《测绘工程产品价格》国家测绘局2002版

《测绘工程产品价格》国家测绘局2002版 国家测绘局文件 国测财字[2002]3号 关于印发《测绘工程产品价格》和 《测绘工程产品困难类别细则》的通知 各省、自治区、直辖市测绘主管部门，计划单列市测绘主管部门，局所属各单位，国务院各有关部门: 为规范测绘工程产品价格行为，保护测绘工程产品生产单位和用户的合法权益，根据《国家计委财政部关于将部分行政事业性收费转为经营服务性收费的通知》(财综[2001]94号)的精神，我局制定了《测绘工程产品价格》、《测绘工程产品困难类别细则》。现印发给你们，自颁布之日起执行。对于执行中发现的问题，请及时向我们反映。 附件:一、测绘工程产品价格 二、测绘工程产品困难类别细则 二OO二年一月二十八日 抄送:国家计委、财政部、审计署、国家税务总局 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 测绘工程产品价格 一、大地测量 (单位:元，下同) 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 一、大地测量 1.选点:选定点位，检查通1.本表所列为 视，竖旗或立高杆，确定标一、二等选埋价(一)三角、导线测量 高和标石类型，绘点位略格，三、四等选 图，计算图形强度，填写选埋价格减15%。 1、 标石选埋 点手簿及点之记，测区内迁 2.中型标每增加站。 低型标 2米，高型标每 点/座 12051.69 13957.93 15686.71 2.造埋:标石预制，把材料、增加4米，价格中型标 沙石运到点上，清理现场，依次递增10%。 4米/座 20491.08 22749.76 24429.46 定坑位，挖坑架标，投影埋高型标 石，量觇标和标志的高差，19米/座 42915.08 46193.68 48974.29 外部修饰，检查通视，填写2、观测 点之记和办理委托保管，测 区内迁站。 (1)三角一等 点 32863.44 42417.15 53599.36 3.观测:仪器检验，觇标检 二等 查加固，投影，测天顶距和点 7371.55 9204.19 11446.12 水平角，测定归心元素，量三、四等 标高，手簿检查，整理，归点 1940.78 2456.48 2961.27 心计算，编制记簿，拼图形，(2)导线一、二等 测区内迁站。 点 4672.01 6472.75 8692.82 三、四等 点 1114.63 1362.33 1640.21 仪器的野外检验，觇标检测边网按相应(二)电磁波测距 查，测距，记录气象元素，等级导线边价三角起始边一、二等 手簿检查和外业计算，成果格减40%。 条 19067.25 25931.44 31341.17 概算，测区内迁站。 导线边一、二等 条 11567.72 17119.38 21452.53 三、四等 条 4818.26 6629.16 8303.85 (三)重力测量 选定点位，埋设标石，绘点1.当测线边多于 之记、拍摄点位照片，办理点数时，每条多 2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni22005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating- 委托保管。测前准备，起始余的测线边，一 1、标石选埋 点上观测，本点观测，根据 等增加30%的选点、埋标志 点 测绘成果或利用实测方法费用，基本点增3462.31 4442.01 8963.93 确定坐标和高程，编制略加24%的费用。 选点、埋标石 点 10219.41 13247.59 3692.38 图，手簿检查，外业计算， 2.对无人烟区、成果整理，测区内迁站。 2、重力点测定 沙漠腹地等特 困作业地区，另基本点 点 47504.92 54037.00 行核定价格。 一等 点 12910.06 15297.17 3.基本点选埋价 格增加50%。 二等、一等引点 点 6191.69 7806.56 重力加密点 点 1735.36 2720.18 水准点上重力测定 点 533.76 长基线上格值测定 台次 14468.10 短基线上格值测定 台次 2253.66 重力点坐标高程测定 点 4156.04 (四)水准测量 1.选埋:选线选点，实地标1.单线闭合环线 定，坑探(基本点上)，调 减30%。 1、标石选埋 查旧点标志，收集气象、水2.渡河水准按河 文和验潮站资料，选定联测宽划分困难类基本标石 路线，准备材料，预制标石，别:?类河宽, 点 7098.00 8325.83 9270.67 挖坑，埋设标石或标志，量500米，?类河普通标石 标志间高差，设指示桩或示宽500-2000米，点 4833.36 6071.18 6899.87 盘，外部修饰，填写点之记，?类河宽,墙角标志 绘线路图，办理委托保管，2000米。河宽超点 1839.19 测区内迁站。 过3000米时，基岩标石(深度?5米) 每增加1000米，点 30270.36 2.观测:仪器和标志的野外价格在?类价2、水准观测 检查，找点，挖点，观测，格基础上增加 埋点，手簿检查计算，编制20%。 一等 高差表，测区内迁站 3.计量单位以实公里 1363.76 1630.29 1891.63 际测量单程公二等 里数计算。4.跨公里 1149.31 1365.60 1577.43 峡谷、沟壑水准三等 测量参照渡河公里 567.52 734.62 899.43 水准执行。 