XFTC300 Miniature Load Cell
XFTC300_en_RevA www.sensorway.cn 2010-12-20
1/4
• 0-2N to 0-2kN [0.4 lbf to 400 lbf]
• Tension and/or Compression
• High Stiffness
• For Static and Dynamic Applications
• Threaded Male Mechanical Fitting
• High Level Output Model with Integrated
Amplifier
• High Overload Capacity
DESCRIPTION
The XFTC300 series has been specifically developed to measure tension and/or compression in static
and dynamic applications. The miniature size and light-weight facilitate testing where these conditions are
necessary.
The sensing element is fitted with a fully temperature compensated Wheatstone bridge equipped with
high stability micro-machined silicon strain gages. The use of silicon strain gages optimizes the load cell’s
performance at low ranges and frequencies. For sensors with a range of between 2 and 2kN, a high-level output
model is available. With two male threads, the XFTC300 is easily installed in industrial or OEM applications. A
strain relief spring strengthens the cable output.
With many years of experience as a designer and manufacturer of sensors,
Measurement Specialties, Inc. often works with customers to design or customize sensors for specific uses and
testing environments. To meet your needs we also offer complete turnkey systems. The matched components
(sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.
FEATURES APPLICATIONS
• Small design easy to mount • Dynamic strain cylinder regulation
• Tension and/or Compression • Miniature press-fit device
• Heavy duty • Fatigue test benches
• Wide temperature range in option • Robotics regulation
• Easy to customize signal and design • Small size actuators
STANDARD RANGES
F.S. Ranges in N 2 - 5 - 10 - 20 - 50 100 - 200 500 – 1k 2k
F.S. Ranges in lbf 0.4 - 1 - 2 - 4 - 10 20 - 40 100 – 200 400
Stiffness in N/m 3.8x105 to 4.7x107 7.9x107 to 2.2x108 3.4x108 to 9.6x108 2.7x109
Stiffness in lbf/ft 2.6x104 to 3.2x105 5.4x105 to 1.5x107 2.3x107 to 6.6x107 1.9x108
Material Aluminum Stainless Steel
XFTC300 Miniature Load Cell
XFTC300_en_RevA 2010-12-20
2/4
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 20±1º C (unless otherwise specified)
Electrical Characteristics
Model XFTC300 XFTC300-A1 XFTC300-A2
Supply Outage 10Vdc 10 – 30Vdc ±15Vdc (±12 to ±18Vdc)
F.S. Output ±100mV ±2V ±5% F.S. ±5V ±5% F.S.
Zero Offset <±10mV 2.5V ±5% F.S. 0V ±5% F.S.
Input Impedance/Consumption 1000 to 3000Ω <30mA 30mA
Output Impedance 500 to 1000Ω <10Ω <10Ω
Insulation under 50Vdc ≥100MΩ ≥100MΩ ≥100MΩ
Notes
1. Shielded cable with 4 Teflon wires (AWG36/28), standard length 2 m [6.5 ft] with strain relief spring
2. Material: Body in stainless steel or aluminum alloy depending on F.S., ; Two male threads M5 or [10-32 UNF], M10 or
[3/8-24 UNF] depending on F.S. (metric thread is standard)
3. Protection Index: IP50 (other levels available on request)
4. A1 and A2 options are only available for ranges 500N, 1kN and 2kN
PARAMETERS
Operating Temperature Range (OTR) -40 to 120° C [-40 to 248° F]
Compensated Temperature Range (CTR) 0 to 60º C [32 to 140° F]
Zero Shift in CTR <2% F.S. / 50º C [100° F]
Sensitivity Shift in CTR <2% of reading / 50º C [100° F]
Range (F.S.) 0-2N to 0-2kN [0-0.4 lbf to 0-400 lbf]
Over-Range
Without Damage 2 to 4 x F.S.
Without Destruction 3 to 6 x F.S.
Accuracy
Linearity ≤±0.5% F.S.
Hysteresis ≤±0.5% F.S.
www.sensorway.cn
XFTC300 Miniature Load Cell
XFTC300_en_RevA 2010-12-20
3/4
DIMENSIONS & WIRING SCHEMATIC (IN METRIC AND IMPERIAL)
Dimensions in mm [inch]
Full Scale Range in N
[in lbf]
2 - 5 - 10 - 20 -50
[0.4 - 1 - 2 - 4 - 10]
100 - 200
[20 - 40]
500 - 1000
[100 - 200]
2000
[400]
A 36 [1.42] 36 [1.42] 46 [1.81] 46 [1.81]
B (Thread) M5 M5 M10 M10
C 8 [0.31] 8 [0.31] 12 [0.47] 16 [0.63]
Ø D 10 [0.39] 10 [0.39] 16 [0.63] 20 [0.79]
Material Aluminum Alloy Stainless Steel
Stiffness in N/m 3.8x105 to 4.7x107 7.9x107 to 2.2x108 3.4x108 to 9.6x108 2.7x109
Stiffness in lbf/ft 2.4x104 to 3.2x106 5.4x106 to 1.5x107 2.3x107 to 6.6x107 1.9x108
Over-range x4 x3 x3 x2
Separate data sheets are available for load cells with two male/female
threads, reference XFTC310, and two female threads, reference
XFTC320.
Other threads possible on request.
XFTC300-A1
XFTC300-A2
Wiring Schematic
XFTC300
www.sensorway.cn
XFTC300 Miniature Load Cell
XFTC300_en_RevA 2010-12-20
4/4
OPTIONS
A1 : Mono-tension (only available for ranges 500N, 1kN and 2kN)
A2 : Bipolar-tension (only available for ranges 500N, 1kN and 2kN)
ET1 : CTR -20 to 100º C [-4 to 212° F]
ET2 : CTR -40 to 120º C [-40 to 248° F]
ET3 : CTR -40 to 150º C [-40 to 302° F] OTR=CTR (opti on not compatible with A1 and A2 versions)
HA : Accuracy (CNL&H) ±0.5% F.S. (for models ≥100N; 20lbf)
TS : Tolerance on F.S. output ≤±2% F.S.
LC“x” : Additional cable length to standard length (in m) (Note : “X” = Custom value)
ORDERING INFO
NORTH AMERICA EUROPE ASIA
Measurement Specialties, Inc.
1000 Lucas Way
Hampton, VA 23666
USA
Tel: 1-757-766-1500
Fax: 1-757-766-4297
pvg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-Sous-Bois,
France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
pfg.cs.emea@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein.
Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular
purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do
vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts.
Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
北京赛斯维测控技术有限公司
北京市朝阳区望京西路48号
金隅国际C座1002
电话:+86 010 8477 5646
传真:+86 010 5894 9029
邮箱:sales@sensorway.cn
http://www.sensorway.cn
www.sensorway.cn
本文档为【XFTC300力传感器】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。