产品规格书

产 品 规 格 说 明 书 关于书的成语关于读书的排比句社区图书漂流公约怎么写关于读书的小报汉书pdf 1基本描述General Description 本文件与相应的图纸和BOM确定了1361XX系列多士炉的规格。 This document, with the corresponding drawings and BOM, defined the specification of the toaster 1361XX series. 这是一款中价位的斜多士炉，具备5档烧色控制加CANCEL、BAGEL、DEFROST、REHEAT功能。大身材料为PP，顶盖材料为Gloss S/S。 This is a middle price point slant toaster with a plastic PP housing and Gloss S/S top cover. A browning color switch provided a five color control and another switch provided BAGEL、DEFROST、REHEAT function. The CANCEL switch can be pressed to interrupt toasting at any time. 2 结构描述Construction Description 2.1机械结构 Mechanical construction 2.1.1外壳组件Housing sub-assembly 2.1.1.1顶盖：镜面不锈钢SUS430，厚度0.4，顶盖装上支撑条(PA)，支撑条固定在前、后壳上。 Top Cover: Gloss SUS430 with thickness of 0.4mm screwed on Supporting Block(PA) which is fit on Front and Back Housing. 2.1.1.2前壳：材料为PP，黑色， 表 关于同志近三年现实表现材料材料类招标技术评分表图表与交易pdf视力表打印pdf用图表说话 pdf 面蚀纹(JS6281)，设有中间槽以锁住滑槽盖。前壳与后壳以造型配合。 Front Housing: Matt black plastic (PP, Textured JS6281) Front Housing with middle slot for the Slot Cover and flush with Back Housing. 2.1.1.3后壳：材料为PP，黑色，表面蚀纹(JS6281)，设有中间槽以锁住滑槽盖。后壳与前壳以造型配合。 Back Housing: Matt black plastic (PP, Textured JS6281) Back Housing with middle slot for the Slot Cover and flush with Front Housing. 2.1.1.4滑槽盖：材料为PP，黑色，表面蚀纹(JS6281)，与前、后壳以造型配合。 Slot Cover: Matt black plastic (PP, Textured JS6281)Slot Cover is flush with the Front and Back Housing. 2.1.1.5控制面板：材料为ABS，表面镀铬，与前壳以造型配合。 Control Panel: Gloss plastic (ABS, Cr plated) Control Panel is flush with the Front Housing. 2.1.1.6功能按钮：材料为ABS，银色(877C)，与控制面板以造型配合。 Function Button: Silver(877C) plastic(ABS) Function Button is fit clearance into the Control Panel. 2.1.2接渣盘组件Crumb Tray sub-assembly 2.1.2.1接渣盘拉手：材料为PP，黑色，表面蚀纹(JS6281)。 Crumb Tray Handle: Matt black plastic (PP, Textured JS6281). 2.1.2.2接渣盘：材料为覆铝板，厚度0.4，锁扣在接渣盘拉手上。 Crumb Tray: Steel with Al coated (SAlC,t0.4) Crumb Tray is locked on the Crumb Tray Handle. 2.1.3底座：材料为PP，黑色，表面蚀纹(JS6281)，底部可盘绕电源线。 Base: Matt black plastic (PP, Textured JS6281) Base, Bottom side has power cord wiring tab for easy cord storage. 2.1.4升降手柄：材料为ABS，表面镀铬。 Handle Lift: Gloss plastic(ABS), Cr plated. 2.2电气结构 Electrical and electronic construction 2.2.1热敏电阻：型号为TTC3A104J4195E，装在电源PCB板上。 Temperature Compensation Resistance: Type TTC3A104J4195E Temperature Compensation Resistance mounted on the power PCB. 2.2.2烧色按钮：具有1-5档烧色功能可供选择。 Browning Color Switch : 1-5 position for browning color selection. 2.2.3功能按钮：具有BAGEL、DEFROST、REHEAT三种功能选择。 Function Switch: 3 position for BAGEL、DEFROST、REHEAT selection. 2.2.4CANCEL按钮：可随时中止面包烧烤。 CANCEL Switch: If you want to interrupt toasting at any time, press CANCEL Switch. 2.2.5电源线：GS认证，三芯H05VV-F 3G0.75mm^2，耐热70摄氏度，VDE两圆弯插。电源线外露长度不小于0.61M。 Power Cord : GS approved three wire H05VV-F 3G0.75mm^2, 70degC power cord with VDE crook plug. Minimum exposed length not less than 0.61M. 3 性能指标Performance standard 3.1面包尺寸：嘉顿生命面包，型号3288，100*105*12mm Bread Size: Garden life bread 3288, 100*105*12mm. 3.2烧烤标准General toast criteria：Refer to appendix A Setting Criteria LIGHT Within #1 to #3 colors MEDIUM DARK Within #7 to #9 colors 3.3连续操作补偿Repetitive compensation 颜色变化不超过2级，每两个循环间的时间滞延不超过15秒 The color for the repetitive operations shall not vary more than two shades within the given run. The unit must be capable of repeated operations with less than 15 second delay between cycles. 3.4 烧烤一致性Toast pattern 单面颜色变化不超过2级 There shall not be more than two color shades difference from one location to another on a single side. 3.5 烤均衡性Color balance Side to side color balance for regular (two sided) bread toasting: a)，2-slice toasting – within one color shade; 烤2片—一级色差 b），1-slice toasting – within two(three) color shades. 烤1片—两(三)级色差 4 产品寿命Product life 4.1测试条件（环境温度、相对湿度）Test Conditions 环境温度：室温 20～28℃。 