四等 -Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a3pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join 公里 渡河水准502.36 645.80 787.28 处 38188.80 54244.32 67736.65 (五)全球定位系统 选埋:图上选点，实地标定，铺助点、方位点 绘点之记、环视图，标石制选埋按普通标(GPS)测量 作，挖埋浇灌，标石外部整石价格50%计。 饰，委托保管。 1、标石选埋 观测:计划，准备，观测，基岩标石 点 量天线高，填写手簿，外业 26619.36 29844.45 33069.55 成果整理，检查，搬迁。 基本标石 点 11779.06 14163.47 16547.89 普通标石 点 5919.08 7587.57 8943.17 2、外业观测 点 A级 24432.55 27232.09 31270.03 点 B级 12438.00 14467.05 17115.29 点 C级 4338.43 5957.02 7885.21 点 D级 2855.33 3829.51 5422.89 点 E级 1903.56 2553.00 3512.06 检查分析外业资料，选择平 (六)数据处理 差计算方案，数据准备，上 机解算，精度估算，分析处1、三角、导线点平差 理，成果调制，技术 总结 初级经济法重点总结下载党员个人总结TXt高中句型全总结.doc高中句型全总结.doc理论力学知识点总结pdf ， 整理上交。 一、二等 点 390.99 468.55 526.71 点三、四等 217.01 255.78 313.95 2、水准网平差 一、二等 公里 26.20 33.95 41.70 三、四等 公里 17.40 21.28 3、GPS测量计算 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni42005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 点 1300.16 1494.04 A、B级 点 C、D级 654.81 848.70 4、重力测量计算 基本网 点 5034.27 加密点 点 167.81 工日 5、其它计算 209.76 (七)大地数据库 资料分析、整理、数据、点 之记采集入库，库体建立， 百点 1、三角测量数据库 1665.75 编写数据字典，检查修改。 百点 2、水准测量数据库 1021.66 百点 3、重力测量数据库 44.42 百点 4、GPS测量数据库 12526.43 二、摄影测量与遥感 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 二、摄影测量与遥感 (一)布设对空标志 选点，清理场地，标志制作、 安置 点 1?25000 3401.84 4182.83 4706.28 点 1?10000-1?5000 2387.75 2906.75 3426.27 点 1?2000-1?500 2073.38 2470.00 2731.99 (二)测图控制 选点、埋石立杆、量标高，外1.高级地形控制点测量 1.1? 业观测，成果计算，检查，测50000—解析点 点 3599.01 4966.54 5786.79 区内搬迁。 1?5000 为区域网电磁波测距导线 点 2584.23 3957.00 4781.37 技术设计，像片选点，野外判布点价 读刺点，打桩立旗，外业观测，格，全野等外水准测量 公里 211.89 287.86 392.02 成果计算，像处整饰，绘点位外布点 Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a5pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join- 略图和点位说明，手簿及成果时，增加 2、像片连测 检查整理，填写图历表，测区50%。幅 1?50000 7724.10 10335.22 12946.35 内搬迁。 2.1? 2000-1?幅 1?25000 5324.68 7383.82 9032.59 500为全 野外布点幅 1?10000 3533.99 5040.62 6685.24 价格，区 域网布点幅 1?5000 2528.57 3758.10 4850.21 时，减 30%。 幅 1?2000 2796.30 3758.10 4582.49 幅 1?1000 2131.70 2956.08 3646.60 幅 1?500 1467.30 2282.87 2830.71 (三)像片调绘 幅 绘制调绘范围线，地物、地貌1?50000 27331.96 37657.66 49002.96 1.室内外 的调绘，补测新增地物，量注综合判调幅 1?25000 13535.91 17509.13 21343.83 比高，调查地名和境界，编写减20%。 地名表(少数民族地区)，着墨幅 1?10000 8120.97 10999.81 13196.40 2.全野外整饰，抄接边，检查修改，填 测定碎部写图历表，测区内搬迁。 幅 1?5000 4043.27 6511.73 8289.65 点高程 时，另加幅 1?2000 2472.72 3430.95 4255.33 像片调绘 价格的幅 1?1000 1402.28 1807.99 2083.97 30%。 