王瓜店街道中心小学创建示范市总索引2

王瓜店街道中心小学创建示范市总索引2王瓜店街道中心小学创建示范市总索引2 第 1 盒 (A1教育地位和办学方向———B1教育地位) 卷数文件题目备注国家中长期教育改革和发展纲要第1卷肥城市人民政府关于贯彻落实国家省《中长期教育改革和发展规第2卷 2011 划纲要》的实施意见关于贯彻《肥城市中长期教育改革和发展规划纲要(2011——2020年)》2011 第3卷的实施细则张瑞东同志在全市贯彻落实全教会精神区域推进教育事业均衡快第4卷 2010 速发展大会上的讲话单传海同志在全市贯彻落实全教会精神区域推进教育...

王瓜店街道中心小学创建示范市总索引2 第 1 盒 (A1教育地位和办学方向———B1教育地位) 卷数文件题目备注国家中长期教育改革和发展纲要第1卷肥城市人民政府关于贯彻落实国家省《中长期教育改革和发展规第2卷 2011 划纲要》的实施意见关于贯彻《肥城市中长期教育改革和发展规划纲要(2011——2020年)》2011 第3卷的实施细则张瑞东同志在全市贯彻落实全教会精神区域推进教育事业均衡快第4卷 2010 速发展大会上的讲话单传海同志在全市贯彻落实全教会精神区域推进教育事业均衡快2010 第5卷速发展大会上的讲话张成伟同志在全市贯彻落实全教会精神暨创建省教育示范市推进第6卷 2011 工作会议上的讲话张莉同志 2011 第7卷在全市教育工作会议上的讲话肥城市教育事业十二五规划改革和发展规划第8卷第9卷王瓜店镇政府工作报告、邹家强同志第26个教师节讲话 2010 王瓜店镇政府工作报告、桑逢智同志第25个教师节讲话 2009 第10卷王瓜店镇政府关于表彰尊师重教先进单位、教书育人先进单位和第11卷 2008 优秀教师的决定 2010年肥城市教育工作计划第12卷第 2 盒 (A1教育地位和办学方向———B1教育地位) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注《国家中长期教育改革和发展规划纲要》第1卷学习记录第 3 盒 (A1教育地位和办学方向———B1教育地位) 卷数文件题目备注第1卷中华人民共和国义务教育法中华人民共和国教师法第2卷第3卷国家中长期教育改革和发展规划纲要学校发展规划(2004-2007)(2007-2010) 第4卷德育工作十一五规划第5卷第6卷中心小学贯彻落实省40条方案 2008年度学校、部门工作计划第7卷第8卷 2009年度学校、部门工作计划 2010年度学校、部门工作计划第9卷第 4 盒 (A1教育地位和办学方向———B2办学方向) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录国家中长期教育改革和发展规划纲要第1卷第2卷山东省中小学管理基本规范山东省义务教育地方课程和学校课程实施纲要第3卷肥城市王瓜店关于教育事业十二五发展规划第4卷肥城市教育局关于印发姚霆局长第5卷在全市课程与教学工作会议上的讲话王瓜店中心小学管理制度汇编第6卷第7卷中心小学办学理念中心小学素质教育实施方案第8卷中心小学素质教育双高工程实施方案第9卷第10卷中心小学规范办学行为和实施素质教育的规定中心小学教学标准化学校创建工作报告第11卷第12卷王瓜店小学办学水平综合评估方案第 5盒 (A1教育地位和办学方向———B2办学方向) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire3 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 泰安市人民政府关于全面推进中小学素质教育的意见第1卷泰政发【2008】20号王瓜店镇人民政府关于大力推进素质教育的决定第2卷第3卷规范办学行为承诺制度教师施教行为责任书第4卷素质教育责任书第5卷减负责任书第6卷第 6盒 (A1教育地位和办学方向———B2办学方向) 卷数文件题目备注第1卷中心小学落实《山东省中小学基本管理规范》实施方案第2卷教师考核制度、评价方案作业审批制度第3卷 2008-2009教师考核细则、统计表第4卷 2009-2010教师考核细则、统计表第5卷 2009-2011教师考核细则、统计表第6卷第 7盒 (A1教育地位和办学方向———B2办学方向) 卷数文件题目备注第1卷中心小学班主任排座制度 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录控辍保学责任书、禁止体罚和变相体罚责任书 2010.03 第2卷第3卷控辍保学责任书 2010.09 中心小学教师行为全面实施素质教育责任书第4卷教师施教行为责任书第5卷第6卷新课程理念之学生家长一封信第 8盒 (A1教育地位和办学方向———B3教育体制) 卷数文件题目备注山东省人民政府关于贯彻国发【2001】21号文件精神推动基第1卷础教育改革与发展的意见泰安市人民政府关于加快农村教育改革与发展的意见第2卷泰政发【2004】3号肥城市人民政府关于加快农村教育改革与发展的意见第3卷肥政发【2004】22号肥城市人民政府关于实施农村义务教育经费保障机制改革的第4卷通知关于加快推进义务教育均衡发展的意见第5卷王政发【2007】27号文1 第 9盒 (A1教育地位和办学方向———B3依法治教) 卷数文件题目备注相关教育法律第1卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire5 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 2008年依法治教实施材料第2卷 2009年依法治教实施材料第3卷第4卷 2010年依法治教实施材料第5卷 2011年依法治教实施材料第 10 盒 (A2—B7免费政策) 卷数文件题目备注 2008年春季教材订单、免费教材发放花名册第 1卷 2008年秋季教材订单、免费教材发放花名册第 2 卷第 11 盒 (A2—B7免费政策) 卷数文件题目备注第 1卷 2009年春季教材订单、免费教材发放花名册第 2 卷 2009年秋季教材订单、免费教材发放花名册第 12 盒 (A2—B7免费政策) 卷数文件题目备注第 1卷 2010年春季教材订单、免费教材发放花名册 2010年秋季教材订单、免费教材发放花名册第 2 卷第 13 盒 (A2—B7免费政策) 卷数文件题目备注 2011年春季教材订单、免费教材发放花名册第 1卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 14 盒 (A2—B8公用经费) 卷数文件题目备注 2008年拨入公用经费第 1卷第 2 卷 2009年拨入公用经费第 3 卷 2010年拨入公用经费第 15 盒 (A2—B9资助学生政策) 卷数文件题目备注 2008年救助贫困学生制度、方案、登记表总结第 1卷 2008年手拉手向抗震希望小学捐队报第 2 卷第 3 卷 2008年汶川大地震捐款活动第 16 盒 (A2—B9资助学生政策) 卷数文件题目备注 2009年救助贫困学生制度、方案、登记表总结第 1卷 2009年“助残日”捐款情况第 2 卷第 3 卷 2009年爱心捐款活动第 17 盒 (A2—B9资助学生政策) 卷数文件题目备注第 1卷 2010年救助贫困学生制度、方案、登记表总结 2010年“爱心助残”活动第 2 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire7 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 18 盒 (A2—B11教育经费管理) 卷数文件题目备注第 1卷 2008年预算机构、预算编制基表 2008年资产负债表第 2 卷第 3 卷 2008年台账第 4 卷 2008年拨款凭证单据复印件 2008年预算机构、预算编制基表第 5 卷第 19 盒 (A2—B11教育经费管理) 卷数文件题目备注 2009年预算机构、预算编制基表第 1卷 2009年资产负债表第 2 卷第 3 卷 2009年台账 2009年拨款凭证单据复印件第 4 卷第 20 盒 (A2—B11教育经费管理) 卷数文件题目备注 2010年预算机构、预算编制基表第 1卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录 2010年资产负债表第 2 卷第 3 卷 2010年台账 2010年拨款凭证单据复印件第 4 卷 2011年预算机构、预算编制基表第 5 卷第 21 盒 (A2—B11教育经费管理) 卷数文件题目备注第 1卷 2008年经费管理组织机构、管理制度 2008年治理乱收费领导机构及责任书第 2 卷 2008年学生作业费第 3 卷第 22 盒 (A2—B11教育经费管理) 卷数文件题目备注 2009年经费管理组织机构、管理制度第 1卷 2009年治理乱收费领导机构及责任书第 2 卷 2009年学生作业费第 3 卷第 23 盒 (A2—B11教育经费管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire9 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1卷 2010年经费管理组织机构、管理制度 2010年治理乱收费通知及责任书第 2 卷第 3 卷 2010年学生作业费 2010年治理乱收费方案等第 4 卷 2011年经费管理组织机构、管理制度第 5 卷第 6 卷 2011年春季学生作业费第 24 盒 (A2—B11教育经费管理) 卷数文件题目备注上级有关经费保障规定、文件第 1卷第 25 盒 (A3———B12教育教学思想) 卷数文件题目备注班主任排座制度第 1卷第 2卷学习习惯培养方案、计划、措施、学生名单、辅导记录学困生帮扶计划、转化方案第 3卷第 4卷学困生帮扶计划、转化总结、记录 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录任课教师帮扶计划第 5卷第 6卷学困生名单、学困生个案跟踪辅导纪录清明念英烈、敬老院的笑声第 7卷入学规定、义务教育课程设置方案。第 8卷第 9 卷教师师德素养学生问卷教师师德素养学生问卷第 10 卷第 11 卷社会实践活动计划、记录、掠影。 2010年教科研工作计划、秋教秋学秋练实施方案、总结、第 12 卷常规检查、课程评价方案第 26 盒 (A3———B12教学教学思想) 卷数文件题目备注肥城市小学教学工作评估办法、方案第 1 卷管理制度汇编第 2卷第 3 卷学校管理制度汇编学校五年发展规划第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire11 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 5 卷校训校风、办学目标、理念学校工作计划第 6 卷第 7 卷教导处工作计划学校各项工作计划(教导处、总务处、少先队、安全) 第 8 卷学困生转化工作制度、帮扶计划、实施方案、工作总结第 9 卷第 10 卷任课教师对学困生的帮扶记录学困生名单第 11 卷第 12 卷学困生帮扶记录第 27 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷校园文化规划、方案等第 2 卷校园文化工作计划，方案第 3 卷校园文化建设督查制度第 4 卷办公室文化建设评比方案 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 5 卷环境教育课堂渗透第 6 卷板报评比通知及成绩第 7 卷班级文化大赛第 28 盒 (A3———B13学校管理) 卷数文件题目备注第 1卷校园文化计划、方案第 2卷校风、校训征集活动第 3卷环境教育课堂渗透第 4 卷校风校训征集登记表第 5卷班级文化大赛第 6 卷环境保护教育第 7 卷祖国在我心中板报评比第 29 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷校园文化建设规划 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire13 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷校园文化督查制度办公室评比等第 3 卷校园文化宣传工作系统表，宣传掠影第 4 卷班级建设计划第 5 卷班级文化大赛第 6 卷班级文化大赛第 7 卷班级文化大赛活动第 8 卷班报第 9 卷校刊《曙光》第 10 卷环境教育渗透教案第 30 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷创建绿色学校决定、计划等第 2 卷绿色学校财务报告第 3 卷环保教育工作计划、总结、创建绿色学校措施等第 4 