慧谷阳光A座测量方案

慧谷阳光A座测量 方案 气瓶 现场处置方案 .pdf气瓶 现场处置方案 .doc见习基地管理方案.doc关于群访事件的化解方案建筑工地扬尘治理专项方案下载 目 录 1 编制依据………………………………………………………………2 2 工程概况………………………………………………………………2 3 施工准备………………………………………………………………2 4施工测量方法及技术措施……………………………………………3 5:施工 计划 项目进度计划表范例计划下载计划下载计划下载课程教学计划下载 ………………………………………………………………11 6:施工管理措施…………………………………………………………11 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency response (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 1 编制依据 1.1慧谷阳光住宅小区施工组织总设计。 1.2 慧谷阳光住宅小区A座施工组织设计。 1.3慧谷阳光住宅小区A座住宅楼施工图纸。2001-C-08A 1.4甲方提供的北京测绘设计研究院2001拨地159工程钉桩坐标测量成果,A、B、C、D、E、F桩,以及2001普测2676工程水准测量成果,BM1、BM2、BM3,。 1.5《工程测量规范》,GB50026-93,。 1.6《建筑工程施工测量规程》,DBJ01-21-95,。 1.7《钢尺检定规程》,JJG4-89,。 1.8《经纬仪检定规程》,JJG414-94,。 1.9《水准仪检定规程》,JJG425-94,。 2 工程概况 慧谷阳光住宅小区A座住宅楼位于小区的西南角～东面距E座住宅楼15米～西面距围墙10米～北面距景观围墙12米～南面距房客中心6米。 本工程南北长44.480米～东西43.880米～呈“L”型。建筑?0.00相当于绝对标高35.85米～室内外高差0.15米～建筑最大高度49.40米。基础板底标高-8.50米～地下室层高3.60米～首层层高3.60米～二层层高4.00米,三，十五层层高2.8米。 3 施工准备 3.1场地准备 本工程施工现场地势起伏较大～需先采用机械进行场地平整～待施工场地附合测量要求后～再进行施测。 3.2测量仪器准备 所有测量器具必须经专业法定检测部门检验合格后～方可使用。使用 all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st-day management of the various fire fighting equipment fire-to- strengthening the day? 2 慧谷阳光住宅小区A座 施工测量方案 时应严格遵照有关操作规程的要求～并按DBJ 01-21-95规程要求进行保管及维护,仪器配备见下表,。 测量器具表 表一 设备名称 编号 型号 精度 生产厂家 数量 检定日期 激光经纬仪 100351 J2-TDB 2″ 苏一光 1台 2001.12.29 水准仪 66298 S3E 2.5mm 102工厂 1台 2002.09.02 铝合金塔尺 / T2-432 2mm 南京 1把 2002.09.01 钢卷尺 / YT-50 1mm 哈尔滨 2把 2002.08.25 卷尺 / YT-5 1mm 淅江 5把 2002.08.25 线锤 / 0.8kg / / 1只 2002.08.25 3.3 技术准备 3.3.1 所有参加施工测量人员、验线人员必须持证上岗～施工放线人员要固定～不能更换～如有特殊需要必须由现场技术负责人同意后负责调换～以保证工程正常施工。 3.3.2 测量人员必须熟悉图纸～了解设计意图～学习测量规范～充分掌握轴线、尺寸、标高和现场条件～对各设计图纸的有关尺寸及测设数据应仔细校对～必要时将图纸上主要尺寸摘抄于施测记录本上～以便随时查找使用。 3.3.3 测量人员必须定时到现场踏勘～全面了解现场情况～检测测量控制点～并及时平整和清理施工现场～保证测设工作的正常进行。 3.3.4 测量人员必须按照施工进度计划要求～施测方案～测设方法～测设数据计算和绘制测设草图。以此来保证工程各部位按图施工。 4(施工测量方法及技术措施 4.1建筑物定位及标高引入 4.1.1 建筑物定位 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 3 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 4.1.1.1 选用最近的平面控制点2和控制点3～依据总平面图上提供的建筑物的坐标计算出与平面控制点的关系～计算出各点的方位角、距离及间距～各点的方位角、距离及间距见表二和图一。 