幅 1?500 729.42 1148.09 1424.62 (四)像片图测图 幅 扩展高程控制网，测绘地貌和1?10000 32601.22 44680.95 56198.06 新增地物、调绘地物和境界，幅 1?5000 21157.21 28576.04 35157.56 调查注记地名，着墨整饰，绘 制高程透写图，抄接边，检查幅 1?2000 8500.01 12101.06 15263.98 修改，资料整理，测区内搬迁。 幅 1?1000 6394.19 9260.66 11871.77 幅 1?500 4384.30 6839.79 8903.07 (五)模拟摄影测量线划地图 晒印像片，空三加密，立体测1?50000 幅 图，编(刻)绘图，检查修改。 8025.79 11462.85 14183.87 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni62005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 幅 1?25000 6161.50 8704.74 10852.90 幅 1?10000 5474.99 8196.02 10344.18 幅 1?5000 4445.57 6438.87 8443.83 幅 1?2000 3843.28 5705.03 7709.99 幅 1?1000 3023.55 4455.66 6317.41 幅 1?500 2625.88 3914.78 5490.11 (六)解析摄影测量 幅 晒印象片，空中三角测量，数若为1?50000 11252.42 18492.08 26737.25 据采集，图形与属性编辑，建CAD产 幅 1?25000 10311.69 14735.92 19160.16 拓扑关系，接边，回放检查，品，价格 修改，原数据制作，刻盘。 减23%。 幅 1?10000 9741.31 13780.83 17820.35 幅 1?5000 8280.12 11713.71 15147.29 幅 1?2000 6175.73 8609.92 12058.37 幅 1?1000 4283.33 6717.53 9760.28 幅 1?500 3938.00 5771.33 8408.37 (七)数字摄影测量 1、数字线划地图(DLG) DLG:资料准备，扫描，空中三1?50000 角测量，影像匹配，平控三维成图航摄 1?50000 分要素数据采集，图形与属性比例尺为 编辑，建拓扑关系，元数据制1? 幅 1?10000 11461.97 18626.70 26814.94 作，回放检查，刻盘。 35000、32 个像对; 幅 1?5000 9842.94 13748.96 17654.99 立体纠正DEM、DOM:资料准1?10000 备，扫描，空中三角测量，影成图航摄幅 1?2000 8326.83 11616.12 14905.40 像匹配，生成DEM单模型，比例尺为 数字微分纠正计算，生成DOM1?35000幅 1?1000 6133.27 8404.27 11707.54 单模型，影像拼接增强，图面时，2个 整饰，回放检查，元数据制作，像对;1?幅 1?500 4182.46 6453.46 9343.82 刻盘记带。 10000成 图航摄比幅 2、数字高程模型(DEM) 3784.00 5478.06 7955.50 单片纠正DOM:资料准备，扫例尺为 描，空中三角测量，内定向，1?200001?50000 后方交会，单片微分纠正，影时，6个 -Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join-Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a7pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236 像数字镶嵌，图面整饰，回放像对。 1?10000 检查，元数据制作，刻盘。 幅 1?5000 4499.83 6950.58 9401.32 3. 1? 卫片DOM:资料准备，多光谱50000和 幅 1?2000 2027.09 3052.67 4078.24 数据融合，精校正，图廓裁切，1?10000 图面整饰，回放检查，元数据成图，像 幅 1?1000 1818.00 2532.10 3252.15 制作，刻盘。 对数每增 (减) 幅 1?500 1329.05 1820.30 2544.00 10%，价 格增(减)幅 3、数字正射影像图(DOM) 770.34 1279.15 2040.03 5%。 幅 1?50000 534.01 1043.62 1702.43 4.DEM 的困难类彩色航片 别按其精 度划分:立体纠正 ?类为三 级精度;单片纠正 ?类为二 级精度;黑白航片 ?类为一 级精度。 立体纠正 幅 10080.54 5.DLG若单片纠正 幅 8307.38 为CAD 卫星图像纠正 产品，价 格减少多光谱数据 幅 5040.27 20%。 全色或单波段数据 幅 4153.69 6.DLG成 图，若需 1?10000 房檐改 正，价格 彩色航片 幅 1594.18 增加 20%。 立体纠正 幅 956.51 7. 1?500单片纠正 —1? 