卷环境教育课堂渗透第 5 卷家长参与创建绿色学校活动掠影第 6 卷学校内部环保规章制度 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 7 卷绿色班级创建计划第 8 卷创建绿色学校活动掠影第 9 卷环境教育领导分工，计划等第 10 卷学校绿化方案第 11 卷环境教育第12 卷环境教育手抄报第 13 卷绿色环保掠影第 31 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷校园文化建设方案，督查制度等第 2 卷校园环境自查整治表第 3 卷校园文化(卫生) 第 4 卷板报评比第 5 卷校园环境设计掠影第 6 卷校园环境设计方案第 32 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire15 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷安全应急预案第 2 卷管理制度汇编功能是规章制度第 3 卷第 33 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷开学初安全教育校长讲话10.9 第 2 卷开学初安全演练材料10.9 第 3 卷 2010年12月安全演练材料第 4 卷学习《中小学幼儿园安全管理办法》心得体会10.10 第 34 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷教师安全责任书10.3 镇与学校签订的安全责任书第 2 卷部门安全责任书第 3 卷第 4 卷安全工作计划、“一岗双责”10.10 第 35 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录端午节致家长的一封信10.6 第 1 卷第 2 卷端午节安全教育班会记录第 36 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷学生在校安全目标责任书10.3 第 37 盒 (A3———B13学校管理) 卷数文件题目备注中秋、国庆节安全教育班会记录10.9 第 1 卷第 2 卷暑假前安全教育材料10.7 第 38 盒 (A3———B13学校管理) 卷数文件题目备注森林防火教育班会记录10.3 第 1 卷森林防火教育学生手抄报第 2 卷第 39 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷 “安全生产月”学生自做安全祝福卡第 40 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire17 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注 “安全生产月”学生做安全手抄报10.6 第 1 卷第 41 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷 “安全生产月”活动方案、演练图片、讲话稿、总结10.6 “安全生产月”学生演练体会第 2 卷第 3 卷 “安全生产月”暑假前安全教育学生体会 “安全生产月”常规安全管理班会记录第 4 卷 “安全生产月”班级安全自查表第 5 卷第 6 卷安全教育日活动材料第 42 盒 (A3———B13学校管理) 卷数文件题目备注教师安全目标责任书10.9 第 1 卷学生在校安全责任书第 2 卷第 3 卷部门安全责任书第 43 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注第 1 卷消防安全日活动资料第 44 盒 (A3———B13学校管理) 卷数文件题目备注 “安全生产月”文明出行致家长的一封信10.6 第 1 卷第 45 盒 (A3———B13学校管理) 卷数文件题目备注寒假致学生家长的一封信10.1 第 1 卷第 46 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷 “五一”节前安全教育班会记录10.4 “清明节”致学生家长的一封信第 2 卷第 3 卷 “清明节”安全教育班会记录安全教育日活动资料10.3 第 4 卷 “五一”节致学生家长的一封信10.5 第 5 卷第 47 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire19 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷安全工作上级文件10.8-10.12 安全工作上级文件第 2 卷第 3 卷夜间治安巡逻值班表安全隐患排查表第 4 卷安全防范(人防、物防、技防)统计表第 5 卷第 6 卷学校开学初安全自查表特殊学生(家长)排查表第 7 卷第 48 盒 (A3———B13学校管理) 卷数文件题目备注开学初安全演练通知、方案、图片10.3 第 1 卷安全演练总结第 2 卷开学初安全教育班会记录第 3 卷第 4 卷开学初安全教育班主任发言稿第 5 卷安全演练班会记录第 49 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 1 卷 “珍爱生命，关注安全”班会记录10.12 第 2 卷元旦假期安全教育班会记录第 3 卷 “珍爱生命，关注安全”致家长的一封信第 50 盒 (A3———B13学校管理) 卷数文件题目备注暑假安全教育致家长的一封信10.7 第 1 卷第 51 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷确保学生安全致家长的一封信10.5 第 52 盒 (A3———B13学校管理) 卷数文件题目备注肥城市学校幼儿园安全规范管理指导手册10.8 第 1 卷教职工安全教育培训计划及培训光盘10.9 第 2 卷第 53 盒 (A3———B13学校管理) 卷数文件题目备注安全工作上级文件10.4 第 1 卷第 2 卷门卫安全工作应急预案10.5 门卫进出入登记09-10 第 3 卷第 54 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire21 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注安全演练手抄报10.9 第 1 卷第 2 卷学生演练体会第 55 盒 (A3———B13学校管理) 卷数文件题目备注学校消防自查日志09-11 第 1 卷第 2 卷学校自查现场记录08-11 第 56 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷 “安全生产月”交通安全小作文10.6 第 57 盒 (A3———B13学校管理) 卷数文件题目备注安全工作上级通知、文件第 1 卷第 2 卷安全工作上级通知、文件09.2-09.12 第 58 盒 (A3———B13学校管理) 卷数文件题目备注森林防火教育学生小作文09.2 第 1 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录森林防火教育学生致父母的一封信第 2 卷第 3 卷森林防火教育学生手抄报第 59 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷开学初安全演练资料09.2 “安全生产月”安全演练资料09.6 第 2 卷第 3 卷开学初安全演练资料09.9 第 60 盒 (A3———B13学校管理) 卷数文件题目备注清明节安全教育致家长的一封信09.4 第 1 卷 “五一”节安全教育致家长的一封信09.4 第 2 卷第 3 卷国庆、中秋安全教育致家长的一封信09.9 寒假安全教育致家长的一封信09.1 第 4 卷第 61 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷 “安全生产月”活动资料09.6 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire23 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷暑假前安全教育班会记录09.7 开学初安全教育资料09.9 第 3 卷第 4 卷国庆、中秋节安全教育班会记录雪天安全教育班会记录 09.12 第 5 卷湖南踩踏事故安全教育材料第 6 卷第 62 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷学校工作计划、安全工作计划09.1 教师值日巡查、护送学生制度材料09.2 第 2 卷学校安全工作计划、“一岗双责”09.9 第 3 卷第 4 卷安全制度汇总安全预案汇总第 5 卷第 6 卷消防安全日活动资料09.11 安全工作总结09.12 第 7 卷第 63 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 1 卷冬季安全自查方案、报告09.11 班级、学校安全隐患自查表09.9 第 2 卷第 3 卷乡镇现场检查记录09.3 第 64 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷安全教育“四落实”09.2 第 2 卷安全教育“四落实”09.9 第 3 卷安全教育备课09.2 第 65 盒 (A3———B13学校管理) 卷数文件题目备注镇与学校签订的安全目标责任书09.2 第 1 卷第 2 卷学校与处室签订的安全目标责任书学校与教师签订的安全目标责任书第 3 卷学校与教师签订的食品卫生安全目标责任书09.3 第 4 卷第 5 卷学校与处室签订的安全目标责任书09.9 学校与教师签订的安全目标责任书第 6 卷第 7 卷学校与学生签订的在校安全目标责任书09.2 第 66 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire25 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注暑假安全教育致家长的一封信09.6 第 1 卷第 2 卷学生在校安全目标责任书09.9 第 67 盒 (A3—B13学校管理) 文件题目备注卷数第 1 卷法律法规08.9 学校安全备案08.3表第 2 卷第 68 盒 (A3—B13学校管理) 文件题目备注卷数第 1 卷安全工作计划、“一岗双责”08.9 安全制度汇编08.9 第 2 卷安全预案汇总08.6 第卷第 69 盒 (A3———B13学校管理) 卷数文件题目备注肥城市安全工作通知、文件08.4 第 1 卷第 2 卷王瓜店教育办公室通知08.5 第 70 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注第 1卷安全班会记录08.2-08.6 第 71 盒 (A3———B13学校管理) 卷数文件题目备注安全教育日活动资料08.2 第 1 卷第 2 卷安全教育日学生手抄报08.3 消防安全日活动资料08.11 第 3 卷暑假安全教育资料08.7 第 4 卷第 5 卷冬季安全自查资料08.11、12 寒假护校资料 08.2 第 6 卷第 72 盒 (A3———B13学校管理) 卷数文件题目备注学校与处室、教师签订的安全责任书08.2 第 1 卷第 2 卷学校与处室、教师签订的安全责任书08.9 第 73 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire27 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷学校工作计划08.9 第 2 卷安全工作计划08.2 安全工作总结08.6 第卷安全工作总结、教师考核表08.12 第卷第 74 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷学校与运动员签订的安全责任书08.5、6 第 2 卷清明节安全教育致家长的一封信08.4 第 75 盒 (A3———B13学校管理) 卷数文件题目备注学校消防自查日志06-08 第 1 卷班级安全自查记录08.12 第 2 卷镇安全检查现场记录08.3 第卷第 76 盒 (A3———B13学校管理) 卷数文件题目备注安全教育“四落实”资料08.09 第 1 卷第 77 盒 (A3———B13学校管理) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 1 卷安全演练资料08.2 安全演练资料08.5 第 2 卷安全演练资料08.9 第 3 卷第 78 盒 (A3———B13学校管理) 