建筑物坐标及控制点的方位角及距离 表二 点号 横坐标,Y, 纵坐标,X, 方位角 距离 2 510556.169 315019.241 ?1=50?56′21″ A3=52.780 3 510436.180 315017.640 ?2=20?53′09″ B3=26.748 A 510419.049 315067.562 ?3=5?23′22″ C3=21.130 B 510419.049 315038.182 ?4=5?50′13″ D3=38.264 C 510431.229 315038.182 ?5=35?37′02″ E3=46.423 D 510431.229 315055.582 ?6=7?00′03″ F3=56.637 E 510462.929 315055.582 F 510462.929 315067.562 建筑物与控制点位置示意图(图一) ? all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st-day management of the various fire fighting equipment fire-to- strengthening the day4 慧谷阳光住宅小区A座 施工测量方案 4.1.1.2 建筑物主要轴线定出后～还应定出轴线控制桩～每方向定出3个～并在固定物上画出方向点～检查各点间距、名义长与实际长误差小于?5mm时～上报有关部门验线～合格后～再将控制桩位保护好～之后方可进行基础挖方施工。建筑物北侧控制桩引至距景观围墙1米处～南侧和西侧桩点分别引在墙上和距墙1米处各一点～东侧桩点距基坑6米。控制桩位置及做法见图二、图三。 控制桩位置示意图(图二) and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 5 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 砼 木桩钉室外地坪 土 砖 控制桩做法示意图(图三) 4.1.2标高引入 水准点BM1、BM2、BM3均在场外～可先将仪器在两个水准点预测间距中点安置～校测水准点～然后再将高程引入场内。高程控制点布设位置在场区南墙上～设置3个点～高程与室内?0.00标高相等～即35.85m 。 4.2 基础施工平面与标高控制 4.2.1基础放线的允许偏差应满足测量规程,DBJ 01-21-95,的规定。 长度L,30m 允许偏差+5mm 30m,L,60m 允许偏差+10mm 轴线的对角线尺寸允许误差为边长误差的?2倍～外廓轴线夹角的允许误差为1'。 - strengthening the day? all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st-day management of the various fire fighting equipment fire-to6 慧谷阳光住宅小区A座 施工测量方案 4.2.2校核设计图上的定位依据～定位条件～建筑物四周边界尺寸～审核建筑物的设计标高是否正确。 4.2.3定位验线合格后～用小白线沿已测设到地面上的槽上口线各拐点抻线～撒出灰线～白灰线宽度宜小于15mm。 4.2.4在挖出工作面后～先钉出距槽底1米控制桩～先校测现场高程控制点～两点间实测高差与名义高差之差小于,3mm～取中为后视～改变仪器高度～重复上述过程～如小于,2mm～即可使用。 4.2.5 CFG桩基层～底板防水保护墙线～底板下皮放线。 在原设轴线控制桩安置仪器～定出基底轴线交点～在此交点安置仪器～校测角度误差不得大于,24″,如超出则调整此交点。然后测设出各轴线交点～用各点间距校核,误差不得大于,5mm。合格后再放细部线～标高使用槽底1米高程点～用现场高程点双仪器法校测～2C之差不得大于,5mm。 4.2.6底板上皮～地下一、二层放线合格后～要沿横轴及纵轴方向做出轴线控制线～并将此控制线引至槽顶定桩保护～以此作为基准线～然后再放细部线。首层放线验线合格后～根据流水段分段情况～将各大角处轴线或模板线引至墙外皮～用线坠吊线～然后弹墨线～为下层段及模板控制提供可靠依据。 4.2.7各部位放线的允许误差 项次 项目 允许误差,mm, L,30m ,5 外廓主轴线 1 长度,L, 30,L ,60m ,10 2 细部轴线 ,2 3 承重墙、梁、柱边线 ,3 4 非承重墙边线 ,3 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 7 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 5 门窗洞口线 ,3 6 相邻两板表面高低差 2 7 轴线位置 5 8 预埋管线中心线位置 3 9 预留洞中心线位置 10 10 截面内部尺寸 ,10 4.2.8轴线竖向投测允许误差 项目 允许误差,mm, 每层 3 总高 10 4.3 ?0.000米平面、标高控制校核 4.3.1平面校核 在地下结构施工至?0.000时应进行平面校核～依据场区平面控制网～对楼的主轴线及建筑物楼角坐标进行校核～校核方法采用坐标计算法进行～依据场区平面控制网及楼角坐标～计算坐标增量、方位角、对建筑物楼角进行校核～同时依据施工图各轴线的间距～校核所布设轴线间距～其误差小于?3mm。采用钢尺量距～温度超过 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 温度?5度时～应进行三差改正～量边误差小于?3mm～测角采用J2级经纬仪一测回～正倒镜取中数即可～测角误差小于?12"。量边、测角时均应考虑外墙与轴线的尺寸～避免出现较大误差。 4.3.2 标高校核 依据场区BM1、BM2、BM3三个水准高程点及在场区内布设的高程控制点～按场外水准施测精度～对建筑物进行标高校核～以保证整个场区整体标高施测精度。首层标高误差应控制在?3mm以内。 