12673_NSC_LM7815

LM78XX Series Voltage Regulators General Description The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range of applications. One of these is local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages available allow these regulators to be used in logic systems, instrumenta- tion, HiFi, and other solid state electronic equipment. Al- though designed primarily as fixed voltage regulators these devices can be used with external components to obtain ad- justable voltages and currents. The LM78XX series is available in an aluminum TO-3 pack- age which will allow over 1.0A load current if adequate heat sinking is provided. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output transistor is provided to limit internal power dissi- pation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit takes over preventing the IC from overheating. Considerable effort was expanded to make the LM78XX se- ries of regulators easy to use and minimize the number of external components. It is not necessary to bypass the out- put, although this does improve transient response. Input by- passing is needed only if the regulator is located far from the filter capacitor of the power supply. For output voltage other than 5V, 12V and 15V the LM117 series provides an output voltage range from 1.2V to 57V. Features n Output current in excess of 1A n Internal thermal overload protection n No external components required n Output transistor safe area protection n Internal short circuit current limit n Available in the aluminum TO-3 package Voltage Range LM7805C 5V LM7812C 12V LM7815C 15V Connection Diagrams Metal Can Package TO-3 (K) Aluminum DS007746-2 Bottom View Order Number LM7805CK, LM7812CK or LM7815CK See NS Package Number KC02A Plastic Package TO-220 (T) DS007746-3 Top View Order Number LM7805CT, LM7812CT or LM7815CT See NS Package Number T03B May 2000 LM 78XX Series V oltage Regulators © 2000 National Semiconductor Corporation DS007746 www.national.com Schematic DS007746-1 LM 78 XX www.national.com 2 Absolute Maximum Ratings (Note 3) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Input Voltage (VO = 5V, 12V and 15V) 35V Internal Power Dissipation (Note 1) Internally Limited Operating Temperature Range (TA) 0˚C to +70˚C Maximum Junction Temperature (K Package) 150˚C (T Package) 150˚C Storage Temperature Range −65˚C to +150˚C Lead Temperature (Soldering, 10 sec.) TO-3 Package K 300˚C TO-220 Package T 230˚C Electrical Characteristics LM78XXC (Note 2) 0˚C ≤ TJ ≤ 125˚C unless otherwise noted. Output Voltage 5V 12V 15V Input Voltage (unless otherwise noted) 10V 19V 23V Units Symbol Parameter Conditions Min Typ Max Min Typ Max Min Typ Max VO Output Voltage Tj = 25˚C, 5 mA ≤ IO ≤ 1A 4.8 5 5.2 11.5 12 12.5 14.4 15 15.6 V PD ≤ 15W, 5 mA ≤ IO ≤ 1A 4.75 5.25 11.4 12.6 14.25 15.75 V VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.5 ≤ VIN ≤ 27) (17.5 ≤ VIN ≤ 30) V ∆VO Line Regulation IO = 500 mA Tj = 25˚C 3 50 4 120 4 150 mV ∆VIN (7 ≤ VIN ≤ 25) 14.5 ≤ VIN ≤ 30) (17.5 ≤ VIN ≤ 30) V 0˚C ≤ Tj ≤ +125˚C 50 120 150 mV ∆VIN (8 ≤ VIN ≤ 20) (15 ≤ VIN ≤ 27) (18.5 ≤ VIN ≤ 30) V IO ≤ 1A Tj = 25˚C 50 120 150 mV ∆VIN (7.5 ≤ VIN ≤ 20) (14.6 ≤ VIN ≤ 27) (17.7 ≤ VIN ≤ 30) V 0˚C ≤ Tj ≤ +125˚C 25 60 75 mV ∆VIN (8 ≤ VIN ≤ 12) (16 ≤ VIN ≤ 22) (20 ≤ VIN ≤ 26) V ∆VO Load Regulation Tj = 25˚C 5 mA ≤ IO ≤ 1.5A 