2000DLG黑白航片 为建筑工 业区价立体纠正 幅 6340.83 格，若为 一般地区单片纠正 幅 5442.57 价格减 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni82005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 1?5000 彩色航片 幅 2113.61 黑白航片 幅 1814.19 1?2000—1?500 彩色航片 幅 3184.65 黑白航片 幅 1061.55 幅 2729.67 幅 909.89 三、野外地形数据采集及成图 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 三、野外地形数据采 集及成图 图根控制，野外采集数据，属性 调查，绘示意图，室内编辑，接 (一)数字线划地图 边，回放检查，整理资料。 (DLG) 幅 27306.54 45459.97 72521.73 1?2000 幅 15842.20 27639.66 39437.13 1?1000 幅 9353.67 13456.15 19340.32 1?500 (二)数字高程模型 图根控制，采集高程数据，编辑(DEM) 处理，接连，内插DEM，检查， 幅 1?10000 11448.31 15638.23 21906.77 资料整理。 幅 1?5000 9092.84 11637.76 16261.28 幅 1?2000 6649.09 9092.00 12722.67 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a9pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join-Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 四、地图编制 产品名称 计 量 价 格 主要工作内容 说 明 ? ? ? 单 位 四、地图编制 熟悉编辑指示，制定编图计划，(一)地形图 编写图幅编绘说明，基本资料 加工，增补现势资料，展绘图1、编绘 廓、坐标网、控制点，兰图拚 帖，编制图例及各要素指标图， 幅 1?1000000 12680.88 20713.67 26847.81 编绘各要素，书写注记，抄接 边，图廓外整饰，填写图历簿，幅 1?500000 9764.55 15898.73 21010.50 检查，修改。 幅 1?250000 9326.48 15022.43 19403.96 幅 1?100000 6118.08 9185.12 11667.97 幅 1?50000 5533.86 7578.55 9696.28 幅 1?25000 4803.56 6630.64 8308.84 幅 1?10000 4073.38 5825.98 7213.46 幅 1?5000 3050.97 4803.62 6264.12 幅 1?2000 1845.28 4073.59 5546.99 幅 1?1000 1559.66 2946.87 4160.87 2、清绘(刻绘) 幅 1?1000000 7948.08 14374.31 18609.81 幅 1?500000 6522.65 11634.39 15139.61 熟悉编辑指示，准备工作，编 注记表，分版或一版清(刻)幅 1?250000 6227.14 10246.91 13094.93 绘各要素，剪贴注记，抄接边， 作分色样图，填写图历簿，检幅 1?100000 3928.79 6194.45 7894.35 查，修改。 幅 1?50000 3490.59 5316.25 6849.80 幅 1?25000 2906.38 4732.04 6119.54 2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni102005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating- 幅 2614.28 4220.89 5535.32 1?10000 幅 1?5000 2176.13 3271.54 4513.00 幅 1?2000 1733.44 2860.18 3986.89 幅 1?1000 1213.40 2080.13 2946.87 幅 1?500 866.73 1300.06 1906.78 3、连编带绘(刻) 幅 1?1000000 14141.40 23488.63 30572.08 幅 熟悉编辑指示，制订编图计划，1?500000 10786.93 18016.47 23858.52 编写图幅技术说明，增补现势 幅 1?250000 10490.09 16921.11 22032.88 资料，展绘图廓、坐标网、控 制点，兰图拚贴，编制图例及 幅 1?100000 7286.47 11521.93 14954.13 各要素指标图，做各要素草图， 连编带绘(刻)各要素，编注 幅 1?50000 6264.05 9185.11 12106.14 记表，剪贴注记，抄接边，做 分色样图(或做撕膜版)，填写幅 1?25000 5533.86 7872.28 10061.46 图历簿，检查，修改。 幅 1?10000 5095.66 6848.33 8673.96 (二)普通地理图 编制:熟悉编辑指示，收集、1、全国图、世界图 1.计量单位为 整理、分析、增补制图资料，图上面积; 编绘 平方分米 433.54 866.72 1343.45 基本资料加工，展绘图廓、坐 2.