person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st-day management of the various fire fighting equipment fire-to- strengthening the day? all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.8 慧谷阳光住宅小区A座 施工测量方案 4.4 ?0.000米以上平面与标高控制 4.4.1平面及竖向控制 4.4.1.1在?0.000处平面校核无误后～为保证建筑物在竖向控制精度～可布设激光控制点～并配合J2级经纬仪进行校核。各激光控制点布设在首层底板预埋铁上～采用强制对中基座～并在其正上方预留20cm×20cm的激光投测孔。若投测距离过大～可对楼层分段～在分段处按同样方法做出各激光控制点～然后采用二级接力方法投测激光控制线～并配合J2级经纬仪进行校核。具体激光控制点布置见附图。 4.4.1.2激光控制线投测完成后～应及时施测各细部墙线及门、窗洞口线～同时注意各大角线的准确性～以便准确支护模板、保证建筑物大角的垂直度。门窗应配合J2级经纬仪在建筑物外进行调校～每次均应以首层门窗为准～以减少误差积累～保证外观达到质量要求。 4.4.1.3激光控制线投测方法:在首层控制点上架设激光经纬仪～调置仪器对中整平后启动电源～使激光经纬仪发射出可见的红色光束～投射到上层预留孔的接受耙上～查看红色光斑点离耙心最小点～将仪器旋转画圆～找出圆心～此点即作为第二层上的一个控制点～其余控制点可用同样的方法向上传递～弹出控制线。 4.4.1.4 施工层放线时～应先在结构平面上校和投测轴线～闭合后在测设细部轴线～然后据此测设墙、梁、柱、门窗洞口等边线。墙体边线采用20cm控制线进行控制～大模板采用50cm控制线进行控制。 4.4.2标高控制 首层放线后～用水准仪将现场高程点引至建筑物体上～用红漆标注在建筑物上～引测三个标高点～以利于相互闭合～然后校测高程点～名义高差与实测高差如不大于?3mm～则应取中～抄测时～尽量将水准仪放置在测点范围的中心位置～并进行一次精密定平。之后将每流水段标高起始点定and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 9 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 在阳台边～每层均应从首层起始标高线竖直量取～校测传递上来的标高。各楼层均抄测0.5米建筑标高水平控制线。如首层标高从 ，0.50线向上 3.40米,二层为6.20米,三层为9.00米,依次类推,总高度均从首层，0.50线向上量取。 4.5装饰工程及建筑安装工程测量控制 4.5.1在装饰与设备安装施工测量前～除应熟悉设计图纸、验算有关测量数据外～还应核对图上的平面和高程坐标系统与现场是否相符～对所用的测量控制点及其成果应进行检查与校测。 4.5.2在结构施工中应按装饰施工测量的精度要求及时将装饰工程所需的控制点、线弹划并固定在已建好的地面、墙面、柱、梁、顶板、门窗洞口等处。 4.5.3装饰与设备安装工程所测设的水平线、铅垂线与数值投测应符合下列要求 4.5.3.1同一条水平线标高允许误差为?3mm～应选择统一的水平标高控制线。 4.5.3.2室外铅垂线、使用经纬仪投测～两次的结果之差应小于2mm。 4.5.3.3室内铅垂线可用线坠或垂准仪投测～其精度应高于1/3000。 4.5.3.4装饰与设备安装施工测量控制～应与结构控制线为依据测设～以保证结构与装修施工尺寸统一。 4.6 建筑物沉降监测,委托有资质的单位进行。 4.7 主要技术措施 4.7.1 使用经纬仪观测时～应随用、随检～并随时采用相应校正措施～严格执行基本观测要求。任何情况下均不得采用单镜观测～并应避开在阳光照射下进行轴线的投测。 4.7.2 使用连通水管应首先检查管内存气状况～以确保连通水准管在 -day management of the various fire fighting equipment fire-to- strengthening the day? all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st10 慧谷阳光住宅小区A座 施工测量方案 无气泡状态下使用。 4.7.3 边长丈量采用标准拉力无悬链丈量～实测尺温～并对量距的名义长实施温度、比长改正,短边时应凭经验拉力,。 4.7.4 水准仪测量不得使用未经闭,复,合核准的起始点做观测试点。 4.7.5 楼面平面轴控制线逐层检查～各层、各方向平面轴控制线间距与首层同一位置轴控制线间距差不大于3mm。 4.7.6 严格执行预检验线签认手续～未经验收签认的～不得进行下道工序～外轮廓尺寸误差不大于3mm～细部尺寸误差不大于2mm。 4.7.7 楼层平面或高程放线测量应遵循先整体后细部的原则～坚持控制线与控制线之间的传递测量～禁止使用结构轮廓为平面或立面关系的传递。 5:施工计划 5.1测量计划 根据施工不同部位～紧密配合施工进度进行测量工作～务必保持工程各个不同部位施工的要求进行投测放线。 5.2测量仪器配备计划 主要配备J2级激光经纬仪一台、S3E级水准仪一台、50米钢尺1把。铝合金塔尺1把,施测所用的仪器均由专人保管～专人使用～保证仪器、设备的完好率～以保证正常施测。 5.3施测人员 验线员一名,放线员三名。 6:施工管理措施 6.1保证质量措施 6.1.1为保证测量工作的重要部位的精度,如基础、结构变换层～应绘制放样简图～以便现场放样。 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 11 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic 6.1.2对仪器及其他用具定时进行检验～以避免仪器误差造成的施工放样误差。