卷数文件题目备注安全教育“四落实”08.2 第 1 卷安全教育教学计划第 2 卷安全教育备课第 3 卷第 79 盒 (A3———B13学校管理) 卷数文件题目备注安全教育备课08.2 第 1 卷第 80 盒 (A3———B13学校管理) 卷数文件题目备注安全教育备课08.9 第 1 卷第 81 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷国庆节致学生家长的一封信08.9 学生在校安全责任书08.9 第 2 卷第 82 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire29 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注 “五一”节致学生家长的一封信08.4 第 1 卷第 2 卷暑假安全教育致家长的一封信08.6 中秋节安全教育致家长的一封信08.9 第卷第 83 盒 (A3———B13学校管理) 卷数文件题目备注安全制度汇编10.2 第 1 卷创建“平安校园”定期查勘监测制度10.5 第 2 卷第 84 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷创建“平安校园”工作上级文件10.5 第 85 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷创建“平安校园”工作规划10.5 创建“平安校园”工作实施方案第 2 卷第 86 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷安保人员登记表10.5 第 2 卷创建“平安校园”工作目标管理责任书第 87 盒 (A3———B13学校管理) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注安全教育“四落实”10.9 第 1 卷第 88 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷创建“平安校园”工作应急预案10.5 第 2 卷创建“平安校园”安全事故风险评估报告第 89 盒 (A3———B13学校管理) 卷数文件题目备注创建“平安校园”班级安全监督员一览表10.5 第 1 卷第 2 卷创建“平安校园”致安全监督员的一封信创建“平安校园”班级安全监督员建议表第 3 卷第 90 盒 (A3———B13学校管理) 卷数文件题目备注第 1 卷安全工作上级文件11.01 安全应急预案11.3 第 2 卷处室岗位目标责任书11.2 第 3 卷第 4 卷教师岗位目标责任书11.2 自驾车安全目标责任书11.2 第 5 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire31 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 91 盒 (A3———B13学校管理) 卷数文件题目备注开学初安全排查11.1 第 1 卷安全隐患排查实施方案及学生安全作业11.3 第 2 卷第 3 卷学生上下学交通情况排查资料11.1 第 92 盒 (A3———B13学校管理) 卷数文件题目备注开学初安全演练资料11.2 第 1 卷第 2 卷安全教育日资料11.3 清明节安全教育11.4 第 3 卷春节放假前安全教育班会记录11.1 第 4 卷第 5 卷安全教育“四落实”2011.2 第 104 盒 (A3—B14德育工作) 文件题目备注卷数班主任工作上级文件2010.3 第 1 卷班主任工作周记录表2010.09 第 2 卷第 3 卷班级学生管理制度 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 4 卷班级管理制度第 5 卷班级管理计划班委会组织表第 6 卷班主任工作考核方案09.08-10.08 第 7 卷第 8 卷班主任经验交流发言稿 2010.10 班主任竞聘上岗实施方案 2010.08 第 9 卷班主任培训工作计划09.08-10.06 第 10 卷班主任岗位竞聘工作方案 09.08-10.07 第 11 卷第 12 卷班集体工作评估方案09.08-10.07 第 13 卷班主任工作考评方案2010.08 班主任培训工作计划10.08-11.07 第 14 卷第 105 盒 (A3—B14德育工作) 文件题目备注卷数德育十一五规划06.01-10.12 第 1 卷德育十一五规划第卷德育工作方案计划2010.01 第卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire33 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第卷德育工作计划2010.09 德育工作方案、制度第卷第卷政教处工作计划班主任德育工作计划第卷第卷教师绩效考核细则 2010.04 学科德育渗透 2010.2 第卷第 106 盒 (A3—B14德育工作) 文件题目备注卷数镇德育工作计划、方案2009.01 第 1 卷第 2 卷学校德育工作计划、方案2009.02 班主任德育工作计划2009.09 第 3 卷第 4 卷班级工作计划2009.02 第 107 盒 (A3—B14德育工作) 文件题目备注卷数教师工作手册2009.02 第 1 卷第 108 盒 (A3—B14德育工作) 文件题目备注卷数第 1 卷德育工作制度、德育工作网络2008.02 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 2 卷德育工作实施方案、计划2008.02-09 班主任德育工作计划2008.09 第 3 卷教师德育教育心得体会2008.11 第 4 卷第 5 卷校长负责制2008.09 第 109 盒 (A3—B14德育工作) 文件题目备注卷数校园文化五年规划2006.02-2010.12 第 1 卷学校三年发展规划2007.02-2010.12 第 2 卷学校领导班子成员会议制度2008.02 第 3 卷第 4 卷领导班子研究教育教学工作制度2008.02 第 110 盒 (A3—B14德育工作) 文件题目备注卷数德育工作特色(办学特色)2008.12 第 1 卷第 2 卷学生成长档案2008.02 第 111 盒 (A3—B14德育工作) 文件题目备注卷数王瓜店街道办事处教育系统德育工作方案、计划第 1 卷第 2 卷王瓜店街道办事处中心小学德育工作方案、计划 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire35 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 112 盒 (A3—B14德育工作) 文件题目备注卷数第 1 卷学科德育渗透计划2011.3 第 113 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷 2008年少先队工作计划第 2 卷学生工作评价制度、方案第 3 卷少先队员名单第 4 卷少先队干部培训制度第 5 卷少先队名单第 6 卷新队员入队仪式第 7 卷少先队管理组织系统表，制度第 8 卷队课课程安排表第 9 卷少先队知识测试成绩单第 10 卷队课学习记录第 11 卷学生思想品德评定方案、评价细则第 12 卷常规养成教育第 13 卷学习习惯培养第14 卷心理健康教育第 15 卷学生行为规范教育 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 16 卷行为规范文明礼貌教育心得第 17 卷常规检查记录表第 114 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷小学生行为习惯养成教育第 2 卷学生行为规范教育第 3 卷道德修养主题教育活动第 4 卷 “心手相牵”互助营留守儿童第 5 卷向鹿琳琳同学学习活动第 6 卷宣传教育活动月方案第 7 卷学生行为规范教育第 8 卷 “八荣八耻”绘画比赛通知第 9 卷未成年人思想教育道德建设方案第 10 卷 “全民读书月”基础教育改革三十年第 11 卷预防未成年犯罪工作第 12 卷理想信念教育活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire37 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 13 卷民族精神教育活动第 115 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷植树节活动第 2 卷学雷锋月活动第 3 卷敬老院献爱心活动第 4 卷清明节扫墓活动第 5 卷感恩母亲节活动第 6 卷庆六一活动第 7 卷 “迎国庆、赞祖国”书画大赛第 8 卷教师节活动第 9 卷感恩重阳节活动第 10 卷 “祖国在我心中”板报评比活动第 11 卷 “队歌校歌唱响校园”活动第12 卷开展小学生“小发明、小制作、小征文”活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 116 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷法制教育活动第 2 卷法制教育活动学生心得第 3 卷电影《举起手来》观看活动第 4 卷文明上网教育活动第 5 卷国防教育活动第 6 卷法制教育活动第 7 卷德育评价第 117 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷升国旗制度，安排表第 2 卷国旗下讲话稿第 3 卷红领巾广播站第 118 盒 (A3———B14德育工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire39 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷学生综合素质评价方案第 2 卷学生综合素质评价表第 119 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷 2009年少先队工作计划第 2 卷一日常规管理评比第 3 卷一日常规检查表第 4 卷升国旗制度第 5 卷升国旗安排表第 6 卷升旗日志第 7 卷少先队员名单第 8 卷少先队组织系统第 120 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷敬老院献爱心活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第2 卷感恩母亲节活动第 3 卷国防教育活动第 4 卷 “向国旗敬礼，做一个有道德的人”统计表第 5 卷 “向国旗敬礼，做一个有道德的人”学生寄语第 6 卷 “八荣八耻”绘画比赛活动第 7 卷亲情书信，征文活动第 8 卷庆“六、一”活动第 121 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷植树节活动第 2 卷争当小实验家活动第 3 卷陆房扫墓活动第 4 卷陆房扫墓活动心得体会第 5 卷 “防灾、减灾”活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire41 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 6 卷 “防灾、减灾”活动记录、手抄报、心得体会第 7 卷小实验家训练安全责任书第 8 卷队歌校歌唱响校园比赛活动第 9 卷理想信念教育活动第 122 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷开学第一课活动第 2 卷庆国庆演讲比赛第 3 卷观看国庆60周年庆典活动和阅兵式第 4 卷纪念祖国成立60周年书法比赛第 5 卷迎国庆主题班会第 6 卷庆国庆手抄报第 7 卷科技小发明，小制作活动第 8 卷民族精神教育活动第 123 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷行为规范教育 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 2 卷法制教育活动第 3 卷法制教育班会记录第 4 卷常规管理第 5 卷学生行为规范教育第 6 卷《小学生守则》等常规管理第 7 卷红领巾广播站第 8 卷心理健康教育第 9 卷文明上网教育第 10 卷文明上网班会记录第 124 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷学生道德品质评价表第 