图集图册编标网，拚贴兰图，编绘地图各 清绘 平方分米 234.03 468.07 728.08 绘加15%; 要素，书写注记，绘制图例， 整饰，填写图历簿，检查，修2、省、市、自治区图 3.连编带绘改。 (刻)按编绘 编绘 平方分米 303.29 585.00 906.43 价格的120%清绘:与地形图清绘(刻绘) 计。 相同。 清绘 平方分米 173.35 337.97 546.03 3、地、县、乡图 编绘 平方分米 242.76 390.12 528.75 清绘 平方分米 156.04 246.89 337.97 (三)数字制图 ts, welding engineering2005 steel fusion welded butt join-Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a11pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345- 平方分米 原稿准备(不含原稿编篡)，扫 363.31 462.14 659.77 1、普通地理图 描，图形处理，分层矢量化， 2、地形图 符号化，编辑整理，回放校对， 检查修改，输出印刷胶片。 幅 1?5000 2327.34 4452.92 6578.50 幅 1?2000 1660.14 3592.49 5524.84 幅 1?1000 1156.93 2123.11 3089.28 五、地图数字化 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 五、地图数字化 (一)数字线划地图 资料准备，预处理，扫描、1.系全要素 手扶数字化，图形编辑，采集。 (DLG) 绘审校草图，接边，属性 2.DLG若为数据录入，建拓扑关系， 幅 1?1000000 11686.98 25798.35 39909.74 CAD产品，建符号库，压缩存储，刻 价格减少盘，绘图。 幅 1?250000 11245.46 24975.46 38896.14 20%。 1?50000 彩图 幅 9603.45 18824.12 27660.60 1?50000 分要素二底图 幅 8004.80 14728.20 21451.62 幅 1?10000 5806.60 8688.06 11569.51 幅 1?5000 4997.04 7504.32 10011.62 幅 1?2000 3423.57 5352.25 7280.93 幅 1?1000 2505.77 3855.85 5591.67 幅 1?500 1617.01 2774.21 4124.29 (二)数字高程模型 资料准备，地貌及相关水 涯线扫描，细化，矢量化， 2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni122005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating- 赋高程值，采集离散高程 (DEM) 点，坐标转换，TIN内插， 幅 1?1000000 5611.96 10786.70 16153.09 DEM生成，检查修改，刻 盘，绘图。 幅 1?250000 5185.45 10360.21 15726.60 1?50000 彩图 幅 3216.55 6295.40 9181.81 1?50000 分要素二底图 幅 2520.32 4829.45 7138.58 幅 1?10000 1799.70 2954.26 3916.39 幅 1?5000 1355.87 2318.01 3280.15 (三)数字栅格地图 (DRG) 资料准备，坐标系转换，1:1000000-1:250000 扫描，影像预处理，色彩 归化，几何纠正，裁切拼彩图 幅 1660.43 接，图例处理，图廓注记 叠合，元数据生成，绘图，分要素二底图 幅 996.26 检查，数据压缩存贮，刻 盘。 1?100000-1?10000 彩图 幅 1217.65 分要素二底图 幅 664.17 幅 1?2000-1?500 461.12 六、数字化数据入库 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 六、数字化数据入库 (一)地形数据库 入库数据检查，数据整理，投影转 换，数据库体建立，检查，编写数 据字典。 ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a13pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join-Eight, should perform in the construction standards and specifications, serial number a 1 GB3323 幅 2988.92 1?1000000 幅 1?250000 2717.20 幅 1?50000 1902.05 幅 1?10000 1086.89 幅 1?2000 626.76 幅 1?1000 470.07 幅 1?500 313.38 (二)高程模型数据库 幅 入库数据检查，数据整理，投影转1?1000000 1130.89 换，数据库体建立，检查，编写数 幅 1?250000 904.72 据字典。 幅 1?50000 581.46 幅 1?10000 232.58 (三)地名数据库 幅 入库数据检查，部分数据项自动生1?1000000 662.80 成，数据整理，数据库体建立，编 幅 1?250000 662.80 写数据字典。 