CAD commonly used command characters(CAD常用命令符)
CAD commonly used command characters(CAD常用命令符)
Right click on the toolbar, tools - Options - configuration - reset, or command: MENULOAD command
Then click browse and select ACAD.MNC to load; if you are using the 2006 version of CAD, the direct CTRL+9 is on
Sure。
If the toolbar in AUTOCAD is gone,
Right click on the toolbar,
Or tools -- options -- configuration -- reset,
You can also use the command: MENULOAD command,
Then click browse and select ACAD.MNC to load.
The toolbar is missing most because: 1. closes all toolbars; the 2. menu file is missing.
The first situation is dealt with:
1. click the menu view toolbar, (corresponding to command toolbar), pop up the toolbar dialog box, and select ACAD dishes
For a single group, tick the toolbar you want on the left side of the toolbar.
2., or click the menu tools - Options - configuration - reset,
reload, you can reset the value in the selected configuration to the system
Default settings.
In the second case, you can use the MENU command, and then click Browse to find the folder where the menu file is located, and select the appropriate dish
A single set of files, such as ACAD.MNC, can be loaded (MNU will recompile).
L, *LINE line
ML, *MLINE multiline (create multiple parallel lines)
PL, *PLINE, polyline
PE, *PEDIT edit polyline
SPL, *SPLINE spline curves
SPE, *SPLINEDIT editing spline curves
XL, *XLINE construct lines (create infinite lines)
A, *ARC arc
C, *CIRCLE circle
DO, *DONUT rings
EL, *ELLIPSE ellipse
PO, *POINT points
DCE, *DIMCENTER center mark
POL, *POLYGON regular polygon
REC, *RECTANG rectangle
REG, *REGION surface domains
H, *BHATCH pattern fill
BH, *BHATCH pattern fill
-H, *HATCH
HE, *HATCHEDIT pattern fill... (modify a pattern or gradient
fill)
SO, *SOLID 2D fill (create solid filled triangles and quads)
*revcloud revised the cloud line
*ellipse elliptic arc
DI, *DIST distance
ME, *MEASURE fixed distance equal
DIV, *DIVIDE, fixed number equal
DT, *TEXT, single line text
T, *MTEXT multiline text
-T, *-MTEXT multiline text (command line input)
MT, *MTEXT multiline text
ED, *DDEDIT edits text, callout text, property definitions, and feature control boxes
ST, *STYLE text styles
B, *BLOCK create blocks...
-B, *-BLOCK create block... (command line input)
I, *INSERT insert block
-I, *-INSERT insert block (command line input)
W, *WBLOCK, the write Block dialog box (writes objects or blocks
to the new graphics file)
-W, *-WBLOCK write block (command line input)
--------------------------------------------------------------------------------
AR, *ARRAY array
-AR, *-ARRAY array (command line input)
BR, *BREAK interrupts
CHA, *CHAMFER chamfer
CO, *COPY copy objects
CP,
*复制复制对象
E、*擦除删除
恩,*延长延伸
F、*角圆角
m *移动移动
MI,*镜镜像
Len,*延长拉长(修改对象的长度和圆弧的包含角)
哦,偏移偏移
RO,*旋转旋转(绕基点移动对象)
S,*拉拉伸
SC,*规模缩放
TR,*装饰修剪
*爆炸分解
木豆,*对齐标注对齐标注
丹,* dimangular角度标注
DBA,* dimbaseline基线标注
DCO,* dimcontinue连续标注
DDI直径标注直径标注,*
爸爸,编辑标注*标注编辑
DLI,线性标注物件
多尔,* dimordinate坐标标注
DRA,* dimradius半径标注
乐,* qleader快速引线
D、* DIMSTYLE标注样式管理器
DST,* DIMSTYLE标注样式管理器
STA,*标准标准配置(CAD标准)
Dre,* dimreassociate重新关联标注
DDA,* dimdisassociate删除选定择标注的关联性
LA,*层图层特性管理器
LA,*层图层特性管理器(命令行输入)
LW,* lweight线宽设置…
-----------------------------------------------------------
---------------------
LT,*线型线型管理器
LT,*线型线型管理器(命令行输入)
线型,线型线型管理器*
LTYPE *线型线型管理器(命令行输入)
* lweight线宽线宽
LTS,*所有设置全局线型比例因子
Tor,*环圆环(三维)
我们楔体*楔
3P,* 3dpoly三维多段线
3F,* 3dface三维面
在交集相交,*
大学,*工会并集
苏*减差集
EXT,*挤压拉伸(三维命令)
Rev,*旋转旋转(通过绕轴旋转二维对象来创建实体)
嗨,隐藏消隐
沙,* shademode着色
SL,*片剖切(用平面剖切一组实体)
美国证券交易委员会,*部分切割(用平面和实体的交集创建面域)
天道酬勤,干预干涉
3A,* 3darray三维阵列
3do,* 3dorbit三维动态观察
轨道,* 3dorbit三维动态观察器
RPR、* rpref渲染系统配置
RR,*使渲染
直流,* AdCenter设计中心Ctrl + 2