2 卷学生思想品德评定第 3 卷中队德育教育第 4 卷行为规范评价方案第 5 卷思想品德达标第 125 盒 (A3———B14德育工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire43 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷学生综合素质评价方案第 2 卷学生综合素质评价表第 126 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷 2010年团委工作计划要点第 2 卷 2010年学校，少先队工作计划第 3 卷少先队培训制度，例会制度等第 4 卷团队工作会议记录第 5 卷学生自主管理实施方案第 6 卷少先队队室建设标准第 7 卷少先队名单第 8 卷少先队队员名单第 9 卷少先队制度，职责第 10 卷新少先队入队活动第 127 盒 (A3———B14德育工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 1 卷日常行为规范教育，心得第 2 卷《小学生守则》《规范》实施办法第 3 卷学生一日常规第 4 卷一日常规检查评比表学习《小学生日常行为规范》《中小学生守则》活第 5 卷动心得第 6 卷一日常规检查汇总表第 7 卷一日常规卫生第 8 卷行为规范教育第 9 卷行为规范教育主题班会第 128 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷学生行为规范教育第 2 卷行为习惯教育班会第 3 卷学生行为评价表 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire45 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 4 卷班级管理制度行为习惯、卫生教育班会记录第 5 卷第 6 卷小学生一日常规第 7 卷一日常规班会记录第 8 卷《小学生守则》《规范》测试题第 129 盒 (A3———B14德育工作) 卷数文件题目备注庆元旦汇演活动第 1 卷第 2 卷植树节活动第 3 卷学雷锋活动第 4 卷缅怀革命先烈主题班会第 5 卷 “六、一”儿童节活动第 6 卷教师节活动第 7 卷庆国庆文艺汇演第 8 卷庆国庆手抄报第 130 盒 (A3———B14德育工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录泰安市小记者信息采集表第 1 卷第 2 卷泰安市小记者团章程，名单第 3 卷小记者发表文章第 4 卷小记者工作研讨会第 5 卷端午节活动第 6 卷重阳节活动第 7 卷重阳节手抄报第 131 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷组织观看《隐形的翅膀》活动第 2 卷观看《复兴之路》电影活动第 3 卷电影《复兴之路》观后感第 132 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷法制教育上级来文 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire47 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷法制副校长聘书第 3 卷法制教育安排表，讲稿第 4 卷法制教育主题班会第 5 卷法制教育活动心得体会第 6 卷心理健康教育活动第 7 卷国防教育活动第 133 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷争当“四好少年”活动第 2 卷红领巾广播站第 3 卷红领巾广播稿第 4 卷红领巾稿件统计第 5 卷敬老院献爱心活动第 6 卷扫墓主题活动第 7 卷文明上网活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 8 卷文明上网学生心得第 9 卷学生德育评价结果第 134 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷 “一人一瓶水”爱心送旱区特别行动的通知第 2 卷校园金话筒活动第 3 卷母亲节活动第 4 卷尚德电力杯创意大赛第 5 卷 “红五月”系列活动第 6 卷 “金融杯”书信活动第 7 卷 “争当小实验家”活动第 8 卷 “全民读书月”活动第 135 盒 (A3———B B14德育工作) 卷数文件题目备注第 1 卷升国旗制度、安排表 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire49 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷国旗下讲话稿第 3 卷国旗下讲话安排表第 4 卷升旗日志第 136 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷学生综合素质评价方案第 2 卷学生综合素质评价表第 137 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷德育基地聘书第 2 卷校外教育资源开发利用计划及措施第 3 卷校外教育基地第 4 卷校外教育资源的开发与利用第 5 卷队员校外实践活动第 6 卷社会实践活动建设规划，计划，掠影等 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 7 卷校外课程资源活动计划方案第 8 卷校外资源开发计划第 9 卷参观“科技馆” 第 10 卷参观科技馆心得第 138 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷 2011年少先队工作计划第 2 卷学生自主管理及中队组成第 3 卷守则，规范学习活动第 4 卷庆2011元旦文艺汇演第 5 卷泰安市优秀学生评选第 6 卷一日常规检查表第 7 卷法制教育报告活动第 8 卷文明上网教育活动第 9 卷升国旗制度，安排表，日志第 139 盒 (A3———B14德育工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire51 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷肥城市优秀学生评选第 2 卷 “大安.绿视界”杯明星小记者比赛第 3 卷学雷锋活动第 4 卷植树节活动第 5 卷沐春踏青感想第 6 卷《春雨沙沙》电影观看及观后感第 7 卷 “传承民族文化，缅怀革命烈士”系列活动第 8 卷 “传承民族文化，缅怀革命烈士”心得体会第 9 卷 “传承民族文化，缅怀革命烈士”手抄报第 140 盒 (A3———B15教学工作) 卷数文件题目备注义务教育课程实施安排第 1 卷第 2 卷 2008-2009总分课程表 2007-2008总分课程表、时间表第 3 卷教学常规管理方案第 4 卷第 5 卷常规材料检查表 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录查课查岗第 6 卷第 7 卷地方校本课程实施及评价方案校本课程开发指南第 8 卷校本教研第 9 卷第 10 卷教学工作会议记录第 141 盒 (A3———B15教学工作) 卷数文件题目备注 2009-2010教师任课表第 1 卷教科研组织实施第 2 卷第 3 卷调课审批查课查岗 2009.02 第 4 卷第 5 卷查课查岗 2009.09 2009-2010教导处工作计划第 6 卷音体美工作实施第 7 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire53 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 8 卷教学常规检查方案教学常规检查资料第 9 卷第 10 卷学校教学工作会议记录教导处常规检查工作纪实第 11 卷第 142 盒 (A3———B15教学工作) 卷数文件题目备注 2009-2010总分课程表第 1 卷第 2 卷地方学校课程实施纲要电子备课管理制度第 3 卷常规检查方案、电子备课检查表第 4 卷第 5 卷常规检查打分表调课登记表 2010.02 第 6 卷第 7 卷调课登记表 2010.09 查课查岗 2010.02 第 8 卷查课查岗 2010.09 第 9 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录校本课程开发实施评价方案第 10 卷第 143 盒 (A3———B15教学工作) 卷数文件题目备注 2010-2011学年总分课程表第 1 卷常规检查方案第 2 卷常规检查打分表第 3 卷调课登记表第 4 卷查课查岗第 5 卷第 144 盒 (A3———B15教学工作) 卷数文件题目备注贯彻省市中小学素质教育工作会议通知第 1 卷肥教发(2008)4号文肥城市人民政府大力推进素质教育的意见第 2 卷肥政发(2008)6号文肥教发(2008)32号文第 3 卷肥教发(20091)7号文第 4 卷肥教发(2010)1号文第 5 卷第 145 盒 (A3———B15教学工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire55 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷 2009年教师听课记录第 146 盒 (A3———B15教学工作) 卷数文件题目备注 2009年教师听课记录第 1 卷第 147 盒 (A3———B15教学工作) 卷数文件题目备注 2010年教师听课记录第 1 卷第 148 盒 (A3———B15教学工作) 卷数文件题目备注 2010年教师听课记录第 1 卷第 149 盒 (A3———B15教学工作) 卷数文件题目备注教学练上级文件第 1 卷第 2 卷教学练实施方案送课到校教师听课体会第 3 卷教师读书计划第 4 卷班主任工作经验介绍第 5 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录教师电脑技能比赛第 6 卷教学练师徒结对第 7 卷第 8 卷教师课堂教学水平自查第 150 盒 (A3———B15教学工作) 卷数文件题目备注第 1 卷学困生结对、帮扶记录学生钢笔字比赛第 2 卷第 3 卷学生学习习惯经验介绍第 151 盒 (A3———B15教学工作) 卷数文件题目备注教师基本功训练——钢笔字、简笔画第 1 卷教师基本功训练——毛笔字第 2 卷第 152 盒 (A3———B15教学工作) 卷数文件题目备注第 1 卷王瓜店教育办公室关于规范办学文件 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire57 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷中心小学规范办学行为实施方案中心小学减负十条规定第 3 卷第 4 卷规范教师办学行为责任书教师考核细则第 5 卷教师施教行为调查问卷第 6 卷第 7 卷减负责任书 2009.02 减负责任书 2009.09 第 8 卷第 9 卷作业审批表 2009.02 作业审批表 2009.09 第 10 卷第 153盒 (A3———B15教学工作) 卷数文件题目备注加强教学管理规范办学行为实施方案第 1 卷第 2 卷规范教师教育教学行为责任书减负责任书第 3 卷学生实践性作业布置表第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 154 盒 (A3———B15教学工作) 卷数文件题目备注各科课堂教学模式第 1 卷语文数学教学大比武材料第 2 卷语文同课异构活动资料第 3 卷数学同课异构活动资料第 4 卷第 155 盒 (A3———B15教学工作) 卷数文件题目备注第 1 卷王瓜店中心小学贯彻落实省40条方案王瓜店教育办公室关于教学质量监控文件第 2 卷中心小学学生学生考试规定及等级评价办法第 3 卷第 4 卷学生学情评价记录 2010 学生学情评价记录 2011 第 5 卷第 156 盒 (A3———B15教学工作) 卷数文件题目备注第 1 卷山东省中小学教材和教辅资料管理规定第 2 卷中心小学教材和教辅资料管理办法第 3 卷 2008年小学免费教科书发放汇总单及花名册 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire59 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 