幅 1?50000 460.52 幅 1?1000 230.25 (四)正射影像数据库 幅 入库数据检查，影像拼接，数据整1?250000 710.40 理，数据库体建立，编写数据字典。 幅 1?50000 473.60 幅 1?10000 204.76 幅 1?2000 77.72 七、界线测绘 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni142005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 七、界线测绘 (一)地籍测绘 控制测量，界址点测量，地不含地籍 籍要素数据采集编辑，面积调查费用。 平方公里 1?2000 182037.48 227142.79 292223.77 量算，地籍图(含宗地)绘 制，检查修改，成果整理。 平方公里 1?1000 204733.62 255367.63 328166.44 平方公里 1?500 227527.11 284264.50 372196.76 (二)房产测绘 控制测量，界址点测量，地?类:住宅 平方公里 1?1000 245516.16 306441.15 384605.44 籍调绘，面积量算，分幅平用户;? 面图测绘，分丘平面图绘类:商业楼 平方公里 1?500 272773.37 339706.14 425793.69 制，检查修改，资料整理用户;? 类:多功能(1?1000、1?500房产测分户图 平方米 1.36 2.04 2.72 绘不含房产调查和分户图综合楼用 绘制费用)。 房。 分层分户平面图测绘，房产 调查，分户面积、共有面积、 分摊面积测算，检查修改， 资料整理。 (三)境界测绘 收集资料，界点测定，界点省、市、县界 公里 3320.49 4032.12 4743.76 摄影，填写界桩登记表，连 界地物地貌修测，连界线标 绘，绘边界 协议 离婚协议模板下载合伙人协议 下载渠道分销协议免费下载敬业协议下载授课协议下载 书附图，编 写边界走向和界桩位置说 明，检查修改，资料整理。 八、工程测量 计 量 价 格 产品名称 主要工作内容 说 明 ? ? ? 单 位 八、工程测量 (一)控制测量 准备工作，选点，埋适用于市政 石，观测，测定气象工程控制测 二等三角 点 7705.15 11719.69 17352.87 元素，绘点之记，计量。 算。 三等三角 点 5290.13 7924.18 11135.76 水准测量以 实际测量的 四等三角 点 2828.10 4160.91 5475.72 单程公里数 Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a15pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join- 点 计算。 一、二级小三角1216.26 1872.99 2442.14 一、二、三级导线 公里 2976.40 6378.30 9567.35 B级以上按 大地测量中三等电磁波测距导线 点 3941.63 6359.10 9081.75 GPS测量价 格计算。 四等电磁波测距导线 点 2262.10 3661.72 5061.33 二、三、四等水准选埋 点 1016.88 1509.51 2061.63 二等水准测量 公里 837.61 1164.93 1728.54 三、四等水准测量 公里 522.10 675.85 842.70 等外水准测量 公里 250.74 378.98 486.05 GPS测量 点 C级 6221.23 8488.39 10755.53 点 D级 5269.61 7212.01 9154.40 点 E级 4683.79 6360.78 7983.47 (二)平板仪测图 图根点控制测量，碎一般地区 部测量，着铅，检查 修改，成果整理。 平方公里 1?2000 12326.65 19845.22 29154.30 平方公里 1?1000 27964.89 46750.20 66181.92 平方公里 1?500 77267.44 127901.81 179387.50 建筑、工业区 平方公里 1?2000 23489.01 40030.52 57801.46 平方公里 1?1000 58817.80 92916.14 131792.30 平方公里 1?500 159890.53 226992.29 301456.34 幅 1?200 1456.48 1893.43 2621.67 (三)管线测量 布设图根导线，引测计量系按管 竣工测量 公里 4206.88 5757.97 7896.38 水准，测管线起点、线长度累计 折点、交点、终点、计算(不足 specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni162005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering- 公里 分支点、变坡点和变管线探测8119.00 12683.23 17247.47 0.5公里时以 径点的座标和高程，0.5公里计)。 管线调查，管线探 测，资料整理，计算， 展点，清绘，绘略图， 写说明，检查修改。 (四)滩涂测量 准备、控制，测深， 平方公里 1?10000 19376.11 25534.12 31692.14 测障碍物，验潮，修 测岸线，绘图，检查 平方公里 1?5000 32059.13 40823.32 50000.30 修改，整理成果。 