ADC,* AdCenter设计中心
中心,广告中心设计中心*
妈,特性匹配*特性匹配
TP、* toolpalettes工具选项板Ctrl + 3
中国,
*性能特性Ctrl + 1
CH,改变修改现有对象的特性
PR,*性能特性Ctrl + 1(控制现有对象的特性)
道具,*性能特性Ctrl + 1(控制现有对象的特性)
莫*性能特性Ctrl + 1(控制现有对象的特性)
prclose,* propertiesclose(关闭”特性”选项板)
前,打印预览*预览
打印,*情节打印Ctrl + P
*工具栏,工具栏/自定义(显示、隐藏和自定义工具栏)
-----------------------------------------------------------
---------------------
Z *变焦实时缩放
P,*泛实时平移
P *潘实时平移(命令行输入)
操作系统,捕捉对象捕捉设置*
os,*捕捉对象捕捉设置(命令行输入)
Sn,*卡捕捉(
规定
关于下班后关闭电源的规定党章中关于入党时间的规定公务员考核规定下载规定办法文件下载宁波关于闷顶的规定
光标按指定的间距移动)
PU、*清洗清理(删除图形中未使用的命名项目,例如块定义和图层)
PU,*清洗清理(命令行输入)
R×重绘(刷新当前视口中的显示)
类风湿性关节炎,* redrawall重画
再次,重生成*回复
真的,regenall全部重生成*
任*重命名重命名
仁,*重命名重命名(命令行输入)
AA、*地区面积
铝,*对齐对齐
AP,*载入应用程序加载应用程序…
ATT,* attdef定义属性…
- ATT,* attdef定义属性…(命令行输入)
吃了,* attedit单个…(编辑块插入上的属性)
吃,* attedit单个…(命令行输入)
注意,* attedit单个…(命令行输入)
博,*边边界创建…
博城,*边边界创建…(命令行输入)
CHK,* checkstandards检查…(检查当前图形的标准冲突情况)
Col,颜色颜色…(设置新对象的颜色)
颜色,颜色
DBC,* dbconnect数据库连接管理器
多夫,* dimoverride替代
博士,* draworder显示顺序
DS,* dsettings草图设置
-----------------------------------------------------------
---------------------
DV,*动态检视定义平行投影或透视视图
网络,为对象选择创建可重复使用的过滤器过滤器
G *组”对象编组”对话框
G、*组”对象编组”对话框(命令行输入)
GR,* ddgrips选项(…选择)
网络成瘾,* imageadjust图像调整(控制图像的亮度、对比度和褪色度)
IAT,* imageattach附着图像(将新的图像附着到当前图形)
ICL,* imageclip图像剪裁(为图像对象创建新的剪裁边界)
我,*图像图像(管理图像)
-IM, *-IMAGE images (command line input)
IMP, *IMPORT input
IO, *INSERTOBJ, OLE objects
LI, *LIST list (displays database information for selected objects)
LO, *-LAYOUT, new layout
LS, *LIST list (displays database information for selected objects)
MS *MSPACE, from the drawing switch to model space viewport space
MV, *MVIEW to create and control the layout of the viewport (in the Layout tab when)
OP, *OPTIONS options... (custom settings)
PA, *PASTESPEC paste dialog box (insert clipboard data and control data format)
PARTIALOPEN, *-PARTIALOPEN (loads the geometry of the selected view or layer into the graph)
When PS and *PSPACE work on the Layout tab, AutoCAD switches from model space to drawing space
PTW, *PUBLISHTOWEB posted online...
SCR, *SCRIPT run scripts... (execute a series of commands from
script files)
SE, *DSETTINGS sketch settings (specify capture mode, grid, pole tracking, and object capture tracking settings)
SET, *SETVAR sets variables (lists system variables or modifies variable values)
SP, *SPELL spell check... (check spelling in Figure)
TA, *TABLET digitizer (calibration, configuration, opening and closing of connected digitizer)
TH, *THICKNESS sets the current 3D thickness (system variable)
TI, *TILEMODE sets the model tab or the last Layout tab to the current (system variable)
TOL, *TOLERANCE tolerances
UC, *UCSMAN displays the UCS dialog box
UN, *UNITS units (control coordinates and angle display formats and determine accuracy)
-UN, *-UNITS units... (command line input)
V, *VIEW named view... (save and restore named views)
-V, *-VIEW named view... (command line input)
VP, *DDVPOINT view preset... (set 3D viewing direction)
-VP, *VPOINT
X, *EXPLODE output... (save objects in other file formats)
EXIT, *QUIT quit
EXP, *EXPORT output
XA, *XATTACH adheres to external reference (attaching an external reference to the current graph)
XB, *XBIND, an external reference bound (bound to one or more named objects in an external reference) defined to the current graph
-XB, *-XBIND external reference binding (command line input)
XC, *XCLIP external reference clipping (defines external reference or block clipping boundaries, and sets the front clipping plane or after clipping the plane)
XR, *XREF external reference manager (external reference for controlling graphic files)
-XR, *-XREF external reference manager (command line input)