The copyright belongs to InnoLux. Any unauthorized use is prohibited.
CHIMEI INNOLUX DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer:
Model Name: AT043TN24 V.7
SPEC NO.: A043-24-TT-71
Date: 2010/04/19
Version: 01
■■■■Preliminary Specification
□□□□Final Specification
Remark
■■■■ Touch Screen Panel (3-in-1FPC)
■■■■ Low Power Consumption
For Customer ’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Lin
2010/04/24
Jack Huang
James Yu
Charlie Chou
2010/04/23
Charlie Chou
2010/04/23
CHIMEI INNOLUX
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
InnoLux copyright 2004
All rights reserved,
Copying forbidden.
Record of Revision
Version Revise Date Page Content
Pre-spec .01 2010/04/19 Initial Release.
CHIMEI INNOLUX
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Contents
1. General Specifications ………………………………………………………………………………1
2. Pin Assignment ……………………………………………………………………………………...2
2.1. TFT LCD Panel Driving Section......................................................................................2
2.2. Touch Screen Panel Section............................................................................................4
3. Operation Specifications………………………………………………………………………………5
3.1. Absolute Maximum Ratings ............................................................................................5
3.2. Typical operation conditions ...........................................................................................6
3.3 Backlight Driving Conditions ..........................................................................................6
3.4. Power Sequence ............................................................................................................7
3.5. Timing Characteristics ....................................................................................................8
3.5.1. Timing Conditions...................................................................................................8
3.5.2. Timing Diagram ......................................................................................................9
4. Touch Screen Panel Specifications ……………………………………………………………..10
4.1. Electrical Characteristics ..............................................................................................10
4.2. Mechanical & Reliability Characteristics ........................................................................ 11
4.3. Linearity Definition .........................................................................................................12
4.4. Housing design guide ……………………………………………………………………………..13
5. Optical Specifications …………………………………………………………………………….....14
6. Reliability Test Items ……………………………………………………………………………….18
7. General Precautions ……………………………………………………………………………….19
7.1. Safety ............................................................................................................................19
7.2. Handling ........................................................................................................................19
7.3. Static Electricity..............................................................................................................19
7.4. Storage ..........................................................................................................................19
7.5. Cleaning ........................................................................................................................19
8. Mechanical Drawing ……………………………………………………………………………….20
9. Package Drawing ……………………………………………………………………………….21
9.1. Packaging Material Table...............................................................................................21
9.2. Packaging Quantity........................................................................................................21
9.3. Packaging Drawing........................................................................................................22
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 1/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1. General Specifications
No. Item Specification Remark
1 LCD size 4.3 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 480 × 3 (RGB) × 272
4 Display mode Normally White, Transmissive
5 Dot pitch 0.066(W) × 0.198(H) mm
6 Active area 95.04(W) × 53.856(H) mm
7 Module size 105.5(W) × 67.2(H) × 4.05(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption 0.558 W(Typ.)
12 Panel Power consumption 0.056 W (Typ.)
13 Weight TBD (Typ.)
Note 1: Refer to Mechanical Drawing.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 2/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
2. Pin Assignment
2.1. TFT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model
is “FH19SC-40S-0.5SH” manufactured by HIROSE.
Pin No. Symbol I/O Function Remark
1 VLED- P Power for LED backlight cathode
2 VLED+ P Power for LED backlight anode
3 GND P Power ground
4 VDD P Power voltage
5 R0 I Red data (LSB)
6 R1 I Red data
7 R2 I Red data
8 R3 I Red data
9 R4 I Red data
10 R5 I Red data
11 R6 I Red data
12 R7 I Red data (MSB)
13 G0 I Green data (LSB)
14 G1 I Green data
15 G2 I Green data
16 G3 I Green data
17 G4 I Green data
18 G5 I Green data
19 G6 I Green data
20 G7 I Green data (MSB)
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 3/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
21 B0 I Blue data (LSB)
22 B1 I Blue data
23 B2 I Blue data
24 B3 I Blue data
25 B4 I Blue data
26 B5 I Blue data
27 B6 I Blue data
28 B7 I Blue data (MSB)
29 GND P Power ground
30 CLK I Pixel clock
31 DISP I Display on/off
32 NC - No connection
33 NC - No connection
34 DE I Data Enable
35 NC - No connection
36 GND P Power ground
37 X1 I/O Right electrode – differential analog
38 Y1 I/O Bottom electrode – differential analog
39 X2 I/O Left electrode – differential analog
40 Y2 I/O Top electrode – differential analog
I: input, O: output, P: Power
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 4/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
2.2. Touch Screen Panel Section
Pin No. Symbol I/O Function Remark
1 X1 Right Right electrode – differential analog
2 Y1 Bottom Bottom electrode – differential analog
3 X2 Left Left electrode – differential analog
4 Y2 Top Top electrode – differential analog
Note: Touch Screen Panel Block
Top View
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 5/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3. Operation Specifications
3.1. Absolute Maximum Ratings
(Note 1)
Values
Item Symbol
Min. Max.
