 2(依次的数字，原有映射的基础上，如原来没有，一般为2) Rule Flavor: RDR IF Name: ALL 协议: tcp Local 地址 From: 192.168.1.6 (你在局域网里的IP) Local 地址To: 192.168.1.6 (你在局域网里的IP) Global 地址 From: 0.0.0.0 Global 地址 To: 0.0.0.0 目标端口起始值: 16881 目标端口终止值: 16889 Local端口: 0 点“提交” 然后去保存，重启就OK了 伊泰克(e.TEK.TD)TD-2018猫的端口映象设置 TOP 打开IE,在地址栏里输入路由器的地址,例如192.168.1.1(隐含), 然后ENTER 在弹出来的登录窗口填入登录名和密码(TD-2018的隐含登录名为空,密码为12345),然后点击确定 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 进入TD-2018的web页面后,在左边可以找到"端口绑定服务",点击"端口绑定服务" 进入"端口绑定服务"一栏,我们首先要做TCP的端口映象. 1.选择TCP 2.填入EMULE使用的TCP端口,EMULE里的隐含设置是16881 3.填写主机的内网IP地址 4.点击"添加"把TCP的端口映射加如"服务列表"(添加后,下方的"服务列表"里将会增加一条端口映象的服务) 5.同理再加入16882~9的映射 点击"保存设置" TD-2018的端口映射需要NAPT的支持,检查NAPT是否打开 点击"NAPT"设置 选择"启用NAPT",点击"执行" 最后点击"重新启动",猫重启后,端口映射就算完成了OK ZTX中兴_ADSL_831 端口映射的设置 TOP 打开IE,在地址栏里输入猫的地址,例如192.168.1.1(隐含), 然后ENTER 在弹出来的登录窗口填入登录名和密码,ZXDSL831的隐含登录名和密码均为大写的ZXDSL,然后点击确定 进入中兴ZXDSL831的WEB设置页面后,在右上方可以找到"SERVICE",点击SERVICE 进入SERVICE后,在左边1处点击"NAT",在2处选择“ NAT Rule Entry ”,然后点击"添加" 首先我们做一个TCP的端口映象,BS隐含使用的TCP端口是16881。 1:选择RDR 2.填一个RULE ID,随便写一个数字,只要不跟之前的重复,例如你可以取16881 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 3.选择ppp-0 (这个视你的猫而定,不过绝大多数猫都用的ppp-0) 4.选TCP 5.这里有两个,分别填入你得到的电脑内网的IP地址(注,有时内网IP会有变动,如果有变动,你需要回到此处做相应的修改) 6.这里的两个地址都不需要改动,保持0.0.0.0 7.三个全选"Any Other Port" 8.三个全填入BS使用的TCP端口,例如16881 9.同样方法再加16882~9 点击9添加 再次回到NAT一栏,确认NAT的规则里已经有TCP的端口BS的电脑的IP,然后点击ADMIN 在"ADMIN"里,点击Commit & Reboot 选择"Reboot From Last Configuration"，并点击"保存"储存配置, 再点击"重新启动",然后就可以了 天邑_ADSL_HASB-100 端口映射的设置 TOP 天邑HASB-100 ADSL猫的隐含地址是10.0.0.2(出厂默认) 打开IE,在地址栏里输入路由器地址(例如10.0.0.2),将会进入路由器的登录窗口 在2处填入路由器的登录名和密码,出厂默认的登录名是admin,出厂默认的密码是epicrouter或者是conexant 点击3处的确定 如果密码正确,IE将进入猫的WEB配置页面,点击左下角的"虚拟服务器" 我们需要做两个端口映象,一个是bs的TCP端口(默认是16881) 当然你不一定使用bs默认的端口号 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 1.在ID号里填入数字,给这个端口映射编个号,例如81 2.公共端口一栏和私有端口一栏要填入BS用的TCP端口(默认16881),这两栏里填的数字要相同 3.端口类型选"TCP" 4.填入你的内网IP地址,例如10.0.0.8(内网IP地址可看顶楼的介绍) 5.点击"增加该设置",把这个端口映射加入NAT规则中 点击"保存设置"。同理再做16882~9。 点击"保存设置"后,重新启动猫以后,端口映象的设置就做完了 实达_ADSL_2110EH 端口映射的设置 TOP 假设内网IP为:192.168.10.2 在IE中用打开实达ADSL管理配置页面 用户名:ROOT 密码:GROUTER 1、选择Service?NAT Options: NAT Rule Entry?Add?进入端口映射添加页面 2、添加: Rule Flavor: RDR Rule ID: 2 IF Name: All Protocol: TCP Local Address From: 192.168.10.2 Local Address To: 192.168.10.2 Global Address From: 0.0.0.0 Global Address To: 0.0.0.0 Destination Port From: 16881 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and Destination Port To: 16889 Local Port: 0 3、选择Submit提交 4、选择主窗口菜单的Admin?Commit & Reboot?Commit?重起Modem OK 祝各位好运。 