测量工作是一个极为繁忙的工作～任务大、精度高～因此除必须按《建筑工程施工测量规程》,DBJ01-21-95,要求～对测量仪器、量具按规定周期进行检定外～在周期内的经纬仪与水准仪的主要轴线关系还应每2，3个月进行定期校验。此外～还应做好测量辅助工具的配备与校验工作。 6.1.3每次测角都应精确对中～误差?0.5mm～并采用正倒镜取中数。 6.1.4高程传递水准仪应尽量架设在两点的中间～消除视准轴不平行于水准轴的误差。 6.1.5使用仪器时在阳光下观测应用雨伞遮盖～防止气泡偏离造成误差。 6.1.6每个测角、丈量、测水准点都应施测两遍以上～以便校准。 6.1.7每次均应作为原始记录登记～以便能及时查找。 6.2组织与管理措施 6.2.1测量工作由项目主任工程师主抓、技术部门负责人负责～测量组长组织实施观测的 管理制度 档案管理制度下载食品安全管理制度下载三类维修管理制度下载财务管理制度免费下载安全设施管理制度下载 ～组织由栋号长、测量组长、测量员及验线人员组成联检组～认真执行“三检制”每个流水段必须验线一次～并申报监理验线。 6.2.2施工验线 施工控制线,方格网,的验线工作由本项目部技术组负责～各建筑物控制网线由项目质量部门及栋号长负责～建筑物的轴线及细部尺寸由项目部质量部门验线～验收后申报监理公司验线。 6.2.3资料管理 本工程目标定为争创“市优”工程～因此各项的技术资料,包括测量台帐,均应从一开始就按项目部的各项要求进行收集整理～测量资料主要有: strengthening the day? all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing(10) idents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible.person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such acceath) son responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (ded, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the perinjurDivision in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the edures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, presse procvance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, havroject Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, aduty Pfor the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Depby the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible onse (1) If a major accident occurs, the project should set up emergency response teams, chairedand special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respor accidents of the direct economic nd tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents once every quarter, inspections a?fighting equipment. -fire extinguishers and fire- Guard monthly check?y time in good condition. affed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at anfighting equipment, authorities should be st-day management of the various fire fighting equipment fire-to-12 慧谷阳光住宅小区A座 施工测量方案 1. 施工测量方案及审批。 2. 北京市城市规划局红线桩及水准点 通知 关于发布提成方案的通知关于xx通知关于成立公司筹建组的通知关于红头文件的使用公开通知关于计发全勤奖的通知 单。 3. 平面控制内业校算资料,包括平面控制网示意图、各项外业观测资料以及平差计算资料及成果表等,。 4. 高程控制测量内业校算资料,包括高程控制网示意图、各项外业观测资料以及平差计算资料及高程成果表等,。 5. 工程定位图。 6. 工程定位测量成果。 7. 测绘院验线合格通知单。 8. 楼层测量记录。 9. 竣工验收资料。 10. 沉降观测资料。 6.3安全技术措施: 1,轴线投测到边轴时～应将轴线偏离边1米～防止高空坠落～保证人员及仪器安全。 