2009年小学免费教科书发放汇总单及花名册第 4 卷 2010年小学免费教科书发放汇总单及花名册第 5 卷 2011年小学免费教科书发放汇总单及花名册第 6 卷第 157 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷认真执行中小学视力检测制度的通知上级文件第 2 卷视力检测表第 3 卷视力分析报告第 4 卷第 5 卷儿童视力普查情况第 6 卷视力调查表视力检测表第 7 卷视力状况调查第 8 卷学生视力健康档案第 9 卷第 10 卷学生查体表第 11 卷体检、视力统计及分析 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录数据上报工作计划第 12 卷第 158 盒 (A3———B16体育卫生工作) 卷数文件题目备注关于手足口病的文件、方案第 1 卷第 2 卷手足口病等传染病防治通知第 3 卷致家长的一封信第 159 盒 (A3———B16体育卫生工作) 卷数文件题目备注学生生活、卫生保健制度第 1 卷上级文件第 2 卷第 3 卷世界卫生日材料第 160 盒 (A3———B16体育卫生工作) 卷数文件题目备注上级文件第 1 卷卫生室工作计划及总结第 2 卷健康体检通知第 3 卷卫生制度第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire61 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 5 卷班级卫生管理制度第 6 卷卫生管理自查表第 7 卷特殊病历记录第 8 卷地方性氟中毒第 161 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷艾滋病活动方案艾滋病状况分析第 2 卷世界艾滋病日活动材料第 3 卷艾滋病教育测试题第 4 卷第 5 卷艾滋病教育手抄报第 162 盒 (A3———B16体育卫生工作) 卷数文件题目备注上级卫生文件第 1 卷第 2 卷甲流防治上级工作文件手足口病预防上级文件第 3 卷第 4 卷手足口病等传染病防治通知卫生室工作计划及总结第 5 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卫生室药品使用登记第 6 卷第 7 卷卫生室组织系统、制度、预案突发性传染病防控应急预案第 8 卷第 9 卷地方性氟中毒第 163 盒 (A3———B16体育卫生工作) 卷数文件题目备注上级卫生工作文件第 1 卷新生入校接种制度、计划第 2 卷第 3 卷学校卫生管理条例外来人员登记表第 4 卷学校卫生管理制度第 5 卷学生查体表第 6 卷第 7 卷传染病及应急事故预案第 8 卷手足口病防治制度、预案手足口病防治工作会议记录第 9 卷第 164 盒 (A3———B16体育卫生工作) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire63 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷预防甲流宣传教育材料第 2 卷办公室教室开窗通风检查表甲流防控知识手抄报第 3 卷卫生健康教育手抄报第 4 卷甲流防控工作方案、制度、组织第 5 卷第 6 卷甲流防控应急预案第 7 卷甲流传染病症状登记表教职工晨午检登记表第 8 卷甲流防控用药登记第 9 卷传染病防控因病缺勤病因追索表第 10 卷第 11 卷甲流防控班会记录第 12 卷传染病防治消毒记录第 165 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷麻疹防控明白纸第 2 卷麻疹防治班会记录 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录麻疹疫苗统计表第 3 卷预防接种情况登记表第 4 卷第 5 卷传染病防治晨午检登记表第 166 盒 (A3———B16体育卫生工作) 卷数文件题目备注卫生专职人员档案第 1 卷第 2 卷体育专职教师档案各种卫生保健制度第 3 卷第 4 卷地方性氟中毒材料学生饮水卫生情况报告及宣传材料第 5 卷卫生保健教师培训证书第 6 卷第 167 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷健康教育计划及管理制度中心小学手足口病防治工作领导小组第 2 卷第 3 卷中心小学手足口病防治工作实施方案第 4 卷预防手足口病应急预案 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire65 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 5 卷学生健康状况监测情况第 168 盒 (A3———B16体育卫生工作) 卷数文件题目备注泰体卫艺印发的通知以及学校预防艾滋病的手抄报第 1 卷学生防控艾滋病的手抄报第 2 卷第 169 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷关于结核病防控的各级文件第 2 卷防控结核病的宣传材料防控结核病的学生手抄报第 3 卷第 170 盒 (A3———B16体育卫生工作) 卷数文件题目备注健康教育计划、备课第 1 卷第 171 盒 (A3———B16体育卫生工作) 卷数文件题目备注第 1 卷健康教育计划、备课第 172 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷体育艺术2+1活动记录第 173 盒 (A3—B16体育卫生工作) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注艺体教学资料第 1 卷艺体教师考核资料第 2 卷第 3卷上级来文第 4卷上级文件第 5卷上级文件上级文件第 6卷上级文件第 7卷阳光体育第 8卷第 174 盒 (A3—B16体育卫生工作) 卷数文件题目备注阳光体育活动计划第 1 卷 “每天一小时”活动制度方案、计划第 2 卷阳光体育活动安排表第 3 卷阳光体育活动2+1掠影第 4 卷第5 卷阳光体育活动打分表第 6 卷 2008-2009冬季长跑第 175 盒 (A3—B16体育卫生工作) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire67 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注春季运动会第 1 卷第 2 卷跳绳比赛拔河比赛第 3卷篮球对抗赛第 4卷第 176 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷体育艺术2+1活动记录第 177 盒 (A3—B16体育卫生工作) 卷数文件题目备注体育艺术2+1项目第 1 卷阳光体育活动安排表第 2 卷第 3 卷阳光体育活动阳光体育活动检查评比表及总结第 4 卷第 178 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷上级文件文体活动方案第 2 卷体育艺术2+1 第 3 卷每天体育锻炼一小时” 阳光体育活动第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 5 卷体育艺术2+1项目阳光体育活动计划第 6 卷第 7 卷阳光体育、体育艺术2+1检查记录阳光体育——大课间活动第 8 卷第 9 卷王瓜店教育办公室下发文件阳光体育长跑活动第10 卷第 179 盒 (A3—B16体育卫生工作) 卷数文件题目备注春季运动会第 1 卷广播体操大赛第 2 卷拔河比赛第 3卷迎国庆跳绳比赛第 4 卷第 5 卷秋季运动会冬季长跑比赛第 6 卷第 7 卷拔河比赛第 180 盒 (A3—B16体育卫生工作) 卷数文件题目备注体育艺术2+1活动记录第 1 卷第 181 盒 (A3—B16体育卫生工作) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire69 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注体育艺术2+1活动档案表第 1 卷第 182 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷体育艺术2+1活动记录第 183 盒 (A3—B16体育卫生工作) 卷数文件题目备注体育艺术2+1活动记录第 1 卷第 184 盒 (A3—B16体育卫生工作) 卷数文件题目备注体育艺术2+1活动记录第 1 卷第 185 盒 (A3—B16体育卫生工作) 卷数文件题目备注学生体质健康检测及数据上报第 1 卷第 2 卷学生体质数据分析报告第 186 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷申报学校重点体育项目的通知 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录学校重点体育项目申报表第 2 卷第 3 卷重点体育项目规划机构制度计划艺术体育活动实施方案第 4 卷艺体组活动计划第 5 卷第 6 卷艺体组活动评估方案第 187 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷阳光体育活动计划及方案、总结阳光体育活动方案及活动安排第 2 卷阳光体育活动班级活动计划第 3 卷第 4 卷阳光体育活动检查记录阳光体育活动长跑活动第 5 卷长跑活动检查记录及跟踪记录第 6 卷第 188 盒 (A3—B16体育卫生工作) 卷数文件题目备注春季运动会第 1卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire71 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 拔河比赛第 2卷跳绳比赛第 3卷秋季运动会第 4卷第 189 盒 (A3—B16体育卫生工作) 卷数文件题目备注 2008年上学期体育备课第 1 卷第 190 盒 (A3—B16体育卫生工作) 卷数文件题目备注 2008年下学期体育备课第 1 卷第 191 盒 (A3—B16体育卫生工作) 卷数文件题目备注 2009年上学期体育备课第 1 卷第 192 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷 2009年下学期体育备课第 193 盒 (A3—B16体育卫生工作) 卷数文件题目备注第 1 卷 2010年上学期体育备课第 194 盒 (A3—B16体育卫生工作) 卷数文件题目备注 2010年下学期体育备课第 1 卷第 195 盒 (A3———B16心理健康教育) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注第 1卷心理健康计划心理健康师资培训证书第 2 卷第 3 卷心理健康标准健康备课第 4 卷健康教育教案第 5卷第 6 卷心理健康讲座健康教育专家讲座第 7 卷第 8 卷心理咨询记录班级活动记录第 9 卷心理健康调查报告第 10 卷第 11 卷班级健康教育总结心理健康工作总结第12 卷第 196 盒 (A3———B16心理健康教育) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire73 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注第 13卷心理健康工作制度心理健康工作计划第 14 卷第 15 卷健康教育工作计划第 416卷心理咨询工作计划领导机构组成、计划、制度第 17卷第 18卷心理健康师资培训证书第 19 卷小学生心理健康标准心理健康调查报告第 20 卷第 21卷小学生心理情况分析第 22 卷心理健康讲座心理咨询记录第 23 卷第24 卷学生心得体会第 25 卷健康教育工作总结教师教学工作计划第 26 卷第 27 卷教师教学计划及教案第28 卷健康教育备课第 197 盒 (A3———B16心理健康教育) 卷数文件题目备注第 29卷心理健康工作制度健康教育计划 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 30 卷心理健康工作计划心理咨询工作计划小学生心理健康标准第 3 1卷心理健康讲座第 32 卷第33卷心理咨询记录心理咨询记录第 34 卷健康教育宣传材料第 35 卷第 36 卷心理健康调查报告心理健康板报掠影第 37卷心理健康教育心得体会第 38 卷第 39 卷小学生情绪变化指导讲座学生来信及教师回复第40 卷心理健康教育总结第 