Environment Temperature: Room temperature 20～28℃. 相对湿度：35～70%RH。 Relative Humidity: 35～70%RH. 4.2测试方法Test Method 器具连接额定电压，烧色设置在中档，面包槽内模拟满负载，共做2815个循环，每个循环间用风扇吹冷约5分钟。 Unit, at the rated voltage, browning color is setting on MEDIUM, must be tested for 2185 cycles of operation with false bread, and cool down about 5 minutes with fan between cycles. 4.3使用频率Consumer Usage 2次/天；7天/周；52周/年。 2 uses/day；7 days/week；52 weeks/year. 4.4循环周期Duty Cycle 4.5保修期限Warranty Period 一年。 One year. 2 uses/day × 7 day/wk × 52 weeks/year × 1 year = 730 cycles = min. amount of cycles with no failures. 4.6期望寿命Expected Product Life 三年。 Three years. 2 uses/day × 7 day/wk × 52 weeks/year × 3 years = 2185 cycles = min. amount of cycles with 90% reliability. 5 安全性Safety 5.1以下几种情况，机器必须能够安全、正常地运转Unit must work properly and safely when : 1) 230V±10% 额定电压的两个极端情况下 at the two extreme of ±10% rated voltage 230V. 2) 电源有干扰的情况下 power interruption (interference) 5.2不同型号的产品必须达到相应的安全等级，并不只局限于以下标准： Unit, per different model, must comply with the corresponding safety standard included but not limited to the following: 1) IEC60335-1，IEC60335-2-9 家用和类似电器的安全 IEC60335-1，IEC60335-2-9 Safety of Household and similar electrical appliances 2) UL1026家用和类似电器的安全 UL1026 Safety of Household and similar electrical appliances 5.2安全失效 要求 对教师党员的评价套管和固井爆破片与爆破装置仓库管理基本要求三甲医院都需要复审吗 Fail Safe Requirements： 机械防卡死。Jam resistant mechanism. 6 其它质量要求Other General Quality Requirement 除了安规认证外，产品必须达到但不局限于以下要求： In additional to agency approval safety standard, product should comply with but not limited to: 1）产品认可测试计划( PQTP )：DR/1 PQTP136101A Production Qualification Test Plan (PQTP): DR/1 PQTP136101A 2）质量控制计划( QCP ) : Quality Control Plan (QCP): 3）产品可追逆性控制（日期码控制） Product Traceability Control (date code control): 7 通用要求General Requirements 7.1包装、运输、贮藏Packaging，Shipping & Storage 产品的包装必须符合以下要求 Product packaging should comply with the following packaging requirement： 1) 跌落测试，依据 ISTA 1A Drop test per ISTA 1A 2) 振动测试，依据xxx Vibration test per xxx 3) 堆垛测试，依据xxx Stacking test per xxx 4) 恒温恒湿测试，依据xxx Temperature and humidity chamber test per xxx 7.2可清洁性Cleanability： 可拆洗零部件可放入洗碗机清洗并达到相关的洗碗机测试要求。 All detachable part which intended to be cleaned by user should be dish washer safe and comply with the corresponding dish washer test. 7.3有害物料Hazardous material： 7.3.1与食物接触的零件材料符合FDA或相关要求。 All food contact component must comply with corresponding FDA or EN standard. 7.3.2所有欧洲版本必须达到RoHS标准。 All Europe versions must comply with the corresponding RoHS requirement. 7.6 产品电镀，喷涂及印刷方面的要求： Plating, painting and printed on product : 1）正常工作状态下，产品电镀部位不能有任何脱落而引起安全问题的现象。 All metallic plating must not peer off and cause any safety issue at normal use. 2）产品的喷涂必须通过相关的方格测试，耐磨试验及附着力测试。 All painted must comply with corresponding Cross-hatch Test, Abrasion Test, Adhesion Test. 3）产品的印刷图案必须通过相关的附着力测试。 All artwork printed on the unit must comply with corresponding Adhesion Test. 7.7 商标与铭牌Marking and label 所有的铭牌和警告语的字体， 内容 财务内部控制制度的内容财务内部控制制度的内容人员招聘与配置的内容项目成本控制的内容消防安全演练内容 及材料都必须符合相关的安规要求。 All rating and warning mark must comply with corresponding safety agency requirement for font size, content and material. 8 附录Appendix 8.1 产品规格系列表Serialization list 8.2图片Picture 8.3产品认可测试计划（PQTP） 8.4引用文件/标准Reference doc./Standards 8.4.1 内部 Internal 8.4.2 客户Customers 附录一产品规格系列表Serialization list 产品型号 136101 客户资料 客户名称 暂无 客户型号 暂无 品牌 销售地区 欧洲 产品资料 电压/频率/功率 230V/50Hz/900W 外观颜色 黑色 容量 2 slice 主要功能 烤面包 材料 顶盖 镜面不锈钢SUS430 大身(前、后壳) PP/蚀纹、黑色 底座 PP/蚀纹、黑色 控制面板 ABS/镀铬 升降手柄 ABS/镀铬 功能按钮 ABS/银色 接渣盘拉手 PP/蚀纹、黑色 控制模式 电子式 实体尺寸 实体重量 认证 GS/CB RoHS要求 有 包 装资料 外箱尺寸（mm） 外箱毛重(Kg) 20呎(6m)集装箱装机量 40呎(12m)集装箱装机量 40呎HQ…… 附录二 图片Picture 附录三 产品认可测试计划（PQTP）: content of tests 附录四 引用文件/标准Reference File/Standards Appendix A Bread color Photo