另外: root/grouter是默认的用户名和密码 你可以试一试以下两个用户名和密码: user/starnet admin/starnetadsl 大亚科技 DB-108路由器的端口映射方法 TOP 大亚108全攻略(路由设置方法，端口映射方法) 一、路由设置方法: 1.先硬件连接,现在的交换机没有UPLINK口了确认正确与否:看设备的PC指示灯是否亮起!亮起就OK! 2.网络的配置,注意一定要有适配器和TCP/IP都正确安装协议才行!在IP地址标签下将你的IP设定在(192.168.1.2----192.168.1.254)之间,因为要和你的设备同在一个网段下才行!DNS也记得设哦。不知道啊，自己打电信的电话去问下。 确认正确与否:在运行中敲入下列命令"ping 192.168.1.1"看是否连接超时!不超时就OK! 如果您的系统是2000或XP，那就只需选择自动获取IP及DNS。但是话说回来两台机子要联网的话你也搞设IP地址吧，呵呵， 3. 打开IE浏览器,在地址栏处输入"192.168.1.1",随后出现的窗口输入你的用户名和密码!在你的说明书上能找到!这里我输入的是"admin"和"dare"出厂的默认的用户和密码!有的密码是:dareadsl accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 如果不能进入，请在通电情况下用别针连戳后面复位孔三次，即可进入(猫已为出厂设置)～ 4.单击左侧配置下的WAN,这是有侧页面进入设置界面!这里是最重要的,我是福州的用户,具体设置还要询问各位的当地电信部门! 最下方虚电路选"0"后点"提交", 最上方的启用选YES,VPI添0,VCI添200,(我这个是按照福州电信设置的,具体的数字去问当地的电信局)静态IP和子网掩码都添"0.0.0.0", 封装协议选"PPPOE LLC" 桥选"DISABLED" 用户名和口令添入你在电信申请的!不要说不知道啊，我晕„„„„.. 断开连接间隔输入你想要的数值,输入0时永久连接! 审核选"AUTO"即可! 自动连接副选框选中! DHCP依你的情况而定!我没设! 网关保持默认"0.0.0.0" 点一次提交. 5.继续来到WAN这个界面下,这次虚电路选"1"后点提交,将启用设"NO",VCI添0,VPI添0,静态IP和子网掩码都添"0.0.0.0",封装协议选"PPPOE LLC",桥选"DISABLED",自动连接副选框不选!好了其他的保持默认!在次点提交,然后保存设置,设备重启!如此反复一直到虚电路为7才行!我的是这样设,麻是麻烦了些,别的方法好象行不通。不这样设好像有时网页会打不开但像QQ还是可以用的。这点我一真不明白为什么。有的人说6.7可以不设是关的但是VCI和VPI也是要设0其它的一样的设。 6.设备稳定后,现在点WAN下面的"NAT",在右侧的下拉菜单中选"Dynamic NAPT",点提交,保存,设备重启! 7. 最后一步,点击NAT下的DNS,随后的右侧界面中DNS代理选择"USE AOTO DISCOVERED DNS SERVERS ONLY",其它不动,提交,保存设置,设备重启!这里好像莫认的就是USE AOTO DISCOVERED DNS SERVERS ONLY还过还是要看下是不是哦。现在应该可以上网了!如果不行你就要在"系统日志"和"诊断测试"里面看看是哪里出错! 二、大亚DB108和102端口引射设置方法: accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 既然已经把这个设备开启了路由功能,但是问题又来了,我自己电脑想变成一个网站,能够叫别人来访问我的电脑或者是FTP呢?其实很简单!进入它设备里面的高级配置也就可以了.IP地址:; 看见上面有个虚拟服务器没有?进去后添加你想做成站的IP也就行了!填写端口也就算设置成功了,提交保存,这时候你的电脑可以说引射出去了.先别忙,不要激动,还有最关键一个问题没有解决,也就是这个设备的ADSL管理端口和你做站的电脑端口都是80,这样别人访问的时候还是不能访问你的指定服务器的,如何解决这个问题呢? 那就有要找到这个设备里面的其它配置了,点进去后啥都不去管直接看见HTTP 服务器端口 80 把它修改成你自己想的一个端口也就OK了!这时候提交保存,那你也就能够叫别人从外面访问你的站点了. 最后保存后你在访问你的ADSL就不能打:了!这样你是进不了你的ADSL设备的,假如我把端口修改成为81了,以后想进ADSL设备里面管理的话,那就只有在IE上敲::81/用这个端口进去管理你的,,,,设备～ 1. 通过192.168.1.1/doc/index1.htm进入Modem的高级设置界面。用户名:admin 密码:dare 2. 进入“虚拟服务器”选项 3. 填入“公有端口”、“私有端口”，(例:如果你做WEB服务器那一般情况下可以填80) 4. “主机IP地址”填你那台服务器的局域网内的IP 5. “端口类型”根据你做的服务器来填(例WEB服务和FTP服务器用“TCP)比如,我们在BS中设置的TCP端口是16881,那么里面就写16881 6. 保存设置 注:你测试的时候请用外网的机子来访问你这个外网的IP，内网的机器是无法访问那个外网IP的。 