平方公里 1?2000 41345.20 54286.74 67228.28 平方公里 1?1000 63469.27 88175.71 112882.16 平方公里 1?500 199045.18 239820.09 284167.35 (五)水下地形测量 资料准备，定位，测计量按断面 1.浅海(水深5-30米) 深，验潮，导航，资宽度累计计 测量 料整理，数据录入， 算。 处理，潮汐改正，坐 平方公里 1?10000 23364.24 标改正，编辑，注记 整饰，绘图，检查修 平方公里 1?5000 41205.48 改，整理成果。 平方公里 1?2000 58622.19 检校仪器，展点，确 定测站位置，测注高平方公里 1?500 389352.71 程点，测绘水连线及 水下地形，接边，整扫海 平方公里 471458.64 饰，外业资料检查整 理，测区内迁站。 2.河湖测量 准备工作，检校仪平方公里 1?10000 16494.19 器，测量断面点的位11303.10 21685.28 置和高程，整理计平方公里 1?5000 35682.75 算，编制成果表，绘21195.51 45959.85 制断面图和平面图，平方公里 1?2000 58229.02 检查修改，着墨整37214.26 79243.78 饰，编写资料说明，平方公里 1?1000 103796.67 测区内迁站。 65553.07 142040.27 平方公里 1?500 269298.08 170817.60 3667778.56 纵断面中心导线测 量，纵横断面测量，3.河道断面测量 资料整理，编制成果 -Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a17pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join 公里 表，绘制纵横断面图 2749.04 (1)纵断面1?10000 及检校，测区内迁 (2)横断面 2404.49 3287.26 移。 平均宽度200米以内 公里 1?10000 7106.87 公里 1?2000 5688.61 8974.66 8776.22 平均宽度200-500米 6751.07 11198.23 公里 1?10000 6218.51 公里 1?2000 5461.49 8158.78 8152.62 平均宽度500-1000米 5954.49 10027.84 公里 1?10000 5774.34 公里 1?2000 4384.98 6527.02 7411.47 平均宽度1000-200004864.16 8022.27 米 公里 5551.15 1?10000 公里 3913.13 5969.21 6278.98 1?2000 4480.35 7122.85 平均宽度2000米以上 公里 4625.96 1?10000 公里 3196.63 5116.47 6086.03 1?2000 公里 3816.36 9788.76 6955.47 (3)淤积断面1?2000 7534.12 12043.42 4.渠、堤测量 公里 2272.29 (1)纵断面1?10000 1747.93 3495.81 (2)横断面 平均宽度200米以内 公里 1923.60 -specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni182005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering 公里 1346.52 2596.86 3318.21 1?10000 1?2000 1827.42 4376.19 公里 平均宽度200—500米 2693.04 公里 1?10000 1885.13 3635.60 4645.50 1?2000 2558.39 6126.66 公里 平均宽度500-800米 3270.12 公里 1?10000 2289.08 4414.66 5640.96 1?2000 3106.61 7439.52 (六)市政工程测量 不足0.5公 踏勘，选线，定线(不里以0.5公 公里 1、工程线路测量 4897.12 6804.20 12452.97 含纵横断面施测)，里计。 检校仪器，测定起 公里 2、 规划 污水管网监理规划下载职业规划大学生职业规划个人职业规划职业规划论文 道路定线 3627.49 4586.28 5545.06 点，终点，折点，交 点，方向点，测曲线， 联测条件座标，计算 数据，绘中线示意 图，编制成果表，资 料整理，编写施测报 告，检查修改。 踏勘，准备资料，补 充控制点，拨地钉 桩，钉方向桩。联测 条件座标，计算导 线，计算垂距，解算 交点坐标，检查验 收，整理资料，抄录 成果通知单。 (七)变形测量 组工日 踏勘，技术设计，埋 2454 4265 1.班组定员5 石(沉降观测点)，人。 观测(含定期观测)， 2.?类系指内为计算，绘制形变 从基础层开曲线图，编写说明， 始测量。 检查修改，资料整 理。 (八)其它 仪器检验，踏勘，选1.