41 卷第 42 卷心理健康师资培训证书心理健康状况测试卷第 43 卷心理健康手抄报第44 卷第 45 卷健康教育备课第 199 盒 (A4———B17教师管理) 卷数文件题目备注第 1 卷面向社会认定教师资格的通知 2008-2011 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire75 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷教师任职资格证书复印件教职工工资单复印件 2011 第 3 卷第 4 卷教师任课表 2008-2011 肥城市人民政府关于进一步加强教师队伍管理的意见第 5 卷肥城市招聘乡镇教师试用通知第 6 卷第 7 卷补充教师信息表 2008年职称评聘文件第 8 卷第 9 卷 2009年职称评聘文件 2010年职称评聘文件第 10 卷第200盒 (A4———B17教师管理) 卷数文件题目备注关于选拔推荐 2008 第 1 卷第二批泰安市教育系统人才递进培养工程的通知关于选拔推荐第 2 卷 2010 第三批泰安市教育系统人才递进培养工程的通知肥城市教育局第 3 卷关于2009——2012年教师队伍建设实施的意见肥城市关于做好“桃乡英才”选拔推荐工作的通知第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录关于做好山东省特级教师选拔推荐工作的通知第 5 卷第 6 卷肥城市人民政府关于加强教师编制的若干文件王瓜店镇干部教师定期交流工作第 7 卷中心小学教师交流工作计划第 8 卷第 9 卷中心小学教师交流统计表第201盒 (A4———B17教师管理) 卷数文件题目备注第 1 卷肥城市教育局关于做好2007-2008 学年考核工作的通知 2007-2008年教师考核方案、教师考核情况统计第 2 卷 2007-2008教室考勤统计第 3 卷第 4 卷教师教学成绩教师民主评议教师业务能力统计第 5 卷第 6 卷教师附加分统计教师考核结果公示第 7 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire77 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第202盒 (A4———B17教师管理) 卷数文件题目备注肥城市教育局关于做好2009 年度考核工作的通知第 1 卷 2008-2009学年教师考核细则第 2 卷第 3 卷教师各项成绩统计 2008年教师考核民主评议打分表第 4 卷第 5 卷教师教学成绩统计教师考勤统计第 6 卷教师考核结果公示第 7 卷第203盒 (A4———B17教师管理) 卷数文件题目备注山东省普通中小学教师工作评价指导意见第 1 卷 2009-2010教师考核细则肥城市教育局关于做好教职工考核工作和评优树先工作的第 2 卷通知第 3 卷肥城市教育局关于做好2009 年度考核工作的通知教师考情统计第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录教师考核民主评议打分表第 5 卷第 6 卷教师各项荣誉统计教师考核结果公示第 7 卷第204盒 (A4———B17教师管理) 卷数文件题目备注 2010-2011学年教师考核细则第 1 卷第205盒 (A4———B18教师培训) 卷数文件题目备注肥城市教师继续教育和校长培训工作实施意见第 1 卷肥教发[2002]26号文肥城市中小学教师继续教育和校长培训工作评估奖惩意见第 2 卷肥城市中小学教师继续教育中长期规划第 3 卷 (2011-2020) 第 4 卷中心小学校长岗位培训证书肥城市教师进修学校教师培训文件第 5 卷第206盒 (A4———B18教师培训) 卷数文件题目备注第 1 卷教师继续教育证书原件 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire79 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第207盒 (A4———B18教师培训) 卷数文件题目备注 2008年上级教师培训文件第 1 卷第 2 卷 2008年教师培训统计表、证书、发票第 3 卷王瓜店教育办公室教师培训制度、计划、方案中心小学教师校本培训计划、方案、总结第 4 卷第 5 卷中心小学教师继续教育制度、计划、机构第208盒 (A4———B18教师培训) 卷数文件题目备注第 1 卷 2009年上级教师培训文件 2009年教师培训统计表、证书、发票第 2 卷第 3 卷王瓜店教育办公室教师培训制度、计划、方案中心小学教师继续教育制度、计划、机构第 4 卷中心小学教师校本培训计划、方案、第 5 卷第 6 卷教师继续教育责任书第209盒 (A4———B18教师培训) 卷数文件题目备注 2010年上级教师培训文件第 1 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录肥城市教育局关于街镇中小学返岗教师培训方案第 2 卷第 3 卷体育教师、卫生专业人员培训通知王瓜店教育办公室教师培训计划、方案第 4 卷中心小学教师继续教育第 5 卷制度、计划、机构、名单、证书、发票第 6 卷中心小学教师信息技术校本培训方案、培训材料教师继续教育责任书第 7 卷第 8 卷教师信息技术校本培训记录第210盒 (A4———B18教师培训) 卷数文件题目备注第 1 卷 2011年上级教师培训文件肥城市教育局关于开展中小学教师信息技术应用能力校本第 2 卷培训方案的通知第 3 卷王瓜店教育办公室教师培训计划、方案中心小学教师信息技术校本培训方案、培训材料第 4 卷 2011年教师培训计划、机构、报名统计、发票第 5 卷第211盒 (A4———B18教师培训) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire81 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 卷数文件题目备注校本教科研规划第 1 卷第 2 卷语文学科校本教研记录 2008 语文学科校本教研记录 2009 第 3 卷第 4 卷语文学科校本教研记录 2010 数学学科校本教研记录 2008 第 5 卷数学学科校本教研记录 2009 第 6 卷第 7 卷数学学科校本教研记录 2010 第212盒 (A4———B18教师培训) 卷数文件题目备注英语学科校本教研记录 2008 第 1 卷英语学科校本教研记录 2009 第 2 卷第 3 卷英语学科校本教研记录 2010 第 4 卷常识学科校本教研记录 2008 常识学科校本教研记录第 5 卷 2009 常识学科校本教研记录第 6 卷 2010 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录艺体学科校本教研记录 2008 第 7 卷艺体学科校本教研记录 2009 第 8 卷艺体学科校本教研记录 2010 第 9 卷第 213A 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷作风效能建设年活动实施方案2010.03 作风效能建设年教师自查报告第 2 卷教师师德培训资料2010.02 第 3 卷师德自查工作总结2010.03 第 4 卷规范教师行为告家长书 2010.01 第 5 卷第 6 卷深化两个面对，落实四好要求教师体会 2010.11 “争创敬业先锋，争当师德表率”通知 2010.12 第 7 卷第 8 卷 “争创敬业先锋，争当师德表率”实施方案 “争创敬业先锋，争当师德表率”学习心得第 9 卷第 213B 盒 (A4—B19教师素质) 文件题目备注卷数 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire83 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷师德建设工作计划、方案、制度2010.03 师德建设评估方案2010.08 第 2 卷第 3 卷师德考核评分标准2010.09 学习张书记讲话心得体会第 4 卷第 5 卷学习《中小学教师职业道德规范》体会学习“深化两个面对，落实四好要求”体会第 6 卷第 7 卷师德教育学习材料2010.03 师德自查报告 2010.09 第 8 卷第 9 卷师德建设活动月实施方案第 214 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷教师职业道德评价2010.06 第 2 卷教师师德家长、学生评议表第 215A 盒 (A4—B19教师素质) 文件题目备注卷数师德承诺书2010.03 第 1 卷第 2 卷禁止体罚和变相体罚责任书2010.09 禁止有偿家教责任书第 3 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录师德承诺书第 4 卷第 5 卷师德理论测试卷 2010.06 师德师风建设方案 2010.03 第 6 卷第 7 卷师德师风建设活动资料第 215B 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷政治学习笔记2010.07 第 216A 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷师德考核方案2009.02 第 2 卷教师施教行为，学生调查问卷2009.05 第 3 卷师德承诺书2009.02 第 4 卷禁止体罚和变相体罚责任书2009.02 第 5 卷禁止体罚和变相体罚专题会资料2009.04 控辍保学责任书2009.02 第 6 卷第 216B 盒 (A4—B19教师素质) 文件题目备注卷数 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire85 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷师德建设计划、方案2009.02 师德建设工作计划2009.09 第 2 卷第 3 卷师德建设方案、考核方案师德建设考评方案第 4 卷第 5 卷师德培训资料师德规范资料第 6 卷第 216C 盒 (A4—B19教师素质) 文件题目备注卷数学校机构设置分工及职责2009.09 第 1 卷第 2 卷处室岗位目标责任书教师岗位目标责任书第 3 卷第 217 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷干部教师评议表及师德考核结果2009.11 教师职业道德家长评议表第 2 卷教师职业道德学生评议表第 3 卷第 218A 盒 (A4—B19教师素质) 文件题目备注卷数 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录师德建设工作计划、方案08.2 第 1 卷第 2 卷师德工作计划、考核方案、评价表师德培训资料第 3 卷第 4 卷师德规范材料第 218B 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷师德建设上级文件2008.02 关于进一步落实“两个面对”加强师德师能建设活动的第 2 卷通知2008.04 第 3 卷继续解放思想推进科学发展观学教活动第一阶段资料继续解放思想推进科学发展观学教活动资料第 4 卷继续解放思想推进科学发展观学教活动第一阶段学习第 5 卷心得继续解放思想推进科学发展观学教活动第二阶段资料第 6 卷继续解放思想推进科学发展观学教活动第二阶段学习第 7 卷心得第 8 卷继续解放思想推进科学发展观学教活动第三阶段资料继续解放思想推进科学发展观学教活动上级文件第 9 卷第 218C 盒 (A4—B19教师素质) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire87 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 文件题目备注卷数镇“两个面对”方案08.1 第 1 卷 “两个面对”方案第 2 卷 “两个面对”心得体会第 3 卷 “两个面对”学生体会第 4 卷第 219A 盒 (A4—B19教师素质) 文件题目备注卷数继续解放思想推进科学发展观学教活动第二阶段征求第 1 卷学生家长意见信2008.04 第 219B 盒 (A4—B19教师素质) 文件题目备注卷数领导干部评议教师2008.12 第 1 卷第 2 卷教师评议领导干部2008.11 教师职业道德学生评价表2008.06 第 3 卷第 4 卷教师互评表2008.12 第 220A 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷师德承诺书08.9 