OK GREENNET ADSL MODEM 1500c TOP 前提:使用格林耐特ADSLmodem并且使用PPPOE拨号联入INTERNET 并且在PVC0上设置了pppoe协议，且设置了本机的ip地址是192.168.1.7 第一步:关闭虚电路PVC1~7 具体方法是，先在IE地址栏输入192.168.1.1，输入用户名admin密码greennet 进入用户管理界面 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 然后参数设置,wan 然后在右侧的界面内的虚电路选项选择1， 然后“提交”， 页面刷新以后，在“是否启用”选择“否”，在“桥接”选项选择“禁用” 点击“提交” 重复以上的过程，即可关闭其他2,7的虚电路; 第二步:在参数设置,NAT的界面中，将NAT参数设置为动态NAPT 第三步:在参数设置,虚拟服务的右侧界面中， 添加虚拟服务 首先添加ID:1;公有端口:16881;私有端口:16881;TCP;主机IP:192.168.1.7 然后点击设置 其次添加ID:2;同上，一直加到16889 然后点击设置添加虚拟服务 最后一步，就是在参数设置,保护重启界面，选择保存重启 这样就全部搞定了 如果你使用了个人防火墙，请在防火墙的IP规则中添加有关允许16881~9tcp规则 华硕6000EV/6005HW ADSL MODEM中设置端口映射 TOP 在主菜单中点“NAT”，会有个“nat channel list”，设置如下: 在nat channel list里面的mupltiple port forwarding里面填写以下内容: action: add channel no:1 protocol:tcp accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and incoming port, begin:25, end :25 new port begin:25,end :25 new ip address:192.168.1.2 保存设置 LINKSYS ADSL路由器中中设置端口映射 TOP 在主菜单中点“advanced”，接下来的菜单中有个“forwarding”，设置如下: extport: 25 to 25 ip address:192.168.1.2 然后点击“apply”就可以了。 频蓝色小精灵路由器中设置端口映射 TOP 在高级设置页面下点“Distributed Servers Setup(Virtual Serves,虚拟主机设置)” 每个Virtual Server 定义为一个Service Port，所有对这个端口的访问都会重定向到相应的Service IP 所对应的计算机。 Service Service Port Service IP Enable Email 25 192.168.1.2 ? IM 701G 艾玛白色 ADSL Modem 设置端口映射 TOP 进入ADSL设置，----安全设置----NAT的高级配置...----增加Reserved Mapping... 增加25 端口映射， 如下所示: Global IP地址内部的IP地址传输类型端口号 和接口地址相同 192.168.1.2 tcp 25 保存----重启设备 合勤642 Adsl Modem设置端口映射 TOP 在运行里或MSdos窗口里输入 telnet 192.168.1.1, 输入密码(缺省值为1234)后即可进入ZyNOS系统 进入Menu 11.1 - Remote Node Profile accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 将 Edit Filter Sets= No 用空格键改为YES后，进入Menu 11.5 - Remote Node Filter菜单 将protocol filters=6 用空格键去掉后回车存盘返回后 Edit Filter Sets= No 不要管它，回车存盘 在Mail Menu 设置15. SUA Server Setup Port # IP Address ------ --------------- 1.25 192.168.1.2 回车存盘 全创1100白色 ADSL MODEM中设置端口映射 TOP IE地址栏里输入 一般默认的是用户:admin密码:12345678(或者123456) 进入虚拟服务器设置 “公共端口”、“私有端口”都填上要做的端口(25) “端口类型”选“TCP”。 “主机IP地址”填自己PC的内网IP (192.168.1.2)。然后按一下“添加此设置”。 IE地址栏里输入 192.168.0.2 进入主界面，点击“保存设置”，ADSL会重启 大亚DB108和102设置端口映射 IE地址栏里输入 进入虚拟服务器设置 添加内网IP, 端口为25 提交保存 D-Link DI-604端口映射 TOP 以做Web服务器为例，局域网ip设为192.168.0.173。 首先根据说明登陆到路由器，点击“进阶设定”,“虚拟服务器” 如下图所示: accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 激活:选取 端口:选择80端口 服务器IP地址:192.168.1.173 常见因特网服务:WEB(80) 排程:选择任何时间 如下图所示: accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and 按执行按钮后提示需要重新启动路由器，按重新激活按钮使其生效。 accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel welding procedures of steel pressure vessel NDT 9 JB/T4744-2000 steel pressure vessel products mechanical properties test of welded plate II, mechanical equipment installation engineering 1 GB150-98 2 GB50128-2005 vertical cylindrical steel pressure vessel steel welded specification for construction and