人防工事 点，测角，测距，测宽度按10m -ment 4 HGJ2222002 industrial pipe welding engineering code for construction and acceptance of field equip-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-Ray lighting and quality rating of 2 GB11345-ts, welding engineering2005 steel fusion welded butt join-Eight, should perform in the construction standards and specifications, serial number a 1 GB3323ed as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. 1000 punishment. (5) significant near miss should be attempt-in serious consequences, the pursuit of leadership, along with 500 ceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting100 economic sanctions against them. (4) to con-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-th by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt wi10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-levant Department. (2) personal injury accident occurred, the direct punishment 0.5the recorresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or ccident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the a fine of 100 Yuan. 7.5.3 a19pressure vessel 2005-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 高，测细部点座标，考虑，宽度 件(4点) 2594.32 1、建筑用地拨地定桩 内业计算，绘制平面小于10m 件 2、建筑物放线 2594.32 位置图，提交图纸资时，价格增 料。 加30%。 公里 3、人防洞室(含天2030.75 2964.66 3898.58 然洞穴)测量 2.长度不足 0.5公里时以 点 4、极坐标细部点测量 60.00 0.5公里计。 89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-of 2 GB11345 Ray lighting and quality rating-2005 steel fusion welded butt joints, welding engineering-specifications, serial number a 1 GB3323 truction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and cons-ong with 500e, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, al100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or fals-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-onal injury accident occurs, the direct punishment 500ing administrative sanctions should be dealt with by the personnel Department of the company. (3) pers10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concern-d, the direct punishment 0.5ccurrecerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident oshed 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as cona fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly puni202005 pressure vessel-2000 8 JB4730-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2004 petrochemical JB/ T4708-aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525 92 technical specification for welding of-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-