10 50 12 120 12 150 mV 250 mA ≤ IO ≤ 750 mA 25 60 75 mV 5 mA ≤ IO ≤ 1A, 0˚C ≤ Tj ≤ +125˚C 50 120 150 mV IQ Quiescent Current IO ≤ 1A Tj = 25˚C 8 8 8 mA 0˚C ≤ Tj ≤ +125˚C 8.5 8.5 8.5 mA ∆IQ Quiescent Current 5 mA ≤ IO ≤ 1A 0.5 0.5 0.5 mA Change Tj = 25˚C, IO ≤ 1A 1.0 1.0 1.0 mA VMIN ≤ VIN ≤ VMAX (7.5 ≤ VIN ≤ 20) (14.8 ≤ VIN≤ 27) (17.9 ≤ VIN ≤ 30) V IO ≤ 500 mA, 0˚C ≤ Tj ≤ +125˚C 1.0 1.0 1.0 mA VMIN ≤ VIN ≤ VMAX (7 ≤ VIN ≤ 25) (14.5 ≤ VIN≤ 30) (17.5 ≤ VIN ≤ 30) V VN Output Noise Voltage TA =25˚C, 10 Hz ≤ f ≤ 100 kHz 40 75 90 µV Ripple Rejection IO ≤ 1A, Tj = 25˚C or 62 80 55 72 54 70 dB f = 120 Hz IO ≤ 500 mA 62 55 54 dB 0˚C ≤ Tj ≤ +125˚C VMIN ≤ VIN ≤ VMAX (8 ≤ VIN ≤ 18) (15 ≤ VIN ≤ 25) (18.5 ≤ VIN ≤ 28.5) V RO Dropout Voltage Tj = 25˚C, IOUT = 1A 2.0 2.0 2.0 V Output Resistance f = 1 kHz 8 18 19 mΩ LM 78XX www.national.com3 Electrical Characteristics LM78XXC (Note 2) (Continued) 0˚C ≤ TJ ≤ 125˚C unless otherwise noted. Output Voltage 5V 12V 15V Input Voltage (unless otherwise noted) 10V 19V 23V Units Symbol Parameter Conditions Min Typ Max Min Typ Max Min Typ Max Short-Circuit Current Tj = 25˚C 2.1 1.5 1.2 A Peak Output Current Tj = 25˚C 2.4 2.4 2.4 A Average TC of VOUT 0˚C ≤ Tj ≤ +125˚C, IO = 5 mA 0.6 1.5 1.8 mV/˚C VIN Input Voltage Required to Maintain Tj = 25˚C, IO ≤ 1A 7.5 14.6 17.7 V Line Regulation Note 1: Thermal resistance of the TO-3 package (K, KC) is typically 4˚C/W junction to case and 35˚C/W case to ambient. Thermal resistance of the TO-220 package (T) is typically 4˚C/W junction to case and 50˚C/W case to ambient. Note 2: All characteristics are measured with capacitor across the input of 0.22 µF, and a capacitor across the output of 0.1µF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tw ≤ 10 ms, duty cycle ≤ 5%). Output voltage changes due to changes in internal temperature must be taken into account separately. Note 3: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. For guaranteed specifications and the test conditions, see Elec- trical Characteristics. LM 78 XX www.national.com 4 Typical Performance Characteristics Maximum Average Power Dissipation DS007746-5 Maximum Average Power Dissipation DS007746-6 Peak Output Current DS007746-7 Output Voltage (Normalized to 1V at TJ = 25˚C) DS007746-8 Ripple Rejection DS007746-9 Ripple Rejection DS007746-10 LM 78XX www.national.com5 Typical Performance Characteristics (Continued) Output Impedance DS007746-11 Dropout Voltage DS007746-12 Dropout Characteristics DS007746-13 Quiescent Current DS007746-14 Quiescent Current DS007746-15 LM 78 XX www.national.com 6 Physical Dimensions inches (millimeters) unless otherwise noted Aluminum Metal Can Package (KC) Order Number LM7805CK, LM7812CK or LM7815CK NS Package Number KC02A LM 78XX www.national.com7 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 www.national.com TO-220 Package (T) Order Number LM7805CT, LM7812CT or LM7815CT NS Package Number T03B LM 78 XX Se rie s Vo lta ge Re gu la to rs National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. All Datasheets Cannot Be Modified Without Permission Copyright © Each Manufacturing Company This datasheet has been downloaded from: www.EEworld.com.cn Free Download Daily Updated Database 100% Free Datasheet Search Site 100% Free IC Replacement Search Site Convenient Electronic Dictionary Fast Search System www.EEworld.com.cn