2,每次架设仪器～螺旋松紧适度～防止仪器脱落下滑。 3,较长距离搬运～应将仪器装箱后再进行重新架设。 4)轴线引测预留洞口200χ200mm预留后～除引测时均要用木板盖严密～以防落物打击伤人或踩空。 5)向上引测时～要对工地工人宣传～不要从洞口向下张望～以防落物打中。 6)外控引测投点时要注意临边防护、脚手架支撑是否安全可靠。 7)遵守现场安全施工规程。 and special tools for emergency response equipment and facilities. Emergency preparedness and response plan 1) emergency respon 第 13 页 共 13 页 se (1) If a major accident occurs, the project should set up emergency response teams, chaired by the project manager, head of production and safety coordinators, professional foreman for the crew, primarily responsible for the orderly rescue when an emergency occurs or processing, outsourcing, team manager and support staff, assisting the Deputy Project Manager for related auxiliary work. (2) after the accident, the project manager is responsible for field commander, advance the establishment of emergency response team personnel, accountability, seriously injured officers sent out rescue, have procedures to deal with accidents, incidents, maximum reduction in casualties and property loss. (3) If an accident occurs, press Division in advance for emergency personnel cleared, concentrate manpower and material and financial resources to rescue the injured, decrease of the maximum loss. (4) after the accident processing work (5) identified the cause of the accident and the person responsible. (6) the written report to the supervisor in writing, including the time and place of the accident, injury (death) person's name, sex, age, trades, injuries, injuries. (7) the development of effective preventive measures to prevent such accidents from happening again. (8) education of all personnel of the organization. (9) informed criticism of those responsible. (10) all personnel read out the results, and responsible disposal. (11) maintenance of emergency supplies, maintenance and testing ? strengthening the day-to-day management of the various fire fighting equipment fire-fighting equipment, authorities should be staffed, equipped with fire extinguishers. Fire hydrants identified person responsible for regularly inspecting, testing, at any time in good condition. ? Guard monthly check-fire extinguishers and fire-fighting equipment. ? once every quarter, inspections and tests of a fire hydrant in good condition. 2), plans to develop (1) casualties occurred in construction, such as accidents or accidents of the direct economic