禁止体罚和变相体罚责任书第 2 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录控辍保学责任书第 3 卷第 220B 盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷读书笔记 2008.07 第221盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷 “作风效能提升年”活动材料2011.3 “干部教师作风集中整顿”第二阶段活动资料2011.4 第 2 卷王瓜店教育系统“作风效能提升年”相关活动方案第 3 卷 2011.3 师德师风建设年活动总结2011.1 第 4 卷第 5 卷师德师风上级文件2011.3 第222盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷教师施教行为责任书2011.2 关于排查教师兼职情况假装教师队伍管理的资料第 2 卷 2011.4 第 3 卷师德承诺书2011.2 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire89 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第223盒 (A4—B19教师素质) 文件题目备注卷数第 1 卷教师个人“树标杆”材料2011.4 教师自查问题整改方案2011.4 第 2 卷第 3 卷教师检查问题分析报告2011.4 “争做敬业先锋、争当师德表率”学校汇报材料及典型第 4 卷个人材料2011.1 第 224 盒 (A4———B19教师素质) 卷数文件题目备注教师业务学习计划、安排 2009 第 1 卷第 2 卷教师业务学习记录 2009 第 225 盒 (A4———B19教师素质) 卷数文件题目备注第 1 卷教师业务学习计划、安排 2009 教师业务学习记录 2009 第 2 卷第 226 盒 (A4———B19教师素质) 卷数文件题目备注第 1 卷教师业务学习计划、安排 2010 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 2 卷教师业务学习记录 2010 第 227 盒 (A4———B19教师素质) 卷数文件题目备注教师业务学习计划、安排 2010 第 1 卷第 2 卷教师业务学习记录 2010 第 228 盒 (A4———B19教师素质) 卷数文件题目备注教师业务学习计划、安排 2008 第 1 卷第 229 A 盒 (A4———B19教师素质) 卷数文件题目备注中心小学教学能手证书第 1 卷第 2 卷教师优质课获奖证书 2009 教师优质课获奖证书 2010 第 3 卷中心小学校级优质课评选结果 2010 第 4 卷第 5 卷教师指导奖证书 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire91 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 6 卷教师获奖论文 2008-2009 教师获奖论文 2010 第 7 卷第 8 卷教师刊物发表文章教学质量先进个人证书第 9 卷第 229 B 盒 (A4———B19教师素质) 卷数文件题目备注语文教研活动第 1 卷第 2 卷数学教研活动英语教研活动第 3 卷常识教研活动第 4 卷第 5 卷艺体教研活动第 230盒 (A4———B19教师素质) 卷数文件题目备注中心小学教师配备情况第 1 卷第 2 卷骨干教师培训计划、档案 2008 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录骨干教师培养计划、档案 2009 第 3 卷第 4 卷教师个人发展规划教师个人发展计划第 5 卷领导干部转业引领第 6 卷第 7 卷教师新课改理念培训记录第 231 盒 (A4———B19教师素质) 卷数文件题目备注名师工作室学习材料第 1 卷名师工作室工作成果第 2 卷名师工作室简介第 3 卷名师工作室机构第 4 卷第 5 卷名师工作室章程第 236 盒 (A5—B22实验教学设备) 卷数文件题目备注 2008年度科学实验计划第1卷 2008年度实验教学工作总结第2卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire93 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第3卷 2008年度教学仪器领用借还登记 2008年度分组实验演示实验通知单第4卷第5卷 2008年度实验教学领导工作小组 2008年度实验教学会议记录第6卷 2008年度仪器保养记录第7卷第 237 盒 (A5—B22实验教学设备) 卷数文件题目备注第1卷 2009年度科学实验计划 2009年度实验教学工作总结第2卷 2009年度教学仪器领用借还登记第3卷第4卷 2009年度分组实验演示实验通知单 2009年度实验教学领导工作小组第5卷第6卷 2009年度实验教学会议记录 2009年度仪器保养记录第7卷第 238 盒 (A5—B22实验教学设备) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注第1卷 2010年度科学实验计划 2010年度实验教学工作总结第2卷第3卷 2010年度教学仪器领用借还登记 2010年度分组实验演示实验通知单第4卷 2010年度实验教学领导工作小组第5卷第6卷 2010年度实验教学会议记录 2010年度仪器保养记录第7卷第 239 盒 (A5—B22实验教学设备) 卷数文件题目备注 2011年度科学实验计划第1卷 2011年度教学仪器领用借还登记第2卷 2011年度分组实验演示实验通知单第3卷 2011年度实验教学领导工作小组第4卷 2011年度实验教学会议记录第5卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire95 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 2011年度仪器保养记录第6卷第 240 盒 (A5—B22实验教学设备) 卷数文件题目备注第1卷仪器室各项制度第2卷实验室各项制度第 241 盒 (A5—B22实验教学设备) 卷数文件题目备注教学仪器登记表第1卷第3卷新进教学仪器登记表第3卷教学仪器总账教学仪器明细账第4卷第 242 盒 (A5—B22实验教学设备) 卷数文件题目备注仪器损坏赔偿登记本第1卷仪器损失报告单第2卷第 243 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷 “班班通”使用记录 “班班通”使用登记第 2 卷第 244 盒 (A5——B24教育信息化装备) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注第 1 卷多媒体教室使用记录多媒体教室使用情况记录簿第 2 卷第 3 卷多媒体教室使用情况记录簿多媒体教室使用情况记录簿第 4 卷多媒体工作计划第 5 卷第 245 盒 (A5——B24教育信息化装备) 卷数文件题目备注第1卷微机室上机记录第 246 盒 (A5——B24教育信息化装备) 卷数文件题目备注微机室学生上机记录第1卷微机室教师使用记录第2卷第 247 盒 (A5——B24教育信息化装备) 卷数文件题目备注第1卷微机室学生上机记录 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire97 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2卷微机室教师使用记录微机室电脑维修记录第 3卷第 248 盒 (A5——B24教育信息化装备) 卷数文件题目备注微机室学生上机记录第 1卷第 2卷微机室教师使用记录微机室电脑维修记录第3卷第4卷微机室工作计划第 249 盒 (A5——B24教育信息化装备) 卷数文件题目备注微机室学生上机记录第 1 卷微机室教师使用记录第 2卷第 3卷微机室电脑维修记录第 250 盒 (A5——B24教育信息化装备) 卷数文件题目备注微机室学生上机记录第 1 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录微机室教师使用记录第 2卷第 3卷微机室电脑维修记录第 251 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷播放室使用记录播放室使用记录第 2 卷第 3 卷播放室使用安排表播放室使用安排表第 4 卷远程教育资源应用与教学情况登记表第 5 卷第 6 卷播放室使用登记簿播放室工作计划第 7 卷第 252 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷农远校本培训计划、实施方案、制度第 2 卷农远培训证书、材料 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire99 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 远程教育校本培训实施方案、通知、培训图片第 3 卷远程教育校本培训制度、方案第 4 卷农远工程培训照片、材料第 5 卷第 253 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷远程教育简案第 254 盒 (A5——B24教育信息化装备) 卷数文件题目备注远程教育教学计划、总结第 1 卷第 2 卷电视节目、教学资源接收登记表音像资料登记表第 3 卷教学资源接收表第 4 卷第 5 卷资源管理—远程教育教学计划远程教育资源已刻录光盘第 6 卷第 7 卷资源管理—教学应用计划、制度教学资源上课统计表第 8 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录远程教育工作总结报告第 9 卷第 10 卷远程教育教学资源目录第 255 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷远程教育工程程序方式远程教育工程实施方案第 2 卷第 3 卷远程教育各项管理制度远程教育领导机构、职责、责任书第 4 卷远程教育教研机构及职责第 5 卷第 6 卷远程教育教研工作计划远程教育规章制度汇总第 7 卷第 256 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷远程教育资源已刻录光盘现代远程教育资源使用情况记录表第 2 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire101 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 3 卷现代远程教育资源使用情况记录表 (多媒体)器材借还登记簿第 4 卷第 5 卷现代远程教育资源使用情况登记表影像资料使用记录第 6 卷资源使用情况登记表第 7 卷第 8 卷音像资料登记第 257 盒 (A5——B24教育信息化装备) 卷数文件题目备注远程教育教研应用--教育科研工作计划第 1 卷远程教育教研应用--教育科研工作计划第 2 卷第 3 卷远程教育教研应用--教育科研工作计划第 258 盒 (A5——B24教育信息化装备) 卷数文件题目备注远程教育课简案第 1 卷第 2 卷远程教育课简案 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录远程教育课简案第 3 卷第 259 盒 (A5——B24教育信息化装备) 卷数文件题目备注远程教育资源应用与教学登记表第 1 卷第 2 卷远程教育资源应用与教学登记表远程教育资源应用与教学登记表第 3 卷第 4 卷远程教育资源应用与教学登记表远程教育资源应用与教学登记表第 5 卷远程教育资源应用与教学登记表第 6 卷第 7 卷远程教育资源应用与教学登记表第 260 盒 (A5——B24教育信息化装备) 卷数文件题目备注远程教育工程资源应用与教学情况登记表第 1 卷第 2 卷远程教育工程资源应用与教学情况登记表第 261 盒 (A5——B24教育信息化装备) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire103 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷远程教育上级来文—省级远程教育上级来文—肥市级第 2 卷第 3 