Unit Remark
Power voltage VDD -0.5 5.0 V
Input signal voltage Logic input -0.5 5.0 V
Operation temperature TOP -20 70 ℃ Note 3, 4
Storage temperature TST -30 80 ℃ Note 3, 4
LED Reverse Voltage VR - 1.2 V
Each LED
Note 2
LED Forward Current IF - 25 mA Each LED
Note 1: The absolute maximum rating values of this product are not allowed to be
exceeded at any times. A module should be used with any of the absolute
maximum ratings exceeded, the characteristics of the module may not be
recovered, or in an extreme condition, the module may be permanently
destroyed.
Note 2: VR Conditions: Zener Diode 20mA
Note 3: 90% RH Max. (Max wet temp. is 60℃)
Maximum wet-bulb temperature is at 60℃ or less. And No condensation (no
drops of dew)
(℃)
Note 4: In case of temperature below 0℃,the response time of liquid crystal (LC) becomes
slower and the color of panel darker than normal one.
+60℃℃℃℃, 90%RH
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 6/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.2. Typical operation conditions
Values
Item Symbol
Min. Typ. Max.
Unit Remark
Power voltage VDD 3.1 3.3 3.5 V
Current for Driver IVDD - 17 25 mA VDD = 3.3V
Input logic high voltage VIH 0.8VDD - VDD V
Input logic low voltage VIL GND - 0.2VDD V
Note 1
Note1: CLK, DE, R0~ R7, G0~ G7, B0~ B7.
3.3 Backlight Driving Conditions
Values
Item Symbol
Min. Typ. Max.
Unit Remark
Voltage for LED Backlight VL 25.2 27.9 31.5 V Note 2
Current for LED Backlight IL 18 20 22 mA
LED life time - 20,000 - - Hr Note 1
Note 1: The “LED life time” is defined as the module brightness decrease to 50%
original brightness that the ambient temperature is 25℃ and IL =20mA. The
LED lifetime could be decreased if operating IL is lager than 20 mA.
Note 2: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and
IL =20mA.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 7/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.4. Power Sequence
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
should be as the diagram below.
Symbol Specification Symbol Specification
T1 0≦T1≦10 msec T4 160 msec ≦T4
T2 0≦T2≦100 msec T5 160 msec ≦T5
T3 0≦T3≦200 msec T6 1 msec ≦T6
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 8/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.5. Timing Characteristics
3.5.1. Timing Conditions
Parallel DE mode RGB input timing table
Value
Parameter Symbol
Min. Typ. Max.
Unit
CLK frequency fclk 7 9 12 MHz
DEV period time Tv 277 288 400 H
DEV display area Tvd 272 H
DEV blanking Tvb 5 16 128 H
DEH period time Th 520 525 800 CLK
DEH display area Thd 480 CLK
DEH blanking Thb 40 45 320 CLK
CLK cycle time Tclk 83 110 143 ns
Clock width of high level Tcwh 40 50 60 %
Clock width of low level Tcwl 40 50 60 %
Clock rising time trck - 9 ns
Clock falling time tfck - 9 ns
Data Setup Time tdesu 10 - - ns
Data Hold Time tdahd 10 - - ns
DE Setup Time tdesu 10 - - ns
DE Hold Time tdehd 10 - - ns
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 9/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.5.2. Timing Diagram
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 10/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4. Touch Screen Panel Specifications
4.1. Electrical Characteristics
Value
Item
Min. Typ. Max.
