7410_TTL_3输入端3与非门

TL/F/6500 5 4 1 0 / D M 5 4 1 0 / / D M 7 4 1 0 T rip le 3 -In p u t N A N D G a te s June 1989 5410/DM5410/DM7410 Triple 3-Input NAND Gates General Description This device contains three independent gates each of which performs the logic NAND function. Features Y Alternate Military/Aerospace device (5410) is available. Contact a National Semiconductor Sales Office/Distrib- utor for specifications. Connection Diagram Dual-In-Line Package TL/F/6500–1 Order Number 5410DMQB, 5410FMQB, DM5410J, DM5410W or DM7410N See NS Package Number J14A, N14A or W14B Function Table Y e ABC Inputs Output A B C Y X X L H X L X H L X X H H H H L H e High Logic Level L e Low Logic Level X e Either Low or High Logic Level C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A. Absolute Maximum Ratings (Note) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range DM54 and 54 b55§C to a125§C DM74 0§C to a70§C Storage Temperature Range b65§C to a150§C Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaran- teed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. Recommended Operating Conditions Symbol Parameter DM5410 DM7410 Units Min Nom Max Min Nom Max VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V VIH High Level Input Voltage 2 2 V VIL Low Level Input Voltage 0.8 0.8 V IOH High Level Output Current b0.4 b0.4 mA IOL Low Level Output Current 16 16 mA TA Free Air Operating Temperature b55 125 0 70 §C Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units (Note 1) VI Input Clamp Voltage VCC e Min, II e b12 mA b1.5 V VOH High Level Output VCC e Min, IOH e Max 2.4 3.4 V Voltage VIL e Max VOL Low Level Output VCC e Min, IOL e Max 0.2 0.4 V Voltage VIH e Min II Input Current @ Max VCC e Max, VI e 5.5V 1 mA Input Voltage IIH High Level Input Current VCC e Max, VI e 2.4V 40 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b1.6 mA IOS Short Circuit VCC e Max DM54 b20 b55 mA Output Current (Note 2) DM74 b18 b55 ICCH Supply Current with VCC e Max 3 6 mA Outputs High ICCL Supply Current with VCC e Max 9 16.5 mA Outputs Low Switching Characteristics at VCC e 5V and TA e 25§C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter Conditions Min Max Units tPLH Propagation Delay Time CL e 15 pF 22 ns Low to High Level Output RL e 400X tPHL Propagation Delay Time 15 ns High to Low Level Output Note 1: All typicals are at VCC e 5V, TA e 25§C. Note 2: Not more than one output should be shorted at a time. 2 Physical Dimensions inches (millimeters) 14-Lead Ceramic Dual-In-Line Package (J) Order Number 5410DMQB or DM5410J NS Package Number J14A 14-Lead Molded Dual-In-Line Package (N) Order Number DM7410N NS Package Number N14A 3 5 4 1 0 / D M 5 4 1 0 / / D M 7 4 1 0 T ri p le 3 -I n p u t N A N D G a te s Physical Dimensions inches (millimeters) (Continued) 14-Lead Ceramic Flat Package (W) Order Number 5410FMQB or DM5410W NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd. 1111 West Bardin Road Fax: (a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge@ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: (a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: (a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: (a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: (a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.