卷远程教育上级来文—泰安市级远程教育上级来文—镇级第 4 卷第 262 盒 (A5——B24教育信息化装备) 卷数文件题目备注现代远程教育工程实施方案第 1 卷第 2 卷远程教育验收申请表远程教育验收报告第 3 卷远程教育评分表第 4 卷远程教育实施情况汇报第 5 卷第 6 卷远程教育申请验收报告远程教育竣工报告第 7 卷远程教育设备使用及管理情况报告第 8 卷第 9 卷信息技术第 263 盒 (A5——B24教育信息化装备) should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录卷数文件题目备注教师成长记录袋第 1 卷第 2 卷现代远程教育资源考核办法第 3 卷教师信息统计表第 264 盒 (A5——B24教育信息化装备) 卷数文件题目备注第 1 卷设备管理—设备、征订、资金投入远程设备财产登记表第 2 卷第 3 卷现代远程教育工程各项管理制度现代远程教育工程设备维护情况登记册第 4 卷第 283 盒 (A6———B29社区教育) 卷数文件题目备注第1 卷绿色环保活动计划 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire105 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 2 卷校外实践，服务社区第 3 卷实践活动记录，掠影第 284 盒 (A6———B29社区教育) 卷数文件题目备注第 1 卷家庭教育资源开发利用计划、落实措施第 2 卷校外课程资源开发计划方案第 3 卷服务社区教育工作第 4 卷环保小组活动计划第 5 卷环保小组名单第 6 卷环保小组活动掠影第 7 卷环保小组社会实践记录第 8 卷环保小组系列活动第 285 盒 (A6———B29社区教育) 卷数文件题目备注第 1 卷家庭教育资源开发利用计划落实措施第 2 卷社区教育活动 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录第 3 卷社区服务教育、家长学校第 4 卷社区教育方案，机构等第 5 卷环保活动掠影第 6 卷环保小分队第 7 卷走进社区图片第 8 卷绿色小组活动计划第 9 卷环保小组名单第10 卷环保小组社会实践纪录第 11 卷 “九?九”老人节第 286 盒 (A3———B14德育工作) 卷数文件题目备注第 1 卷社区教育活动实施方案，制度等第 2 卷走进社区，体察民情心得第 287 盒附加项 (教育工作创新) 卷数文件题目备注上级文件第 1 卷第 288 盒附加项 (教育工作创新) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire107 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷家访方案家访活动方案第 2 卷第 289 盒附加项 (教育工作创新) 卷数文件题目备注荣誉证书第 1 卷第 290 盒附加项 (教育工作创新) 卷数文件题目备注第 1 卷家访计划家访计划书第 2 卷第3 卷家访计划书第 291 盒附加项 (教育工作创新) 卷数文件题目备注心灵感悟第 1 卷家访启迪录第 2 卷第 3 卷家访启迪录第 292 盒附加项 (教育工作创新) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录师生沟通的桥梁第 1 卷第 293 盒附加项 (教育工作创新) 卷数文件题目备注师生沟通的桥梁第 1 卷第 294 盒附加项 (教育工作创新) 卷数文件题目备注第 1 卷师生沟通的桥梁第 295 盒附加项 (教育工作创新) 卷数文件题目备注师生连心桥第 1 卷第 296 盒附加项 (教育工作创新) 卷数文件题目备注师生连心桥第 1 卷第 297 盒附加项 (教育工作创新) 卷数文件题目备注第 1 卷家访实施方案第 298 盒附加项 (教育工作创新) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire109 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷家访计划书第 299 盒附加项 (教育工作创新) 卷数文件题目备注家访感悟第 1 卷第300 盒附加项 (教育工作创新) 卷数文件题目备注心灵沟通的桥梁第 1 卷第 301 盒附加项 (教育工作创新) 卷数文件题目备注第 1 卷心灵沟通的桥梁第 302 盒附加项 (教育工作创新) 卷数文件题目备注心灵沟通的桥梁第 1 卷第 303 盒附加项 (教育工作创新) 卷数文件题目备注心灵沟通的桥梁第 1 卷第 304 盒附加项 (教育工作创新) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录心灵沟通的桥梁第 1 卷第 305 盒附加项 (教育工作创新) 卷数文件题目备注心灵沟通的桥梁第 1 卷第 306 盒附加项 (教育工作创新) 卷数文件题目备注第 1 卷上级文件第 307盒 (教育教学工作创新) 卷数文件题目备注地方课程、校本课程评价方案第 1 卷第 2 卷环境教育、传统文化、安全教育评价方案地方课程课堂教学评价表第 3 卷地方课程学生评价表第 4 卷第 5 卷地方课程学生随堂评价第 308盒 (教育教学工作创新) 卷数文件题目备注 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire111 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 第 1 卷课堂对对碰活动纪实科学头脑风暴智慧集锦第 2 卷第 3 卷教师读书活动第 309盒 (教育教学工作创新) 卷数文件题目备注第 1 卷综合实践活动成果汇报综合实践评价方案第 2 卷综合实践学生评价表第 3 卷第 310盒 (教育教学工作创新) 卷数文件题目备注第 1 卷《无声的世界感恩的心》开题课资料《无声的世界感恩的心》行动指导课课资料第 2 卷《无声的世界感恩的心》汇报交流资料第 3 卷第 4 卷《无声的世界感恩的心》体味反思课资料第 311盒 (教育教学工作创新) 卷数文件题目备注《笛之韵》开题课资料第 1 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and 王瓜店中心小学创建山东省教育工作示范市档案目录《笛之韵》行动指导课课资料第 2 卷第 3 卷《笛之韵》汇报交流资料《笛之韵》体味反思课资料第 4 卷 should be tightened, no loose, Terminal Board wiring should be one on each side, no more than two. J, shielded wire, spare wire113 binding order, reliable grounding. 7.7 quality standard 7.7.l cables through the cable embedded tube making use of galvanized steel pipe, tube ends without burrs, smooth. 7.7.2 pipe does not allow bending, bending the bend radius should be ? 4 times times the outer diameter of the tube in. 7.7.3 ellipticity of a bent tube, pipe diameter ? 60mm, not >8%, diameter >760mm, not >6%. 7.7.4 making cables buried piping application root production, growing where interface is required, only straight pipe, only the wire port connections, welded connections are not allowed. 7.7.5 service sleeve should have a good grounding. 7.7.6 cable trays installation, burrs and dirt and corrosion treatment should be carried out, install the bridge ... 7.8.1.7 piping and piping, equipment and equipment or piping and other equipment shall have sufficient expansion gap in hot situations. 7.8.1.8 metal temperature of the insulating layer (hot) = shell-wall temperature of environment temperature ? 40 ? c. 7.8.2 paint 7.8.2.l paint of equipment and pipelines should have at least a primer (red paint) and finish. 7.8.2.2 paint appearance color uniform, without paint, rust, flaking, wrinkles, flow marks, scum, paint particles and visible brush marks. 7.8.2.3 interlayer should be tight and without stratification. 7.8.2.4 pipelines asphalt, fiber glass fabric corrosion, external appearance should never show surrounded by glass fiber cloth uniform, dense, painted pitch inspection should be no delamination, cavitation, homogeneity of asphalt coating, brushing each layer thickness in accordance with design requirements. Standard 7.9 7.9 structure placement process. 1 fair-faced concrete is a concrete surface without any decoration, structure appearance quality of concrete structure that is able to display strength and aesthetic perception of quality standards. Construction technology requirements are as follows: template template Panel selection and processing require plate high strength, good toughness and

                    本文档为【王瓜店街道中心小学创建示范市总索引2】，请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑，
                    图片更改请在作品中右键图片并更换，文字修改请直接点击文字进行修改，也可以新增和删除文档中的内容。 
 该文档来自用户分享，如有侵权行为请发邮件ishare@vip.sina.com联系网站客服，我们会及时删除。

                    [版权声明] 本站所有资料为用户分享产生，若发现您的权利被侵害，请联系客服邮件isharekefu@iask.cn，我们尽快处理。

                    本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权，请谨慎使用。

                    网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传，仅限个人学习分享使用，禁止用于任何广告和商用目的。
                

下载需要：免费已有0 人下载

立即下载

王瓜店街道中心小学创建示范市总索引2

你可能还喜欢