Unit Remark
Linearity -1.5 - 1.5 % Analog X and Y directions
300 - 1500 Ω X
Terminal Resistance
100 - 900 Ω Y
Insulation resistance 25 - - MΩ DC 25V
Voltage - 5 7 V DC
Chattering - - 10 ms 100kΩ pull-up
Transparency 80 - - % JIS K7105
Note: Avoid operating with hard or sharp material such as a ball point pen or a mechanical
pencil except a polyacetal pen (tip R0.8mm or less) or a finger.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 11/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4.2. Mechanical & Reliability Characteristics
Value
Item
Min. Typ. Max.
Unit Remark
Activation force 80 - - gf Note 1
Durability-surface
scratching
Write
100,000
- - characters Note 2
Durability-surface
pitting
1,000,000 - - touches Note 3
Surface hardness 3 - - H JIS K5400
Note 1: Activation force test condition
(1) Input DC 5V on X direction, Drop off Polyacetal Stylus (R0.8), until
output voltage stabilize ,then get the activation force。
(2) R8.0mm Silicon rubber for finger Activation force test
(3) Test point: 9 points
Note 2: Measurement for surface area.
-Scratch 100,000 times straight line on the film with a stylus change every 20,000
times.
-Force: 250gf.
-Speed: 60mm/sec.
-Stylus: R0.8 polyacetal tip.
Note 3: Pit 1,000,000 times on the film with a R0.8 silicon rubber.
-Force: 250gf.
-Speed: 2times/sec.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 12/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4.3. Linearity Definition
Va: maximum voltage in the active area of touch panel
Vb: minimum voltage in the active area of touch panel
X: random measuring point
Vxm: actual voltage of Lx point
Vxi: theoretical voltage of Lx point
Linearity = [|Vxi-Vxm |/(Va-Vb)]*100%
Note: Test area is as follows and operation force is 150gf.
2.0mm Test Area
Active Area
2.0mm
2.0mm
2.0mm
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 13/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4.4. Housing design guide
Housing design follow as below
1) Avoid the design that housing overlap and press on the active area of the LCM
2) Give enough gap(over 0.5mm at compressed) between the housing and TSP
to
protect wrong operating.
3) Use a buffer material(Gasket) between the TSP and housing to protect
damage and wrong operating
4) Avoid the design that buffer material overlap and press on the inside of TSP
view area.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 14/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
5. Optical Specifications
Values
Item Symbol Condition
Min. Typ. Max.
Unit Remark
θL Φ=180°(9 o’clock) 60 70 -
θR Φ=0°(3 o’clock) 60 70 -
θT Φ=90°(12 o’clock) 40 50 -
Viewing angle
(CR≥ 10)
θB Φ=270°(6 o’clock) 60 70 -
degree
Note 1
Note 7
TON - 10 20 msec Note 3
Response time
TOFF - 15 30 msec Note 3
Contrast ratio CR 400 500 - - Note 4
WX 0.26 0.31 0.36 -
Color chromaticity
WY 0.28 0.33 0.38 -
Note 2
Note 5
Note 6
Note 7
Luminance L 350 400 - cd/m² Note 6
Luminance uniformity YU
Normal
θ=Φ=0°
70 75 - % Note 8
Test Conditions:
1. VDD=3.3V, IL=20mA (Backlight current), the ambient temperature is 25℃.
2. The test systems refer to Note 2.
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 15/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 1: Definition of viewing angle range
Fig. 4-1 Definition of viewing angle
Note 2: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 30 minutes
operation, the optical properties are measured at the center point of the LCD
screen. (Response time is measured by Photo detector TOPCON BM-7, other
items are measured by BM-5A/Field of view: 1° /Height: 500mm.)
Fig. 4-2 Optical measurement system setup
Normal line
θ=Φ=0°
Normal line
θ=Φ=0°
Photo detector
Φ=90°
12 o’clock direction
Φ=270°
6 o’clock direction
Φ=0° Φ=180°
Active Area
500mm
Φ=90°
12 o’clock direction
Φ=270°
6 o’clock direction
Φ=0° Φ=180°
Active Area
θL
θT θB
θR
CHIMEI INNOLUX SPEC NO.: A043-24-TT-71
Date : 2010/04/19 Page : 16/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 3: Definition of Response time
The response time is defined as the LCD optical switching time interval
between “White” state and “Black” state. Rise time (TON) is the time between
photo detector output intensity changed from 90% to 10%. And
本文档为【AT043TN24 V.7 pre-spec(V01) 04192】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。